A Walk Along The Beach

Scrap Kit:  A Walk Along In The Beach by Whisper In The Wind.  This kit can be found at the following store(s)

PFD, Mystical Scraps, Hania's Design 

Summer Rose

Summer Rose

©Barbara Butler

June 2016

Supplies:

Kit:  Summer Rose by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Mask:  WSL194

Special Settings:  Elements will be re sized by 75% unless otherwised stated.  But not all will be re sized.

New Image 800X600 72DPI. 

Select all, paste Pp2 into the selection, select none.  Apply the mask and merge the group.

C/P Element 4 on to the canvas.  Re size it three times.  Place it on the bottom right.

C/P Element 17 on to the canvas.  Re size it twice.  Place it on the right side and behind Element 4.

C/P Element 36 on to the canvas.  Re size it once.  Flip it horiozntally and place it on the left side.  Rotate it 15 degrees to the left.

C/P Element 49 on to the canvas.  Place it on the top left.

C/P Element 55 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 61 on to the canvas.  Place it where you would like.

C/P Element 71 on to the canvas.  Re size it three times.  Place it on the bottom left and in front of the other elements.  Duplicate it and place this one on the bottom right.

C/P Element 74 on to the canvas.  Place it on the right side.

C/P Element 78 on to the canvas.  Re size it once.  Place it towards the left.  Duplicate it and place this one towards the right.

C/P Element 79 on to the canvas.  Re size it once.  Place it to your liking.

C/P Element 65 on to the canvas.  Place it behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Hello Sunshine

Hello Sunshine

©Barbara Butler

June 2016

Supplies:

Kit:  Hello Sunshine by Amy Marie.  This kit can be found at 

Amy Marie Kits

 Template:  210 by Designs by Vaybs

Special Settings:  All Elements will be re sized by 75% unless otherwised stated (some wont be re sized at all).

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size so the elements will fit later on.

PAPERS:

Raster 4:  Select all, float, defloat.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this for the copy layers of Raster 4 (but not the glitter layers).  The other Copies of Raster 4:  Select all, float, defloat.  Paste Pp21 into the selection, select none.

Raster 5:  Select all, float, defloat.  Paste Pp7 into the selection, select none.  Apply a wood grain texture of choice.

Raster 7:  Select all, float, defloat.  Paste Pp6 into the selection, select none.  Apply a gradient glow of choice.

Raster 8:  Select all, float, defloat.  Paste Pp16 into the selection, select none.  Apply a gradient glow of choice.

Raster 10:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Raster 2:  Select all, float, defloat.  Paste Pp22 into the selection, select none.

Raster 1:  Select all, paste Pp19 into the selection, select none.  Apply a mask of choice (I used WSL84), merge group.

Raster 9:  Select all, float, defloat.  Paste Pp16 into the selection, select none.  Apply a gradient glow of choice.

ELEMENTS:

C/P Element 5 on to the canvas.  Re size it once.  Rotate it 15 degrees to the right and place it on the bottom right.

C/P Element 8 on to the canvas.  Re size it twice.  Flip it horizontally and place it on the bottom left.

C/P Element 12 on to the canvas.  Re size it once.  Place it on the left side and behind Element 8.

C/P Element 34 on to the canvas.  Re size it twice.  Place it on the bottom right and in front of the other elements.

C/P Element 44 on to the canvas.  Place it on the left side and behind Element 8.

C/P Element 46 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 51 on to the canvas.  Re size it three times.  Flip it horizontally and place it on the top right.  Duplicate it once.

C/P Element 57 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 77 on to the canvas.  Rotate it 15 degrees to the left.  Place it on the right side and behind the crab.

C/P Element 79 on to the canvas.  Re size it once.  Place it on the left side and behind the other elements.  Duplicate it, flip horizontally and move over to the right just a little bit.

C/P Element 88 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 111 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

C/P Element 109 on to the canvas.  Re size it twice.  Place it on the bottom left and behind the drink and cupcake.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Paradise Breeze

Scrap Kit:  Paradise Breeze by Dance In The Rain.  This kit can be found at

Digi Divas

Summer Ice

Summer Ice

©Barbara Butler

May 2016

Supplies:

Kit:  Summer Ice  by Amy Marie.  This kit can be found at 

Amy Marie Kits

 Template:  238 by Millies PSP Madness

Special Settings:  All Elements will be re sized by 75% unless otherwised stated.

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and Word Art Layers.  Re size the canvas so the Elements will fit later on.

PAPERS:

Layer 1:  Select all, float, defloat.  Paste Pp11 into the selection, select none.  Repeat for Layer 2.

Layer 3:  Select all, float, defloat.  Paste Pp16 into the selection, select none.  

Layer 4:  Select all, float, defloat.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 5:  Select all, float, defloat.  Paste Pp10 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat for Layer 6.

Layer 7:  Select all, float, defloat.  Paste Pp22 into the selection, select none.  Repeat for Layer 8.

Layer 9:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

ELEMENTS:

C/P Element 3 on to the canvas.  Re size it twice.  Place it on the bottom left.

C/P Element 15 on to the canvas.  Re size it twice.  Place it on the top right.

C/P Element 21 on to the canvas.  Re size it once.  Place it on the bottom right and duplicate it once so it will show up a little bit better.

C/P Element 19 on to the canvas.  Place it on the bottom left and behind the other elements.

C/P Element 31 on to the canvas.  Re size it three times.  Place it on the bottom right and behind the other elements.

C/P Element 54 on to the canvas.  Place it on the bottom right and behind the other elements.  Duplicate it and move the duplicate to the left just a little bit.  Merge the two together.  Duplicate this one, flip it horizontally and place it behind the elements on the left side.

C/P Element 33 on to the canvas.  Re size it once.  Rotate it 30 degrees to the right and place it on the bottom right and in front of the other elements.

C/P Element 13 on to the canvas.  Re size it once.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tropical Paradise

Tropical Paradise

©Barbara Butler

May 2016

Supplies:

Kit:  Tropical Paradise by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Template:  250 by Millies PSP Madness

Tube:  

Font:  

Special Settings:  All Elements will be re sized by 75%.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Close or delete the copyright layer.  Re size the canvas to a bigger size.

PAPERS:

Layer 5:  Select all, float, defloat.  Paste Pp11 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp1 into the selection, select none.  Repeat for Layer 3.

Layer 1:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Layers 7, 8, 9:  Delete these layers.

ELEMENTS:

C/P Element 1 on to the canvas.  Re size it twice.  Place it on the top left.

C/P Element 8 on to the canvas.  Re size it once.  Place it on the bottom left.

C/P Element 9 on to the canvas.  Re size it three times.  Flip it horizontally and place it on the bottom right.

C/P Element 14 on to the canvas.  Re size it four times.  Place it on the left side and flip it horizontally.

C/P Element 28 on to the canvas.  Re size it once.  Rotate it 15 degrees to the right and place it behind the elements on the right side.

C/P Element 45 on to the canvas.  Place it on the bottom right and behind the other elements.

C/P Element 46 on to the canvas.  Re size it twice.  Place it on the bottom and behind the other elements.

C/P Element 51 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

C/P Element 52 on to the canvas.  Re size it once.  Place it on the top left and behind all of the layers.  Duplicate it and place this one on the top right.

C/P Element 59 on to the canvas.  Re size it once.  Place it on the top right and in front of the other elements.

C/P Element 89 on to the canvas.  Re size it once.  Place it on the bottom left and behind the other elements.  Duplicate it and move the duplicate over to the right just a little bit.

C/P Element 96 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Beach Vacation

Kit:  Beach Vacation by Dance In The Rain.  Can be found at 

Digi Divas 

Lilac Waves

Lilac Waves

©Barbara Butler

May 2016

Supplies:

Kit:  Lilac Waves by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Mask:  M4MCApril by Mythical Designs.  Can be found at Creative Misfits Blog

Special Settings:  All Elements will be re sized by 75% unless otherwised stated.

New Image 800X600 72DPI.

Select all, paste Pp10 into the selection, select none.  Apply the mask and merge the group.  Re size it by 75%.  Duplicate it once (this helps it to show a little bit more).

C/P Element 2 on to the canvas.  Place it on the right side.

C/P Element 30 on to the canvas.  Re size it once.  Place it on the left side.

C/P Element 37 on to the canvas.  Re size it once.  Place it on the right side and behind the other elements.

C/P Element 49 on to the canvas.  Re size it twice.  Place it on the left side and in front of the other elements.

C/P Element 47 on to the canvas.  Place it on the left side and behind the other elements.  Rotate it 15 degrees to the left.

C/P Element 50 on to the canvas.  Re size it twice.  Flip it horizontally and place it behind Element 49 on the left side.

C/P Element 63 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

C/P Element 60 on to the canvas.  Re size it once.  Place it on the top right and in front of the other elements.

C/P Element 66 on to the canvas.  Re size it three times.  Rotate it 15 degrees to the left and place it on the bottom right and behind Element 63.

C/P Element 71 on to the canvas.  Re size it by 85% twice.  Place it behind the other elements.  Click on the inside with the magic wand, expand the selection by 12, add a new layer and paste Pp16 into the selection, move the paper below the frame, select none.

C/P Element 77 on to the canvas.  Place it on the top left of the frame and behind the frame and paper layers.

C/P Element 108 on to the canvas.  Re size it once.  Place it on the top right and behind Element 60.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Beach Party

Kit:  Beach Party by Scrappin with Lil Ole Me.  Can be found at 

Digi Divas