Cherish

Cherish
©Barbara Butler
February 2014

Supplies:
Kit-Cherish by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-LBMask2.  This kit can be found at the creative misfits blog.  I'm not sure what set it is in though, but there are tons over there to look through.

New Image 800X600 72DPI

Select all and paste Pp3 into the selection.  Apply the mask and merge the mask group. 
Select all, add a new layer and paste Pp8 into the selection.  Apply the mask again but this time check the Invert Transparency.  Merge the mask group.
Duplicate both layers and re size the duplicates by 65% once.
Re size the originals by 75% each.

Paste Element 8 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.  Apply a drop shadow of choice.

Paste Element 18 on to the canvas.  Re size it by 60% once.  Place it on the bottom left.

Paste Element 87 on to the canvas.  Re size it by 75% once.  Place it behind Element 18 on the left side.  Flip it horizontally.

Paste Element 88 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it behind the elements on the left side.

Paste Element 63 on to the canvas.  Re size it by 65% once.  Place it in front of the other elements on the left side.

Paste Element 19 on to the canvas.  Re size it by 50% once.  Place it on top of Element 8.

Paste Element 34 on to the canvas.  Re size it by 50% once.  Place it on the top right.

Paste Element 17 on to the canvas.  Re size it by 65% once.  Place it on top and in the center.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Treasured Memories

Treasured Memories
©Barbara Butler
February 2014

Supplies:
Kit-Treasured Moments by Amy Marie.  This kit can be found at www.amymarieskits.com


New Image 800X600 72DPI

C&P Element 68 on to the canvas.  Re size it by 85% once.  Click on the inside with the magic wand.  Expand the selection by 6, add a new layer and paste Pp23 into the selection.  Select none and move the paper layer below the frame.

C&P Element 52 on to the canvas.  Re size it twice, once by 50% then by 65%.  Place in the bottom left corner of the frame.

C&P Element 50 on to the canvas. Re size it three times, twice by 50% then once by 75%.  Place beside Element 52.

C&P Element 58 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the left and place it behind the elements on the left side.`

C&P Element 61 on to the canvas.  Re size it by 65% twice.  Place it on the right side.

C&P Element 63 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it behind Element 61 on the right side.

Back on the paper layer select all, float, defloat.  Add a new layer and paste Element 73 into the selection.  Select none.  Change the blend mode to Luminance.

C&P Element 107 on to the selection.  Re size it by 50% twice.  Place it on top of Element 61.

C&P Element 108 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the left (except the flowers).

C&P Element 109 on to the canvas.  Re size it by 65% twice.  Place it on the top right of the frame.

C&P Element 122 on to the canvas.  Flip it horizontally and place it on the right side.  Place it behind the paper layer.

C&P Element 132 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.


Thank you for taking a look at my tut.  I hope you have enjoyed it.

Pink Treasures

Pink Treasures
©Barbara Butler
February 2014

Supplies:
Kit-Pink Treasures by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI


01.  Paste Element 96 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

02.  Paste Element 4 on to the canvas.  Place it behind the cat.  Duplicate it, flip it horizontally and with the eraser erase some of the fence that covers the fence post.  Don't worry about any that doesnt match up very well on the top part we will be covering it up a little bit.

03.  Paste Element 9 on to the canvas.  Re size it by 65% once.  Place it behind the cat.

04.  Paste Element 47 on to the canvas.  Place it on the bottom and behind all the other elements.  Duplicate it and place it beside the other one.  Merge the two together and re size them by 75%.

05.  Paste Element 16 on to the canvas.  Re size it by 45% once.  Place it on top of the fence post.  Erase the bottom part so it looks like its part of the post.  Duplicate and place this one on the other post.

06.  Paste Element 19 on to the canvas.  Re size it by 45% once.  Flip it horizontally and place it towards the bottom right.

07.  Paste Element 20 on to the canvas.  Re size it by 45% once.  Flip it horizontally and place it on the bottom right.

08.  Paste Element 26 on to the canvas.  Place it on the bottom and behind the other elements.

09.  Paste Element 59 on to the canvas.  Place it top right of the fence.  Duplicate it and place this one on the left side.

10.  Paste Element 90 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

11.  Paste Element 108 on to the canvas.  Place it on the right side.

12.  Paste Element 141 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the cat.  Flip it horizontally.

13.  Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

14.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.


Thank you for taking a look at my tut.  I hope you have enjoyed it.

Days Past

Days Past
©Barbara Butler
February 2014

Supplies:
Kit-Days Past by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

01.  Paste Element 120 on to the canvas.  Re size it by 75% once.

02.  Paste Element 118 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.

03.  Paste Element 119 on to the canvas.  Re size it by 75% once.  Place it behind the element on the right.

04.  Paste Element 114 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

05.  Paste Element 96 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the left and place it on the top left.

06.  Back on the frame layer-Select all, float, defloat.  Expand the selection by 7.  Add a new layer and paste Pp5 into the selection, select none.  Move the paper layer below the frame.

07.  Paste Element 43 on to the canvas.  Re size it twice, once by 45% then by 65%.  Place in the bottom left corner of the paper layer (inside the frame).  Change the blend mode to Luminance.  Repeat this step for Element 35 but put this one on the right side of the paper.

08.  Paste Element 31 on to the canvas.  Re size it by 65% once.  Place it behind Element 114 on the left side.

09.  Paste Tube(s) of choice on to the canvas.  Re size it to a desired length.  Place to your liking.  If you put it inside the frame change the blend to luminance like you did for the elements.

10.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.


Thank you for taking a look at my tut.  I hope you have enjoyed it.

Paris

Paris
©Barbara Butler
February 2014

Supplies:
Kit-Paris Chic by Amy Marie.  This lovely kit can be found at www.amymarieskits.com


New Image 800X600 72DPI

01.  Paste Element 83 on to the canvas.  Rotate it 90 degrees, doesn't matter if it is to the left or to the right. 
Paste Element 82 on to the canvas.  Rotate it 90 degrees, and re size it by 85% once.  Leave it in the middle of the first frame.

02.  Paste Element 81 on to the canvas.  Place it on the right side.

03.  Paste Element 93 on to the canvas.  Re size it by 60% once.  Rotate it 15 degrees to the right and  place it in front of Element 81.

04.  Paste Element 92 on to the canvas.  Re size it by 60% once.  Flip it horizontally and place it on the bottom left.

05.  Paste Element 105 on to the canvas.  Place it on the bottom and behind the other elements.

06.  Paste Element 111 on to the canvas.  Re size it by 60% once.  Place it behind the Element 92.

07.  Paste Element 113 on to the canvas.  Place it in front of the other elements on the right.  You can actually place this to your liking.

08.  Paste Element 106 on to the canvas.  Re size it by 60% once.  Place it behind the fan on the right.

09.  Back on the first frame layer.  Click on the inside with the magic wand.  Expand the selection by 3.  Add a new layer and paste Pp15 into the selection.  Select none.

10.  Paste Tube(s) of choice on to the canvas.  Re size it if necessary.  Place to your liking.  Add copyright.

11.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Clover

Clover
©Barbara Butler
February 2014

Supplies:
Kit-Ireland 4 Ever by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

01.  Paste Element 51 on to the canvas.  Select all, add a new layer and paste Pp5 into the selection.  Select none and move it down below the frames.  Back on the frame layer click on the outside with the magic wand, go back to the paper layer and hit the delete key.

02.  Paste Element 53 on to the canvas.  Re size it twice, once by 45% then by 65%.  Place it on the bottom right.

03.  Paste Element 54 on to the canvas.  Re size it by 45% once.  Flip it horizontally and place behind and to the right of Element 53.

04.  Paste Element 63 on to the canvas.  Re size it by 45% once.  Place it behind and to the left of Element 53.

05.  Paste Element 41 on to the canvas.  Re size it by 45% once.  Place it on the top left of the fat frame.

06.  Paste Element 34 on to the canvas.  Re size it by 45% once.  Place it on the bottom left.

07.  Paste Element 33 on to the canvas.  Send it to the bottom in the layer palette.  Click on the inside of the frame and paste Pp5 as a new layer.  Invert the selection and hit the delete key.  Select none.  Move the paper below the frame.

08.  Paste Element 10 on to the canvas.  Re size it by 45% once.  Place it on the right and behind the other elements.

09.  Paste Element 23 on to the canvas.  Re size it by 45% and place it behind the coins.

10.  Paste Element 26 on to the canvas.  Re size it by 45% once.  Place it on the left side and behind the cookies.

11.  Pick about eight tubes from the same artist (preferably st patty ones).  Now on the frame layer click on the inside of each frame (one at a time), and paste five of the tubes into the selections.  Re size the tubes if necessary.  Invert the selection and hit the delete key.  Paste the other three tubes on to the canvas.  Place to your liking.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sweet Ballerina

Sweet Ballerina
©Barbara Butler
February 2014

Supplies:
Kit-Ballerina by Amy Marie.  This lovely kit can be found at www.amymarieskits.com
Mask-WSL148

New Image 800X600 72DPI.

01.  Select all, and paste Pp9 into the selection.  Select none.  Apply the mask and merge the mask group.  If you want you can re size this layer by about 85% once you applied the mask.

02.  Paste Element 4 on to the canvas.  Re size it by 50% twice.  Place it on the bottom left.

03.  Paste Element 12 on to the canvas.  Re size it by 65% once.  Place towards the left and put it under the paper layer in the layer palette.

04.  Paste Element 31 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.

05.  Paste Eement 42 on to the canvas.  Re size it by 50% once.  Place it on the top right.

06.  Paste Element 48 on to the canvas.  Re size it by 65% once.  Place it behind Element 4 on the bottom left.

07.  Paste Element 56 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

08.  Paste Element 82 on to the canvas.  Re size it by 65% twice.  Place it on the bottom.

09.  Paste Element 89 on to the canvas.  Re size it by 65% once.  Place it behind the word art on the bottom.  Add a drop shadow with the following settings:  V5, H4, OP91, Blur9, #1f071e.

10.  Paste Elements 94and 95 on to the canvas.  Place to your liking.

11.  Paste Tube(s) on to the canvas.  Re size it if needed.  Place to your liking.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Ireland

Ireland
©Barbara Butler
February 2014

Supplies:
Kit-Ireland by Amy Marie.  This kit can be found at www.amymarieskits.com



New Image 80X600 72DPI

01.  Paste Element 1on to the canvas.  Re size it by 75% once.

02.  Paste Element 66 on to the canvas.  Place behind Element 1.

03.  Paste Element 54 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

04.  Paste Element 53 on to the canvas.  Rotate it 15 degrees to the left and place it on the top right.

05.  Paste Element 55 on to the canvas.  Re sizeit by 75% twice.  Place it on the bottom of the fence.

06.  Paste Element 47 on to the canvas.  Place it behind the other elements but the fence.

07.  Paste Element 46 on to the canvas.  Re size it by 50% once.  Place it on the left side.

08.  Paste Element 24 on to the canvas.  Re size it by 50% once.  Place it behind the books on the right side.

09.  Paste Element 21 on to the canvas.  Re size it by 65% once.  Place it on the left side of the dog and behind it.

10.  Paste Element 18 on to the canvas.  Re size it twice, once by 50% then by 65%.

11.  Paste Tube(s) of choice on to the canvas.  Place to your liking.  Add copyright.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Cupids Delight

Cupid's Delight
©Barbara Butler
February 2014

Supplies:
Kit-Purple Cupid by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84

New Image 800X600 72DPI

01.  Paste Element 70 on to the canvas.  Re size it by 65% once.  Add a new layer select all and paste Pp18 into the selection.  Select none. Back on the frame layer click on the outside of the frame, back on the paper layer and hit the delete key.

02.  Back on the frame layer click on the outside of it with the magic wand.  Add a new layer and paste Pp18 into the selection.  Select none.  Apply the mask and merge the mask group.

03.  Paste Element 6 on to the canvas.  Re size it twice, once by 50% and again by 65%.  Place it on the bottom right of the frame.

04.  Paste Element 5 on to the canvas.  Re size it by 45% once.  Place it on the bottom left of the frame and rotate it 15 degrees to the left.

05.  Paste Element 10 on to the canvas.  Re size it by 45% once.  Place it in front of the bow and arrow.

06.  Paste Element 16 on to the canvas.  Re size it by 55% once.  Place it behind the elements on the right side.

07.  Paste Element 30 on to the canvas.  Re size it by 55% once.  Place it on the bottom left.

08.  Paste Element 46 on to the canvas.  Re size it by 50% twice.  Place it in front of the elements on the left side.

09.  Paste Element 47 on to the canvas.  Re size it twice once by 50% then by 75%.  Place it on the bottom left, behind the cupcake.

10.  Paste Element 50 on to the canvas.  Re size it twice, once by 50% then by 65%.  Place it on the right side of the elements on the left.

11.  Paste Element 62 on to the canvas.  Re size it by 65% once.  Place it on the top left.  Paste Element 61 on to the canvas.  Re size it by 65% twice and place in the middle of Element 62.

12.  Paste Tube(s) on to the canvas.  Re size it if necessary.  Add copyright.

13.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag if needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Pretty In Pink

Pretty In Pink
©Barbara Butler
February 2014

Supplies:
Kit-Nine by Amy Marie.  This kit can  be found at www.amymarieskits.com
Mask-Vix Mask 357


New Image 800X600 72 DPI

01.  Select all, paste Pp4 into the selection.  Apply the mask and merge the mask group.  Duplicate it three times and merge them together.

02.  Paste Element 8 on to the canvas.  Re size it by 50% once.  Place it on the bottom left.  Rotate it 15 degrees to the left.

03.  Paste Element 13 on to the canvas.  Re size it by 50% once.  Place to the right of the heart element.

04.  Paste Element 16 on to the canvas.  Re size it by 65% once.  Place it behind the other elements on the left side.  Rotate it 15 degees to the right.

05.  Paste Element 23 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side of the other elements on the left.  Make sure to bring it to the top.

06.  Back on the mask layer:  Select all, float, defloat.  Add a new layer and paste Element 43 into the selection.  Change the blend mode Multiply and the Opacity to 57.

07.  Paste Elements 50 and 51 on to the canvas.  Re size them both by 50% once.  Place them on the bottom right.

08.  Paste Element 53 on to the canvas.  Place it behind the elements on the left side.

09.  Paste Element 62 on to the canvas.  Re size it by 50% twice.  Place it in front of the elements on the right side.

10.  Okay at this point I decided to move the elements on the left side over to the right a little bit.  Except Element 53.

11.  Paste Tube(s) of choice on to the canvas.  Re size it if necessary.  Place to your liking.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag if needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Simply Red

Simply Red
©Barbara Butler
February 2014

Supplies:
Kit-Antoinne by Amy Marie.  This kit can be found at Here

New Image 800X600 72DPI

01.  Paste Element 36 on to the canvas.  Re size it by 70% once.  Click on the inside with the magic wand, expand by 6 and paste Pp15 as new layer.  Invert the selection and hit the delete key.  Select none.

02.  Paste Element 12 on to the canvas.  Re size it by 70% once.  Place it on the left side of the heart frame.

03.  Paste Element 26 on to the canvas.  Re size it by 70% once.  Rotate it 15 degrees to the left.  Place it below the heart frame and on the left side.

04.  Paste Element 34 on to the canvas.  Place it on the bottom (make sure its above the frame) and behind the bear.

05.  Paste Element 39 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the right and place it behind the frame.

06.  Paste Element 102 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it behind the bear on the left side.

07.  Back on the paper layer Select all, float, defloat.  Paste Tube of choice on to the canvas.  Duplicate it and move one of them above the frame layer.  Invert the selection and back on the one below the frame hit delete.  And on the duplicate take the eraser tool and delete any of it that is below the frame.  Add copyright.

08.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you enjoyed it.

Beautiful Spring Day

Beautiful Spring Day
©Barbara Butler
February 2014

Supplies:
Kit-8 of 2014 by Amy Marie.  This kit can be found at www.amymarieskits.com

Mask-WSL169


New Image 800X600 72 DPI

01.  Paste Element 44 on to the canvas.  Place on the bottom left. Dupliate it, mirror the duplicate and move it over to the right.  Merge the two together.  Duplicate it flip it horizontally and then vertically.  Move it down just a little bit.

02.  Paste Element 49 on to the canvas.  Re size it by 75% twice.  Place it on the right side of Element 44.  Duplicate it and mirror it.

03.  Paste Element 58 on to the canvas.  Re size it by 50% once.  Place it in front of the grass on the right side.

04.  Paste Element 59 on to the canvas.  Re size it by 50% once.  Place it in front of the grass on the left side.

05.  Paste Element 72 on to the canvas.  Re size it by 65% once.  Place it in the middle.

06.  Paste Element 79 on to the canvs.  Re size it by 65% once.  Place it behind the rabbit on the left side.

07.  Paste Element 96 on to the canvas.  Re size it by 65% three times.  Place it on top of the picnic basket on the right side.

08.  Paste Element 98 on to the canvas.  Re size it by 65% once.  Place it behind the picnic basket.

09.  Paste Element 99 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it to the left of the picnic basket.

10.  Paste Element 106 on to the canvaas.  Re size it twice, once by 50% then again by 65%.  Place it behind the tree stump.  Flip it horizontally.

11.  Paste Elements 82&86 on to the canvas.  Re size them both by 50% twice.  Place 82 on the right side of the bench and 82 on the left side.

12.  Add a new layer, select all, and paste Pp16 into the selection, select none.  Apply the mask and merge the mask group.  Duplicate it two times.  Merge these together. 

13.  Stay on the mask layer.  Select all, float, defloat.  Add a new layer and paste Tube of choice into the selection.  Duplicate it two time.  Merge the three together.  Change the opacity to 70.
Keep selected add another layer and paste a close up of the tube into the selection.  Select none.

14.  Paste Tube on to the canvas.  Re size it by 75% once.  Place it in front of the other elements.  Add copyright.

15.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as necessary.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tradition

Tradition
©Barbara Butler
February 2014

Supplies:
Kit-Tradition by Amy Maries Kits.  This kit can be found Here
Mask-WSL84
Plugin-Porcelain


New Image 650X650 72 DPI.

01.  Select all paste Pp23 into the selection.  Apply the mask and merge the mask group.

02.  Paste Element 8 on to the canvas.  Re size it by 75% once.  Place it on the right side.  Rotate it 15 degrees to the right.

03.  Paste Element 11 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom right.

04.  Paste Element 12 on to the canvas.  Re size it by 50% once.  Place it on the top right.

05.  Paste Element 25 on to the canvas.  Place it above the mask layer. 

06.  Paste Element 29 on to the canvas.  Place it on the left and behind Element 25.

07.  Paste Element 31 on to the canvas.  Flip it horizontally and place it on the left side and behind the other elements.

08.  Paste Element 39 on to the canvas.  Re size it by 50% once.  Place it on the top left of Element 25.  Rotate it 15 degrees to the right.

09.  Paste Element 44 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it on the bottom left.

10.  Back on the egg layer.  Click on the inside with the magic wand.  Paste tube of choice on to the canvas.  Re size it if necessary, invert the selection and hit the delete key, select none.  Apply the porcelain effect.  Add copyright.

11.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag if necessary.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Happy Days

Happy Days
©Barbara Butler
January 2014

Kit- 7 of 2014 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-Mask16 by Brutal Designs

New Image 800X600 72DPI

01.  Paste Pp3 on to the canvas.  Apply mask and merge mask group.  Paste Pp4 on to the canvas.  Apply the same mask and merge the group.  Change the blend mode to multiply.

02.  Paste Element 4 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

03.  Paste Element 3 on to the canvas.  Re size it by 65% twice.  Place it behind the shoes.  Flip it horizontally.

04.  Paste Element 14 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom right.

05.  Paste Element 13 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the left side.

06.  Paste Element 35 on to the canvas.  Place it behind the car on the right side.

07.  Paste Element 56 on to the canvas.  Place it behind the jukebox so it looks like it is coming out of it.

08.  Paste Tube(s) on to the canvas.  Re size it as needed and place to your liking.  Add copyright.

09.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you have enjoyed it.

Fairytale Dreams

Fairytale Dreams
©Barbara Butler
January 2014

Kit-Unicorns and Fairies by Amy Marie.  This amazing kit can be found at www.amymarieskits.com
Mask-Mask 6 from Brutal Designs.  It is apart of Mask set 1.

New Image 800X600 72DPI

01.  Select all, paste Pp25.  Apply the mask and merge mask group.

02.  Paste Element 33 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

03.  Paste Element 9 on to the canvas.  Re size it twice, once by 65% then by 75%.  Place above Element 33.

04.  Paste Element 26 on to the canvas.  Re size it by 65% once.  Place it behind the fairy.

05.  Paste Element 35 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

06.  Paste Element 38 on to the canvas.  Place it on the right side and behind the fairy and the chest.

07.  Paste Element 54 on to the canvas.  Flip it horizontally and place it on the left side behind Element 35.

08.  Paste Element 53 on to the canvas.  Move it over to the right a little bit. Place it behind the other elements. 

09.  Paste Element 56 on to the canvas.  Place it between Elements 35 and 54 on the left side.

10.  Paste Element 63 on to the canvas.  Place it on the left side.

11.  Paste Element 86 on to the canvas.  Place it behind the elements on the left side.

12.  Paste Element 102 on to the canvas.  Flip it horizontally and place it on the left side.

13.  Paste Tube(s) on the canvas.  Re size if necessary.  Place to your liking.  Add copyright.

14.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag if necessary.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Strawberry Dreams

Strawberry Dreams
©Barbara Butler
January 2014

Kit-Strawberry Dreams by Amy Marie.  This beautiful kit can be found at www.amymarieskits.com
Mask-Mask Set 1 by Brutal Designs

New Image 800X600 72DPI

01.  Paste Pp6 on to the canvas.  Apply the mask and merge the mask group.

02.  Paste Element 50 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

03.  Paste Element 56 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind Element 50.

04.  Paste Element 88 on to the canvas.  Place it on the bottom left.  Duplicate it, flip horizontally and place it on the right side.

05.  Paste Element 96 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind Element 50.

06.  Paste Element 100 on to the canvas.  Re size it by 65% once.  Place it on the right side.

07.  Paste Element 105 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

08.  Paste Element 114 on to the canvas.  Re size it twice.  Once by 50% then again by 65%.  Place it beside the picnic basket.

09.  Paste Element 120 on to the canvas. Re size it by 50% twice.  Place it on the left side and in front of Element 105.

10.  Paste Element 126 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.  Duplicate it, flip horizontally and place this one on the left side.

11.  Paste Tube(s) of choice on to the canvas.  Re size it as needed.  Place to your liking.  Add copyright.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you have enjoyed it.

Truly Elegant

Truly Elegant
©Barbara Butler
January 2014

Kit-Elegance by Amy Marie.  This beautiful kit can be found at www.amymarieskits.com
Template-Template 15 by Candylicious Designz.  candyliciousdesignz.blogspot.com.  I've had this for awhile so I'm not sure if the link is still valid.  If the blog has closed or moved feel free to use something else.

Open template and make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.

01.  Black Rectangle:  Select all, float, defloat.  Paste Pp26 into the selection.  Select none.

02.  Blue Circle:  Select all, float, defloat.  Paste Pp21 into the selection.  Select none.

03.  Purple Rectangle:  Select all, float, defloat.  Paste Pp16 into the selection.  Select none.

04.  White Square Frame:  Select all, float, defloat.  Paste Pp13 into the selection.  Select none.

05.  Purple Right and Left Circles:  Select all, float, defloat.  Paste Pp5 into the selection.   Select none.

06.  Paste Element 1 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

07.  Paste Element 4 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

08.  Paste Element 5 on to the canvas.  Re size it by 75% once.  Place it on the right side of the table.

09.  Paste Elements 7&8 on to the canvas.  Re size 8 by 75% once.  Merge them together.  The re size them by 75% and place them ontop of the table.

10.  Paste Element 10 on to the canvas.  Place it on the top right and below the rectangles.

11.  Paste Element 16 on to the canvas.  Re size it three times once by 65% then twice by 75%.  Place behind the glass on the left side.

12.  Paste Element 19 on to the canvas.  Re size it by 60% twice.  Place it in front of the glass.

13.  Paste Element 20 on to the canvas.  Re size it by 60% twice.  Place behind the other elements on the left side.

14.  Paste Element 21 on to the canvas.  Re size it by 60% once.  Place it on the top left corner of the rectangles.

15.  Paste Element 24 on to the canvas.  Place it on the right side.

16.  Back on the frame layer use your magic wand and click on the inside of the left side frame.  Expand the selection paste a CU of your tube of choice, re size it as needed, duplicate it, back on the original change the gaussian blur to about 5, back on the duplicate and change the blend mode to Luminance (L).  Back on the original and duplicate it and place it on the right side, do the same with the first duplicate.

17.  Paste main tube on to the canvas.  Re size it as needed and place it to your liking.  You might have to move some of the elements around.  Add copyright.

18.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

True Love

True Love
©Barbara Butler
January 2014

Kit-Six 2014 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84


New Image 800X600 72DPI

01.  Paste Element 6 on to the canvas.  Re size it by 65% once. 

02.  Paste Element 4 on to the canvas.  Re size it by 65% once.  Flip it horizontally and put it on the bottom left.

03.  Paste Pp19 on to the canvas.  Apply the mask and merge the mask group.  Place behind the other elements.

04.  Paste Element 18 on to the canvas.  Flip it horizontally and place it in front of Element 6.

05.  Paste Element 21 on to the canvas.  Re size it by 75% twice.  Place it behind the cat on the left side.  Flip it horizontally.

06.  Paste Element 28 on to the canvas.  Re size it by 65% twice.  Place it above the left door.  Duplicate it twice and merge the three together.  Duplicate it once and place this one over the right door.

07.  Paste Element 33 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and below Element 21.

08.  Paste Element 49 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the right side.

09.  Paste Element 86 on to the canvas.  Re size it by 65% once.  Place it on the bottom and in front of the other elements.

10.  Paste Element 88 on to the canvas.  Re size it by 65% once.  Place it on the left side and below the other elements.

11.  Paste Element 70 on to the canvas.  Duplicate it twice and merge the three togther.

12.  Paste Tube(s) of choice on to the canvas.  Re size it as needed.  Place to your liking.

13.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Strawberry Wine

Strawberry Wine
©Barbara Butler
January 2014

Kit-Strawberry Love by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

01.  Paste Element 59 on to the canvas.  Re size it by 70% once.  Place it on the left side.  Click on the inside of the frame and expand the selection by 6.  Add a new layer and paste Pp20 into the selection.

02.  Paste Element 8 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top left corner of the frame.  Rotate it 15 degrees to the right.

03.  Paste Element 10 on to the canvas.  Re size it by 50% once.  Place it in the bottom left corner of the frame.

04.  Paste Element 19 on to the canvas.  Re size it by 65% twice.  Place in the bottom right corner of the frame.

05.  Paste Element 38 on to the canvas.  Re size it by 65% twice.  Place it on the right side of the frame and below the puppy.

06.  Paste Element 47 on to the canvas.  Re size it by 65% twice.  Place it on the left side of the elements on the right side of the frame.

07.  Paste Tube(s) of choice on to the canvas.  Re size it if necessary.  Place to your liking.  Add copyright.

08.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you've enjoyed it.

Attractively Wicked

Attractively Wicked
©Barbara Butler
January 2014

Kit-Wicked Attraction by Amy Marie.  This kit can be found at www.amymarieskits.com.
Tube-Barbara by Very Many.  This tube can be found at www.picsfordesign.com.  Please do not use with out having the proper license to use it and buying it.
Mask-WSL84

New Image 800X600 72DPI

01.  Paste tube on to the canvas.  Re size it if necessary.

02.  Paste Element 125 on to the canvas.  Place below the tube.  Duplicate it twice.  Move one to the right and the other to the left.

03.  Paste Element 54 on to the canvas.  Place it on the left side.  Duplicate it and flip the duplicate horizontally and move it over on the right side.  Merge the two together and re size it by 85% once.  Place it behind the tube.  Repeat this step for the Element 55.  Except omit the re sizing.

04.  Paste Element 36 on to the canvas.  Place behind all the other elements.

05.  Paste Element 9 on to the canvas.  Re size it by 75% once.  Place it on the left side of Element 36.

06.  Paste Element 6 on to the canvas.  Rotate it 15 degrees to the right.  Place it on the right side.

07.  Paste Pp19 on to the canvas.  Apply the mask and merge the mask group.
Select all, float, defloat.  Paste Pp15 as a new layer, invert the selection and hit the delete key.  Change the blend mode to Luminance(L).

08.  Paste Element 31on to the canvas.  Re size it by 65% twice.  Place it on the left side of the tube.

09.  Paste Element 35 on to the canvas.  Re size it by 65% three times.  Place beside Element 31.

10.  Paste Element 84 on to the canvas.  Re size it by 65% twice.  Place it on the right side of the tube.

11.  Paste Element 100 on to the canvas.  Place it behind the other elements.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Make sure you add the copyright for the tube.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you have enjoyed it.