Amethyst Goth

Amethyst Goth

Kit:  Amethyst Goth By Moon Vixen Designs

Tags by Barbara Butler

Scrap Kit:   Amethyst Goth by Moon Vixen Designs.  This kit can be found at the following store

Two Peas In A Pod

Je'Taime

Je'Taime

Kit by Whisper In The Wind

Tags by Barbara Butler

Scrap Kit:  Je'Taime by Whisper In The Wind.  This kit can be found at the following store(s)

PFD, Mystical Scraps, Hania's Design

Two Become One

Two Become One

Kit By Whisper In The Wind

Tags By Barbara Butler of Xoiya's Sweet Creations

Scrap Kit:   Two Become One by Whisper In The Wind.  This kit can be found at the following store(s)

PFD, Mystical Scraps, Hania's Design 

Vows of Forever

Vows of Forever

Kit by Whisper In The Wind

Tags by Barbara Butler

Scrap Kit:  Vows of Forever  by Whisper In The Wind.  This kit can be found at the following store(s)

PFD, Mystical Scraps, Hania's Design 

Merry Christmas Baby

Scrap Kit:  Merry Christmas Baby by Michelle's Myths.  This kit can be found at the following store(s).

Digi Divas, PFD

Holiday Hoopla

Scrap Kit:  Holiday Hoopla by Michelle's Myths.  This kit can be found at the following store(s).

Digi Divas, PFD 

Sweet Dreams

Kit:  Sweet Dreams by Daniela E.  Can be found at 

Digi Divas 

Tropical Paradise

Tropical Paradise

©Barbara Butler

May 2016

Supplies:

Kit:  Tropical Paradise by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Template:  250 by Millies PSP Madness

Tube:  

Font:  

Special Settings:  All Elements will be re sized by 75%.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Close or delete the copyright layer.  Re size the canvas to a bigger size.

PAPERS:

Layer 5:  Select all, float, defloat.  Paste Pp11 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp1 into the selection, select none.  Repeat for Layer 3.

Layer 1:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Layers 7, 8, 9:  Delete these layers.

ELEMENTS:

C/P Element 1 on to the canvas.  Re size it twice.  Place it on the top left.

C/P Element 8 on to the canvas.  Re size it once.  Place it on the bottom left.

C/P Element 9 on to the canvas.  Re size it three times.  Flip it horizontally and place it on the bottom right.

C/P Element 14 on to the canvas.  Re size it four times.  Place it on the left side and flip it horizontally.

C/P Element 28 on to the canvas.  Re size it once.  Rotate it 15 degrees to the right and place it behind the elements on the right side.

C/P Element 45 on to the canvas.  Place it on the bottom right and behind the other elements.

C/P Element 46 on to the canvas.  Re size it twice.  Place it on the bottom and behind the other elements.

C/P Element 51 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

C/P Element 52 on to the canvas.  Re size it once.  Place it on the top left and behind all of the layers.  Duplicate it and place this one on the top right.

C/P Element 59 on to the canvas.  Re size it once.  Place it on the top right and in front of the other elements.

C/P Element 89 on to the canvas.  Re size it once.  Place it on the bottom left and behind the other elements.  Duplicate it and move the duplicate over to the right just a little bit.

C/P Element 96 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Mob Scene

Scrap Kit:  Mob Scene by ChocUK Designs.  This kit can be found at

Digi Divas

Template Forum Set 1 by Me.  These can be found Here.

What The Heart Wants

Kit:  What The Heart Wants by Ally CatsPuurfect Kit Creations.  Can be found at Ally CatsPuurfect Kit Creations 

This Kit Can be Found at any of the following Stores

Artistic Dreams Imaging, Berry Applicious,

 Digi Divas, Digi Graphic Designs 

Reindeer Cutie

Kit: Reindeer Cutie by Amy Marie.  Can be found at

Amy Marie Kits

Reindeer Games

Kit:  Reindeer Games By Amy Marie.  Can be found at Amy Maries Kits

Bookseller

Kit:  Bookseller by Mariel Designs.  This lovely kit is an S&CO Exclusive and can only be found at S&CO.

Midnight Skulls

Kit:  Midnight Skulls by Amy Marie can be found Here 

Treasured Moments Two

Treasured Moments Two

©Barbara Butler

July 2015

Supplies:

Kit:  Treasured Moments 2 by Amy Marie.  This kit can be found at the following stores Amy Maries Kits, PFD, Tiny Turtle

Template:  547 by Millies PSP Madness.

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

Layers 1&2:  Select all, float, deflate.  Paste Pp3 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layers 3&4:  Select all, float, deflate.  Paste Pp4 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layers 5&6:  Select all, float, deflate.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 7:  Select all, float, deflate.  Paset Pp6 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 8:  Select all, float, deflate.  Paste Pp5 into the selection, select none.

C/P Element 2 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 1 on to the canvas.  Re size it by 75% once.  Place it on the bottom.

C/P Element 16 on to the canvas.  Re size it by 75% twice.  Rotate it 15 degrees to the left and place it on the left side.

C/P Element 33 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind Element 2.

C/P Element 44 on to the canvas.  Rotate it 15 degrees to the left and place it behind the elements on the left side.

C/P Element 83 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 92 on to the canvas.  Re size it by 65% once.  Place it on the top left and behind the other elements.

C/P Element 115 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

American Cowboys

American Cowboys

©Barbara Butler

June 2015

Supplies:

Kit:  American Cowboys by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD, Tiny Turtle

Template:  584 by Millies PSP Madness

Open template and check to make sure it is at 72DPI.  Duplicate and close the original.  Delete the copyright layer and re size the canvas to a bigger size.

Layer 12:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp9 into the selection, select none.

Layers 1&2:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp5 into the selection, select none.

Layers 3&4:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp14 into the selection, select none.

Layers 8&9:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp1 into the selection, select none.

Layer 7:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp11 into the selection, select none.

Layers 10&11:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp15 into the selection, select none.

Layers 5&6:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp13 into the selection, select none.

C/P Element 9 on to the canvas.  Place it on the top left and send it to the bottom in the layer palette.

C/P Element 30 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 38 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 37 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind Element 38.

C/P Element 57 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 78 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 82 on to the canvas.  Re size it by 65% once.  Place it on the top.  Add a fat gradient glow using a dark blue and white from the tag.  Add a drop shadow using the following settings V-3, H-5, Opacity 80, Blur 3, Color #f2f2f2.

C/P Element 87 on to the canvas.  Place it on the bottom left and behind Element 30.  Rotate it 15 degrees to the left.  Duplicate it once.

C/P Element 89 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it to the right and behind the cowboy boot.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Zoey

Zoey
©Barbara Butler
May 2015

Supplies:
Kit:  Zoey by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template:  670 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a little bit bigger size for the elements later on.

Layer 1:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp16 into the selection, select none.

Layer 2:  Select all, float, deflate.  Paste Pp10 into the selection, select none.

Layers 3&5:  Select all, float, deflate.  Paste Pp5 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 4:  Select all, float, deflate.  Paste Pp11 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 7:  Select all, float, deflate.  Paste Pp8 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layers 9, 10, and 11:  Select all, float, deflate.  Paste Pp9 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.  On the word art layers (9 and 11) add a gradient glow of choice I used a dark blue from the tag.

C/P Element 6 on to the canvas.  Place it on the bottom left.

C/P Element 10 on to the canvas.  Place it on the top left.

C/P Element 19 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right and place it on the top right.

C/P Element 27 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the left and place it on the top left.  Add a drop shadow using the same dark blue from the gradient glow.

C/P Element 31 on to the canvas.  Place it on the top left and behind Element 27.

C/P Element 50 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and in front of the other elements.

C/P Element 60 on to the canvas.  Place it on the bottom and behind the word art layers.

C/P Element 78 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the left and place it on the left side and behind the bird.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Pirates

Pirates
©Barbara Butler
May 2015

Supplies:
Kit:  Pirates by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL84

New Image 800X600 72DPI

Select all, paste Pp3 into the selection, select none.  Apply the mask and merge the mask group

C/P Element 8 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 13 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of Element 8.

C/P Element 18 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 58 on to the canvas.  Re size it by 65% twice.  Place it on left side and on top of the crates.

C/P Element 69 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 79 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 2 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 73 on to the canvas.  Place it on the right side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Alavda

Alavda
©Barbara Butler
May 2015

Supplies:
Kit:  Alavda by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template:  310 by Millies PSP Madness.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright alyer and re size the canvas so the elements will fit on it properly.

Layers 1&2:  Select all, float, deflate.  Paste pp3 into the selection, select none.

Layer 3:  Select all, float, deflate.  Paste Pp5 into the selection, select none.

Layers 4&5:  Select all, float, deflate.  Paste Pp18 into the selection, select none.

Layer 6:  Select all, float, deflate.  Paste Pp3 into the selection, select none.

Layers 7&11:  Select all, float, deflate.  Paste Pp1 into the selection, select none.

Layers 9&13:  Select all, float, deflate.  Paste Pp4 into the selection, select none.

Layers 8, 10, 12, 14:  Select all, float, deflate.  Paste Pp3 into the selection, select none.

C/P Element 1 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 10 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 11 on to the canvas.  Re size it by 75% three times.  Place it on the left side and to the right of Element 10.

C/P Element 12 on to the canvas.  Re size it by 75% three times.  Place it on the left side and behind Element 11.

C/P Element 15 on to to the canvas.  Re size it by 75% once.  Place it on the right side and behind Element 1.

C/P Element 16 on to the canvas.  Place it on the bottom and center it in the middle.

C/P Element 23 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind Element 1.

C/P Element 24 on to the canvas.  Re size it by 65% three times.  Place it on the top right.

C/P Element 44 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 39 on to the canvas.  Re size it by 65% twice.  Place it on the top.  Add a gradient glow with settings of choice and use a light blue from the tag for the color.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Lilly

Lilly
©Barbara Butler
March 2015

Supplies:
Kit:  Lilly's Easter by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com,
PFD Here, Inzpired Creationz  Here,
Scrapping Your Memories Here
Template:  Hopping by Dee of Dees'Sign Depot.

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Re size the canvas so the elements will fit later on.  Delete the copyright, font info, and background layers.

Bottom and Top Dark Green Rectangles:  Select all, float, deflate.  Paste Pp12 into the selection, select none.

Pink Oval:  Select all, float, deflate.  Paste Pp16 into the selection, select none.

Light Green Circle:  Select all, float, deflate.  Paste Pp11 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Top and Bottom Plum Square:  Select all, float, deflate.  Paste Pp3 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Top&Bottom Creme Squares:  Select all, float, deflate.  Paste Pp13 into the selection, select none.

Top and Bottom Rings:  Flood fill with a dark color from the rest of the tag.  Add a weave with settings that match your color choice.

White Oval:  Using the manual color changing tool change it to a color of choice.  Do the same with the Hop Trail White layer.

Word Art Layers:  Flood fill with a color of your choice.  For the whtie background use a contrasting or darker color from the top layer.

C/P Element 18 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 36 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C/P Element 59 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the left and place it on the top right.

C/P Element 75 on to the canvas.  Re size it by 65% twice.  Place it on the bottom

C/P Element 72 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the right and place it behind the elements on the left side.

C/P Element 57 on to the canvas.  Place it on the top right.

C/P Element 52 on to the canvas.  Place it on the top left.

C/P Element 39 on to the canvas.  Re size it by 75% twice.  Place it on the top left.

Depending on the Tube you choose this next element is optional.  C/P Element 60 on to the canvas.  If your tube doesnt have legs like mine doesnt place it in front of the tube where the legs would be.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.