Stand Still

Stand Still
©Barbara Butler
May 2014

Supplies:
Kit-Stand Still by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C&P Element 86 on to the canvas.  Re size it by 45% once.  Place it on the right side.

C&P Element 87 on to the canvas.  Re size it by 45% once.  Place it on the left side.

C&P Element 85 on to the canvas.  Re size it by 75% twice.  Place it in front of the other elements on the left side.

C&P Element 61 on to the canvas.  Re size it by 75% twice.  Place it in front of the feather on the right side.

C&P Element 66 on to the canvas.  Re size it by 45% once.  Place it behind the fan on the right side.

C&P Element 18 on to the canvas.  Place it behind the other elements.  Close the other layers and with the magic wand click on the inside of the frame, expand the selection by 6, add a new layer, paste Pp13 into the selection and move this below the frame in the layer palette.  Select none.

C&P Elemengt 20 on to the canvas.  Re size it by 45% once.  Place it in front of the other elements on the left side.

C&P Element 24 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C&P Elemengt 27 on to the canvas.  Place it on the left side and behind everything else including the frame.

C&P Element 37 on to the canvas.  Re size it by 65% once.  Place it behind the fan on the right side.

C&P Elementg 48 on to the canvas.  Re size it by 65% twice.  Place it in the top right corner.

C&P Element 59 on to the canvas.  Re size it by 45% once.  Place it on top of Element 48.

C&P Elementg 83 on to the canvas.  Re size it by 65% once.  Place it on the top.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Melany

Melany
©Barbara Butler
May 2014

Supplies:
Kit-Melany by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C&P Element 48 on to the canvas.  Re size it by 75% once.  Place it on the bottom.  Click on the inside of each circle with the magic wand, expand by 6, add a new layer and paste Pp19 into the selection.  Select none and move the paper layer down below the frame.

C&P Element 46 on to the canvas.  Re size it by 85% once.  Place it behind Element 48.

C&P Element 47 on to the canvas.  Re size it by 75% once.  Place it in front of the spiderweb.  Close off all the other layers and click on the inside (you can open the other layers now), expand the selection by 6, add a new layer and paste Pp2 into the selection.  Select none, and move the paper down below the frame.

C&P Element 53 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C&P Element 56 on to the canvas.  Re size it by 45% once.  Place it on the bottom left.  Rotate it 15 degrees to the left.

C&P Element 54 on to the canvas.  Re size it by 65% once.  Place it behind Element 48 and the paper layer.  Rotate it 15 degrees to the left.

C&P Element 72 on to the canvas.  Re size it by 65% once.  Place it in front of the elements on the left side.

C&P Element 85 on to the canvas.  Re size it by 65% once.  Now take your selection tool and draw a rectangle around one of the butterflies, cut it out and paste it back on to the canvas.  Now place them both where you would like them.

C&P Element 96 on to the canvas.  Re size it by 45% once.  Place it behind the cat on the left side and to the left of the jacket.

C&P Element 102 on to the canvs.  Re size it by 45% once.  Place it behind the car on the right.

C&P Element 21 on to the canvas.  Re size it by 65% once.  Place it where you would like and if you want rotate it 15 degrees either to the left or to the right.

C&P Element 8 on to the canvas.  Re size it by 65% once.  Place it on the bottom and behind the other elements but leave it in the center.

C&P Element 26 on to the canvas.  Re size it by 65% once.  Place it on the right side and flip it horizontally.

C&P Element 27 on to the canvas.  Place it to your liking.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Self

Self
©Barbara Butler
May 2014

Supplies:
Kit-Self by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C&P Element 36 on to the canvas.  Re size it by 85% once.  Paste Pp3 on to the canvas.  Close all layers except the frame layer, click on the outside of the frame with the magic wand expand the selection by 6, open up the paper layer, hit the delete key.

C&P Element 14 on to the canvas.  Re size it by 45% once then again by 85% once.  Rotate it 30 degrees to the left.  Place it in the bottom left corner.

C&P Element 17 on to the canvas.  Re size it by 75% once.  Place it on the left side.  Rotate it 15 degrees to the right.  Place it behind Element 15.

C&P Element 23 on to the canvas.  Re size it twice, once by 45% then by 75%.  Place it in the bottom right corner.

C&P Element 26 on to the canvas.  Re size it by 75% twice.  Place it behind Element 23.

C&P Element 42 on to the canvas.  Re size it by 75% three times.  Place it in front of Element 14.

C&P Element 43 on to the canvas.  Re size it twice once by 45% then by 50%.  Place beside the cat on the left.

C&P Element 55 on to the canvas.  Re size it by 50% once.  Place it in front of the elements on the right side.

C&P Element 57 on to the canvas.  Re size it by 50% once.  Place it where you would like.

C&P Element 52 on to the canvas.  Place it to your liking.

C&P Element 27 on to the canvas.  Re size it by 50% once.  Place it in the middle but on the bottom of the frame.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Mami

Mami
©Barbara Butler
May 2014

Supplies:
Kit-Mami by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-584mpm by Millies Psp Madness

Open up template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Delete the copyright layer.  Re size the canvas to about 843X800.

Layers 1&2-Select all, float, defloat.  Paste Pp5 into the selection.  Select none.

Layers 3&4-Select all, float, defloat.  Paste Pp2 into the selection.  Select none.

Layers 5&6-Select all, float, defloat.  Paste Pp4 into the selection.  Select none.

Layer 7-Select all, float, defloat.  Paste Pp18 into the selection.  Select none.

Layers 8&9-Select all, float, defloat.  Paste Pp19 into the selection.  Select none.

Layers 10&11-Select all, float, defloat.  Paste Pp17 into the selection.  Select none.

Layer 12-Select all, float, defloat.  Paste Pp13 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C&P Element 1 on to the canvas.  Re size it by 70% once.  Place it on the bottom left.

C&P Element 2 on to the canvas.  Re size it by 70% once.  Place it beside Element 1.

C&P Elementg 10 on to the canvas.  Re size it by 70% once.  Place it on the top right.

C&P Elemengt 15 on to the canvas.  Re size it by 70% once.  Place it on the bottom right.

C&P Element 13 on to the canvas.  Place it on the top right and send to the bottom in the layer palette.

C&P Element 14 on to the canvas.  Place it behind Element 15 on the right side.

C&P Element 27 on to the canvas.  Re size it by 70% once.  Place it on the top left.

C&P Element 36 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the left.

C&P Element 50 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tropical Fairytale

Tropical Fairytale
©Barbara Butler
May 2014

Supplies:
Kit-Tropical Fairyland by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C&P Element 35 on to the canvas.  Re size it by 85% once.

C&P Element 18 on to the canvas twice.  Re size one by 65% twice, and the other by 75% twice re size the back one again by 65%.  Place them both in the top right corner of the towel.

C&P Element 36 on to the canvas.  Re size it by 65% twice.  Place it in the top left corner.  Flip it horizontally.

C&P Element 39 on to the canvas.  Re size it by 50% once.  Place it on the left side and behind the flip flops.

C&P Element 52 on to the canvas.  Re size it twice once by 50% then 65%.  Place it in the bottom left corner of the towel.

C&P Element 64 on to the canvas.  Re size it by 65% once.  Place it in the bottom right corner of the towel.

C&P Element 67 on to the canvas.  Place it behind the crates in the top right corner.

C&P Element 85 on to the canvas.  Re size it by 75% once.  Place it behind the elements in the top left corner.

C&P Element 108 on to the canvas.  Re size it by 65% once.  Place it on the top of the towel.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Down By The Sea

Down By The Sea
©Barbara Butler
May 2014

Supplies:
Kit-Super E by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C&P Element 72 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand, expand the selection and paste Pp5 as a new layer, invert the selection and hit the delete key.

C&P Element 14 on to the canvas.  Place it on the left side, and duplicate it.

C&P Element 27 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the left and place it on the left side.

C&P Element 39 on to the canvas.  Place it on the right side.

C&P Elemengt 6 on to the canvas.  Place it on the bottom right.

C&P Elemengt 9 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the left side.

C&P Element 23 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind everything else.

C&P Elemengt 41 on to the canvas.  Re size it by  75% once.  Place it on the bottom.

C&P Elemengt 42 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and rotate it 30 degrees to the right.  Place it on the left side and behind Element 41.

C&P Element 66 on to the canvas.  Place it on the bottom and behind the other elements (except the shell frame).

Add a gradient glow to some of the elements to make them pop a little.  I added it to the shell frame, both set of leaves, and the leave element on the right side.  But this step is completely up to you.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Aquatic Red Carpet Look

Aquatic Red Carpet Look
©Barbara Butler
May 2014

Supplies:
Kit-Aquatic Red Carpet Look by Amy Marie.  This kit can be found at www.amymarieskits.com

C&P Element 90 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C&P Element 85 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom right.

C&P Element 68 on to the canvas.  Place it on the bottom and in front of the other elements.

C&P Element 61 on to the canvas.  Re size it by 65% once.  Place it on top of Element 90.

C&P Element 50 on to the canvas.  Flip it horizontally and place it on the right and behind the other elements.

C&P Element 49 on to the canvas.   Place it in front of Element 50.  Flip it horizontally.

C&P Element 44 on to the canvas.  Place it behind the other elements.

C&P Element 46 on to the canvas.  Place it in front of the other elements.

C&P Element 39 on to the canvas.  Re size it by 75% once.  Place it in front of Element 44.

C&P Element 43 on to the canvas.  Place to your liking.

C&P Element 35 on to the canvas.  Re size it by 75% twice.  Place it on top of Element 39.

C&P Element 34 on to the canvas. Re size it by 50% once.  Place it on the bottom left.

C&P Element 25 on to the canvas.  Re size it by 75% once.  Place it behind Element 34.

Paste Papers 1&4 on to canvas.  Place them both behind everything.  Apply mask to both and merge the mask group.  Have Pp4 on top of the other and re size it by 85% once.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Aquatic Beauty

Aquatic Beauty
©Barbara Butler
May 2014

Supplies:
Kit-Aquatic Beauty by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84

New Image 800X600 72DPI

Select all and paste Pp1 into the selection.  Select none.  Apply the mask and merge the mask group.

C&P Element 7 on to the canvas.  Re size it by 65% once.  Place it int the top left corner.

C&P Element 14 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C&P Element 18 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C&P Element 24 on to the canvas.  Re size it by 75% once.  Place it behind the rock on the left side.

C&P Element 25 on to the canvas.  Re size it by 75% once.  Place it behind Element 18 on the right.

C&P Element 27 on to the canvas.  Place it behind the other elements.

C&P Element 26 on to the canvas.  Re size it by 75% three times.  Place it on the left side of Element 25 and behind it.

C&P Element 33 on to the canvas.  Re size it by 65% twice.  Place it where you would like.

C&P Element 34 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the lefts side and where it is sticking out on the right side.

C&P Element 61 on to the canvas.  Re size it by 50% once.  Place it in front of the elements on the right side.

C&P Element 87 on to the canvas.  Place it behind the other elements.

C&P Element 86 on to the canvas.  Re size it by 65% twice.  Place it in front of the elements on the left side.

C&P Element 89 on to the canvas.  Place it behind the elements on the right side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Summer Breeze

Summer Breeze
©Barbara Butler
May 2014

Supplies:
Kit-Splash of Summer by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-CM_BB_ForumStyleMask1_MBW.  This I do believe you can fine at the Creative Misfits Blog.

We're going be making a banner and avatar so for the banner open up a new image about 600X250 72DPI. 

Select all and paste Pp5 into the selection.  Select none.  Apply the mask and merge the mask group.  Apply an inner bevel with the following settings:  2, 9, 0, 1, 6, 0, 315, 50,30, white.

Add a new layer, select all and paste Pp9 into the selection.  Move this down below the mask layer.  Go to effects and under image effects go to seamless tiling and apply it with the default settings.

C&P Element 7 on to the canvas.  Re size it twice, once by 45% then by 75%.  Place it in the bottom left corner.  Bring it to the top.

C&P Element 15 on to the canvas.  Re size it by 65% three times.  Flip it horizontally and place it in the top right corner.

C&P Element 28 on to the canvas.  Re size it by 45% once.  Place it on the bottom right.

C&P Element 29 on to the canvas.  Re size it by 45% twice.  Place beside the sunglasses.

C&P Element 35 on to the canvas.  Re size it by 45% once.  Place it behind the flower on the left side.

C&P Element 36 on to the canvas.  Re size it by 50% twice.  Place it towards the right.

C&P Element 51 on to the canvas.  Place it on the right side. 

C&P Element 69 on to the canvas.  Place this in front of the dolphin so it looks like the dolphin is jumping out of it.

Add a new layer, bring this to the top and C&P Element 64 into the selection.  Go back to the sunglasses and the seashell on the right side and bring them to the top.  With the sunglasses re size them one more time by 50%.  Do the same witht the elements on the left.  Re size the flower again by 65%.

For the avatar draw out a 200x200 rectangle.  Close all the layers except the yellow paper.  On the yellow paper copy and paste this as a new image.  Add a new layer, select all and paste Pp5 into the selection, select none and apply the same mask as before merge the mask group.  Add the same inner bevel.  Paste your tube of choice and re size it as needed.  Crop the image back down to 200 (if the tube is too big).  Add another new layer Select all and paste Element 64 into the selection.  Select none.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Splash Of Summer

Splash of Summer
©Barbara Butler
May 2014

Supplies:
Kit-Summer Splash by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-582MPM by Millies PspMadness

Open up the template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Delete the copyright layer.  Re size the canvas to 950X697.

Layers 1&2-Select all, float, defloat.  Paste Pp3(the one you want doesnt have Pp in front of it) as a new layer, invert the selection and hit the delete key.  Select none.  Close or Delete the original layers.

Layers 3&4-Select all, float, defloat.  Paste Pp5 as a new layer, invert the selection and hit the delete key.  Select none.  Close or delete the original layers.

Layer 5-Select all, float, defloat.  Paste Pp11 into the selection, select none.

Layer 6-Select all, float, defloat.  Paste Pp1 as a new layer, invert the selection and hit the delete key.  Select none.  Close or delete the original layer.

Layers 7&8-Select all, float, defloat.  Paste Pp14 as a new layer, invert the selection and hit the delete key.  Select none.  Close or delete the original layers.

Layers 9&10-Select all, float, defloat.  Paste Pp15 as a new layer, invert the selection and hit the delete key.  Select none.  Close or delete the original layers.

C&P Element 3 on to the canvas.  Re size it twice, once by 65% then by 75%.  Place it on the top left.

C&P Element 12 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C&P Element 17 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C&P Element 24 on to the canvas.  Re size it by 75% twice.  Place it behind the bear on the right side.

C&P Element 29 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C&P Element 33 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C&P Element 36 on to the canvas.  Re size it by 75% three times.  Place it on the bottom right.

C&P Element 46 on to the canvas.  Re size it by 50% twice.  Place it on the bottom left.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Take Me Out

Take Me Out
©Barbara Butler
May 2014

Supplies:
Kit-Baseball 4 Girls by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84

New Image 800X600 72DPI

Select all and paste Pp16 into the selection.  Apply the mask and merge the mask group.

C&P Element 6 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C&P Element 4 on to the canvas.  Re size it by 65% twice.  Rotate it 30 degrees to the left and place it behind the glove.

C&P Element 2 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C&P Element 16 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C&P Element 18 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and behind the apple.

C&P Element 20 on to the canvas.  Re size it by 60% twice.  Place it on the bottom left and in front of the other elements.

C&P Element 19 on to the canvas.  Re size it by 60% twice.  Place it behind the elements on the right side.

C&P Element 21 on to the canvas.  Re size it by 60% once.  Place it on the left side and behind the hotdog.

C&P Element 26 on to the canvas.  Re size it by 50% once.  Place it on the right side and behind the glove.

Merge all the elements on the left side together and re size them by 75%.  Do the same with the elements on the right side.

C&P Element 38 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the other elements.

Back on the mask layer select all, float, defloat.  Add a new layer and paste Element 53 into the selection, change the blend mode to Color(L).  Select none.  Select all, float, defloat.  Add another new layer and paste Element 27 into the selection.  Select none.

C&P Element 55 on to the canvas.  Re size it by 75% once.  Place it on the left side of the scoreboard flip it horizontally.  Repeat this with Element 51 but put this one on the right side of the scoreboard (don't flip this one).

C&P Element 59 on to the canvas.  Re size it by 50% once.  Place it anywhere on the field you would like.

C&P Elements 64&66 on to the canvas.  Re size them if you want and place to your liking.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Pretty Linda

Pretty Linda

©Barbara Butler

May 2014

Supplies:

Kit-Pretty Linda by Amy Marie.  This kit can be found at www.amymarieskits.com

Mask-SG_Lacy-Edged

Effects-EyeCandy4000 Glass

New Image 800x600 72DPI

Select all and paste Pp30 into the selection.  Apply the mask and merge the mask group.  Before you apply the mask make sure the invert mask data is checked.  Re size by 65% once. 

C&P Pp9 on to the canvas.  With the magic wand click on the outside of the mask layer and  back on the paper layer hit the delete key.  Now take your selection tool and draw a rectangle around the middle square or you can do a custom selection with the following settings:  Top-153; Left-205; Right-595; Bottom-445, add a new layer and paste Pp6 into the selection.  Move both paper layers below the frame we had made. 

On the frame layer add an inner bevel and a drop shadow of choice.

C&P Element 109 on to the canvas.  Re size it by 65% three times.  Place it on the bottom right.

C&P Element 16 on to the canvas.  Re size it by 65% twice.  Place it in front of Element 109.

C&P Element 6 on to the canvas.  Re size it twice, once by 50% then again 65%.  Place it in the top left corner.

C&P Element 10 on to the canvas.  Re size it twice, once by 50% then by 65%.  Place it in the bottom left corner.

C&P Element 18 on to the canvas.  Re size it by 45% once.  Place it beside Element 10.

C&P Element 17 on to the canvas.  Re size it by 65% once.  Place it behind the other two elements on the left side.

C&P Element 30 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it behind the other elements on the right side.  Rotate it 15 degrees to the right.

C&P Element 31 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind everything.  Duplicate it, flip the duplicate horizontally and place this one on the right side.  Merge the two together and add a drop shadow of choice.

C&P Element 29 on to the canvas.  Re size it where it is smaller then the other elements on the left side.  Place it on the left and in front of the other elements.

C&P Element 52 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind the other elements.  Flip it horizontally.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Back on Pp6 select all, float, defloat, add a new layer and flood fill with the following color #dac5cb; effects, eye candy 4000, glass with the following settings:  Under Settings Tab fine Clear glass, back on the Basic tab change the Opacity to 72 and tinting to 1.  In the layer palette change the blend mode to compliment your tube.  I changed mine to multiply.  Make sure this layer is above the tube.
 

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Totally 80s

Totally 80s
©Barbara Butler
May 2014

Supplies:
Kit-80s Play by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84

New Image 800X600 72DPI

C&P Element 49 on to the canvas.  Re size it by 75% once.  Click on the inside of each square and expand by 5, add a new layer and paste Pp24 into the selection.  Select none.

Add a new layer, select all and paste Pp24 into the selection.  Apply the mask and merge the mask group.  Move this below the paper layer.

C&P Element 8 on to the canvas.  Re size it 65% twice.  Rotate it 15 degrees to the left and place it on the bottom right.

C&P Element 5 on to the canvas.  Re size it twice, once by 50% then by 75%.  Place it on the bottom left.

C&P Element 10 on to the canvas.  Re size it by 50% once.  Rotate it 15 degrees to the left and place it behind Element 5.

C&P Element 15 on to the canvas.  Re size it by 50% once.  Place it on the top right.

C&P Element 19 on to the canvas.  Re size it by 60% once.  Place it on the top left.

C&P Element 34 on to the canvas.  Re size it by 60% once.  Place it on the bottom.

C&P Element 65 on to the canvas.  Re size it by 60% once.  Place it on the right side of Element 5.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Under The Big Top

Under The Big Top
©Barbara Butler
May 2014

Supplies:
Kit-Big Top by Amy Marie.  This kit can be found at www.amymarieskits.com

Mask-WSL 169

New Image 800x600 72DPI
C&P Element 2 on to the canvas.  Re size it by 65% once.  Place it in the middle.

C&P Element 58 on to the canvas.  Re size it by 65% once.  Place it on the left side and below the circus tent.  Duplicate it and move this one over to the right side.

C&P Element 3 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C&P Element 6 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it on the right side.

C&P Element 9 on to the canvas.  Re size it by 50% once.  Place it on the left side.

C&P Element 56 on to the canvas.  Re size it by 65% once.  Place it on the right side.

On the bottom layer select all, paste Pp13 into the selection.  Select none.  Duplicate it and apply the mask to the duplicate, merge the mask group, add a drop shadow with the following settings:  4, 4, 96, 9, #f6f6f0 do this one more time.  C&P Element 63 on to the canvas and place it in the top left corner of the mask layer.

C&P Element 38 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the left, flip it horizontally and place it in the top right corner of the mask layer.

C&P Element 53 on to the canvas.  Place it on the left side and behind the circus tent.

Back on the mask layer select all, float, defloat.  Expand by 19, invert the selection and back on the original paper layer hit the delete key.  If you want you delete anything else that sits on the outside of the selection like the candle fence but this part is completely up to you.

C&P Element 78 on to the canvas.  Re size it by 65% once.  Place in front of the elements on the right side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Ivy Blossom

Ivy Blossom
©Barbara Butler
May 2014

Supplies:
Kit-Ivy Blossom by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL148
Effects-Eyecandy 4000:  Gradient Glow (for copyright and name), Glass

New Image 800x600 72DPI
 
Select all and paste Pp28 into the selection.  Apply the mask.  Merge the mask group.  Apply the glass effect with the following settings from top to bottom:  28.80, 20, inside marquee checked, 3, 16, 87, 0, 24, color white.

C&P Element 100 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.  Flip it horizontally.

C&P Element 5 on to the canvas.  Re size it by 65% once.  Place it on the top in the middle.

C&P Element 12 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C&P Element 21 on to the canvas.  Re size it twice, once by 65% then by 75%.  Place it behind Element 12 on the left side.

C&P Element 41 on to the canvas.  Re size it by 75%.  Place it behind the elements on the left.  Duplicate it and mirror the duplicate.  Move this one over to the right to where the ends meet and merge the two together.

C&P Element 43 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the chair.

C&P Element 47 on to the canvas.  Place it behind all the elements on the bottom but leave it in the middle.

C&P Element 57 on to the canvas.  Re size it by 65% once.  Place it on the right side.  If it overlaps the other elements place it below them in the layers palette.

C&P Element 85 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C&P Element 108 (you can pick one of the other colored butterflies if you want) on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top left.  If you picked either the green or pink butterflies you dont have to flip them.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.