Liliana

I used the lovely Tube Liliana for these tags.  You can fine her here.  I used the kit Fairy Spring by Mariel-Designs.  You can fine this kit Here.

 

Sera

~§~Norella CT~§~  

Sera
I used the lovely Tube Sera for these tags.  You can fine her here.

Prismay

Two new tags using the lovely Prismay tube by Norella and the lovely matching kit by R&K Elite Designs.  This tube can be found Here and the kit can be found Here.

Cherry Blossom

Cherry Blossom
©Barbara Butler
February 2015

Supplies:
Kit:  Cherry Blossom by Amy Marie.  This kit can be found at www.amymarieskits.com
Tube:  Cherry Blossom By Norella.  Can be found at Here
Template:  Keep Calm by Dee.  Just click on her link to go to her site.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.  Re size the canvas so the elements will fit later on (you can re size it to your liking but this might change some of the settings later on).

Creme Rectangle:  Select all, float, deflate.  Paste Pp19 into the selection, select none.

Creme Octagon:  Select all, float, deflate.  Paste Pp18 into the selection, select none.

Pink Boxes:  Select all, float, deflate.  Paste Pp14 into the selection, select none.  Repeat for Large Grey Circle.

Orange Rectangle:  Select all, float, deflate.  Paste Pp22 into the selection, select none.

Small Grey Circle:  Select all, float, deflate.  Paste Pp28 into the selection, select none.  Repeat this for Orange Octagon.

Pink Rectangle:  Select all, float, deflate.  Paste Pp21 into the selection, select none.  Repeat for the Creme Circle and Grey Octagon.

Tiara:  Select all, float, deflate.  Paste Pp21 into the selection, move to your liking.  Repeat for the word art layers.  Add a drop shadow to the Keep Calm and star Layers.  For the Tiara (word art) White layer select all, float, deflate and paste Pp28 into the selection, select none.

C/P Element 2 on to the canvas.  Place towards the top and add a gradient glow of choice.

C/P Element 8 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 18 on to the canvas.  Re size it by 75% twice.  Place it on top of the T in Tiara.  Now with the magic wand erase part of the tail feathers between the feet.

C/P Element 24 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

C/P Element 29 on to the canvas.  Place it on the left side and in front of the birdbath.

C/P Element 59 on to the canvas.  Re size it by 75% twice.  Place it on the top left of the octagon layers.

C/P Element 97 on to the canvas.  Place it on the bottom right and behind the word art layer.

C/P Element 96 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of everything else.

C/P Element 56 on to the canvas.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Zanna

Two new tags using the amazing Zanna tube by Norella.  She goes great with all the wonderful fantasy kits out there, I paired her with a couple of kits by Amy Marie.  You can fine this lovely poser Here.

Lyra

Do you love dragons and princesses then this poser is for you.  She goes well with any fantasy style kit out there.  I paired with Dragon Lady by Amy Marie.

 

Poser can be found Here

Kit can be found Here

Winter Fairyland

Winter Fairyland
©Barbara Butler
October 2014

Supplies:
Kit-Winter Fairyland by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  463 by Millies PSP Madness.  You can fine the link to her site on the side.

Open template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Delete the copyright layer.  Re size the canvas to 800X600 (do not have the lock aspect ratio clicked), repeat this but this time have the lock aspect ratio clicked and change the width to 900 and the height will change itself.

Layer 4:  Select all, float, defloat.  Paste Pp7 into the selection, select none.

Layers 1&2:  Select all, float, defloat.  Paste Pp9 into the selection, select none.

Layers 7&8:  Select all, float, defloat.  Paste Pp15 as a new layer, invert the selection and hit the delete key, select  none.  Close or delete the original layers.

Layers 5&6:  Select all, float, defloat.  Paste Pp17 into the selection, select none.  

Layers 9&10:  Select all, float, defloat.  Paste Pp7 into the selection, select none.  On Layer 10 after you select none flip this one horizontally.

C/P Element 3 on to the canvas.  Re size it by 75% once.  Place it on the bottom.  Add a drop shadow with the following settings:  V&H 2, Opacity:  50, Blur 7, Color #2f1b63

C/P Element 13 on to the canvas.  Re size it by 75% twice.  Place it behind Element 3.  Add the same drop shadow as before.  Repeat the same drop shadow.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Place it on the right side and in front of the other elements.

C/P Element 17 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.  Add the same drop shadow as before but change the opacity to 75.

C/P Element 26 on to canvas.  Re size it by 75% once.  Place it on the bottom right and in front of the other elements.

C/P Element 27 on to the canvas.  Place it on the right side and in front of the other elements.

C/P Element 37 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 46 on to the canvas.  Re size it by 75% once.  Place it on the bottom and in front of the fence.  Add the same drop shadow as before but this time change the color to #1e1e1e.  Repeat the drop shadow and change the V&H to a -2.

C/P Element 71 on to the canvas.  Re size it by 65% once.  Place it on the top left.  Add a drop shadow with the following settings:  Vertical 4, Horizontal 5, Opacity 75, Blur 7, Color #1e1e1e

C/P Element 75 on to the canvas.  Place it on the right side and behind the other elements.  Add the same drop shadow as the last step.

C/P Element 134 on to the canvas.  Re size it by 75% once.  Place it on the bottom left. 

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Fairyland Fire

Fairyland Fire
©Barbara Butler
September 2014

Supplies:
Kit-Fairyland Fire by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84
Filters/Plugins:  Eyecandy 4000 Gradient Glow (for name).
Fonts:  Addams, Arial Unicode (for copyright)
Tube:  Autumn Fairy.  Exclusive at Pics for Design.  www.picsfordesign.com

New Image 800X600 72DPI

Select all, paste Pp25 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 4 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand, expand the selection by 5.  Paste Pp10 as a new layer, invert the selection and hit the delete key, select none.  Move the paper down below the frame.

C/P Element 7 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C/P Element 21 on to the canvas.  Re size it by 75% once.  Rotate it 90 degrees to the right and place it on the bottom and behind Element 7.

C/P Element 24 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 20 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 28 on to the canvas.  Place it on the right side and behind the frame and paper layers.

C/P Element 47 on to the canvas.  Re size it twice once by 45% then again by 75%.  Place it on the top left and rotate it 15 degrees to the right.

C/P Elements 48&49 on to the canvas.  Place them on the bottom and behind the other elements.  Place one just to the right of the other.

C/P Element on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 81 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

On the paper layer select all, float, defloat.  Paste Element 111 on to the canvas, invert the selection and hit the delete key, select none.

C/P Element 115 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind the other elements.  Duplicate it once and move the duplicate it over to the left.  Duplicate this one and move this one to the left.

C/P Element 135 on to the canvas.  Place it behind Element 111 on the paper layer.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Goth In Fairyland 2014

Goth In Fairyland
©Barbara Butler
August 2014

Supplies:
Kit-Goth In Fairyland by Amy Marie.  This kit can be found at www.amymarieskits.com


New Image 800X600 72DPI.

C/P Element 4 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 9 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 12 on to the canvas.  Place it on the right side and behind Element 9.

C/P Element 13 on to the canvas.  Place it on the left side and behind Element 4.

C/P Element 20 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 25 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.  Duplicate it, flip it horizontally and move it to the right side.

C/P Element 27 on to the canvas.  Place it on the left side and in front of the other elements.  Duplicate it and flip the duplicate horizontally.

C/P Element 46 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 49 on to the canvas.  Re size it by 45% once.  Place it on the bottom and in front of the other elements.

C/P Element 65 on to the canvas.  Re size it by 75% twice.  Place it on the left side and in front of the other elements.

C/P Element 70 on to the canvas.  Re size it by 75% twice.  Place it on the right side of the barrel.

C/P Element 112 on to the canvas.  Re size it by 75% once.  Place it to the right of Element 70 and below it in the layer palette.

C/P Element 116 on to the canvas. Re size it by 65% twice.  Place it on the left side and behind Element 65.

C/P Element 104 on to the canvas.  Place it behind the other elements.

C/P Element 106 on to the canvas.  Place it behind the other elements.  Take the wand and click on the inside, expand the selection, add a new layer and paste Pp11 into the selection, select none.  Place the paper below the heart.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Dragon Lady

Dragon Lady
©Barbara Butler
July 2014

Supplies:
Kit-Dragon Lady by Amy Marie.  This kit can be found at www.amymarieskits.com

C/P Element 46 on to the canvas.  Re size it by 65% once.  With the magic wand click on the inside of each slat, add a new layer and paste Pp1 into the selection, select none.  Move the paper layer down below the frame.

C/P Element 17 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 28 on to the canvas.  Place it on the right side and behind everything else.

C/P Element 39 on to the canvas.  Re size it by 75% once.  Place it on the left side and in front of the other elements.

C/P Element 45 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind everything else.

C/P Element 59 on to the canvas.  Re size it by 75% twice.  Place it on the left side and in front of Element 46.

C/P Element 96 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and flip it horizontally.

C/P Element 76 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 69 on to the canvas.  Re size it by 65% three times.  Place it on the bottom left and in front of the other elements.

C/P Element 63 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind everything else except for Element 28.

Back on the paper layer; Select all, float, defloat.  Paste a tube of choice on to the canvas.  Re size as needed, invert the selection and hit the delete key, select none.  I used an exclusive tube from over at Pics For Design but you can use any tube you would like.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Fairyland In Fall

Fairyland In Fall
©Barbara Butler
July 2014

Supplies:
Kit-Fairyland In Fall
 by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-639 by Millies PSP Madness.  www.milliespspmadness.blogspot.com.

Open up template and check to make sure it is at 72DPI.  Duplicate it and close the original one.  Delete the copyright layer.  Re size the canvas to a little bit bigger size so the elements will fit.

10&11:  Select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

8&9:  Select all, float, defloat.  Paste Pp10 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

7:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

6:  Select all, float, defloat.  Paste Pp5 as a new layer, invert the selection and hit the delete key.  Close or delete the original layer.

4&5:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

3:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

1&2:  Select all, float, defloat.  Paste Pp28 into the selection, select none.

C/P Element 4 on to the canvas.  Re size it by 65% twice.  See my tag for placement.

C/P Element 11 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C/P Element 10 on to the canvas.  Re size it by 65% once.  Place it on the top right.

C/P Element 16 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 47 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the left side.

C/P Element 59 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the right side.

C/P Element 78 on to the canvas.  Re size it by 85% once.  Place it on the bottom.

C/P Element 79 on to the canvas.  Re size it twice once by 65% then by 75%.  Place it on the bottom right and in front of the other elements.

C/P Element 88 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind Element 79.

C/P Element 106 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 130 on to the canvas.  Re size it by 65% once.  Place it behind Element 106.

C/P Element 133 on to the canvas.  Re size it by 65% three times.  Place it in front of the elements on the left side.

C/P Element 137 on to the canvas.  Place it on top and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Where Blue Birds Fly

Where Blue Birds Fly
©Barbara Butler
July 2014

Supplies:
Kit-Rainbow Fantasy by Amy Marie.  This kit can be found at www.amymarieskits.com
Template/Mask:  Template 637 by Millies PSP Madness.  www.milliespspmadness.blogspot.com.  This template doesnt say raster or layer for each of the layers so I'm writing them as they appear in the layer palette for example Layer 1 will be just 1.

Open up template and check to make sure it is at 72DPI.  Duplicate it and close the original one.  Delete the copyright layer.

5:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

4:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

6&7:  Select all, float, defloat.  Paste Pp43 into the selection, select none.

2&3:  Select all, float, defloat.  Paste Pp42 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

1:  Select all, float, defloat.  Paste Pp37 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 14 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 20 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 21 on to the canvas.  Re size it by 50% twice.  Place it on the bottom left.

C/P Element 50 on to the canvas.  Re size it by 50% once.  Place it on the top left.  Rotate it 15 degrees to the left.

C/P Element 96 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it behind the elements on the bottom left side.

C/P Element 102 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 156 on to the canvas.  Re size it by 75% once.  Place it behind Element 102 on the right side.

C/P Element 165 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the right side.

C/P Element 170 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 179 on to the canvas.  Place it on the bottom and behind all the other elements.

C/P Element 176 on to the canvas.  Re size it by 65% twice.  Place it  on the left side and behind Element 14.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Over The Rainbow

Over The Rainbow
©Barbara Butler
July 2014

Supplies:
Kit-Rainbow Fantasy by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C/P Element 100 on to the canvas.  Move down towards the bottom a little bit.

C/P Element 25 on to the canvas.  Re size it by 65% once.  Place it behind Element 100.

C/P Element 38 on to the canvas.  Place it behind the other elements.

C/P Element 42 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 45 on to the canvas.  Place it behind Element 100.

C/P Element 51 on to the canvas. Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 62 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind Element 42.

C/P Element 71 on to the canvas.  Re size it by 50% once.  Place it in front of Element 38.  Duplicate it and re size the duplicate by 75%, move this one down a little bit.

C/P Element 72 on to the canvas.  Re size it by 75% twice.  Place it behind the two elements on the left.

C/P Element 120 on to the canvas.  Re size it by 65% three times and place it behind all the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Garden Fantasy

Garden Fantasy
©Barbara Butler
February 2014

Supplies:
Kit-Fantasy Garden by Amy Marie.  You can fine this beautiful kit at www.amymarieskits.com
Mask-WSL169

New Image 800X600 72DPI

01.  Select all and paste Pp4 into the selection.  Apply the mask and merge the mask group.  Duplicate it four times and merge them all together (this is so the background of the paper will show up better).  Re size it by 75%.

02.  Paste Element 9 on to the canvas.  Re size it by 75% once.  Place it on the left side.

03.  Paste Element 4 on to the canvas.  Re size it by 60% once, then again by 65%.  Place it on the bottom right.

04.  Paste Element 14 on to the canvas.  Re size it by 60% once.  Place it on the bottom left.

05.  Paste Element 37 on to the canvas.  Re size it by 60% once.  Flip it horizontally and place it on the top right.

06.  Paste Element 45 on to the canvas.  Re size it twice, once by 60% then by 65%.  Place it on the bottom right.

07.  Paste Element 47 on to the canvas.  Re size it by 65% twice.  Place it behind the elements on the bottom left.

08.  Paste Element 60 on to the canvas.  Re size it by 65% twice.  Place it towards the bottom right.

09.  Paste Element 107 on to the canvas.  Re size it by 50% once.  Place it on the top left.

10.  Paste Tube(s) on to the canvas.  Re size if needed.  Place to your liking.

11.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag to a desired size.  Save as a png and you are done.



Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tradition

Tradition
©Barbara Butler
February 2014

Supplies:
Kit-Tradition by Amy Maries Kits.  This kit can be found Here
Mask-WSL84
Plugin-Porcelain


New Image 650X650 72 DPI.

01.  Select all paste Pp23 into the selection.  Apply the mask and merge the mask group.

02.  Paste Element 8 on to the canvas.  Re size it by 75% once.  Place it on the right side.  Rotate it 15 degrees to the right.

03.  Paste Element 11 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom right.

04.  Paste Element 12 on to the canvas.  Re size it by 50% once.  Place it on the top right.

05.  Paste Element 25 on to the canvas.  Place it above the mask layer. 

06.  Paste Element 29 on to the canvas.  Place it on the left and behind Element 25.

07.  Paste Element 31 on to the canvas.  Flip it horizontally and place it on the left side and behind the other elements.

08.  Paste Element 39 on to the canvas.  Re size it by 50% once.  Place it on the top left of Element 25.  Rotate it 15 degrees to the right.

09.  Paste Element 44 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it on the bottom left.

10.  Back on the egg layer.  Click on the inside with the magic wand.  Paste tube of choice on to the canvas.  Re size it if necessary, invert the selection and hit the delete key, select none.  Apply the porcelain effect.  Add copyright.

11.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag if necessary.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Fairytale Dreams

Fairytale Dreams
©Barbara Butler
January 2014

Kit-Unicorns and Fairies by Amy Marie.  This amazing kit can be found at www.amymarieskits.com
Mask-Mask 6 from Brutal Designs.  It is apart of Mask set 1.

New Image 800X600 72DPI

01.  Select all, paste Pp25.  Apply the mask and merge mask group.

02.  Paste Element 33 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

03.  Paste Element 9 on to the canvas.  Re size it twice, once by 65% then by 75%.  Place above Element 33.

04.  Paste Element 26 on to the canvas.  Re size it by 65% once.  Place it behind the fairy.

05.  Paste Element 35 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

06.  Paste Element 38 on to the canvas.  Place it on the right side and behind the fairy and the chest.

07.  Paste Element 54 on to the canvas.  Flip it horizontally and place it on the left side behind Element 35.

08.  Paste Element 53 on to the canvas.  Move it over to the right a little bit. Place it behind the other elements. 

09.  Paste Element 56 on to the canvas.  Place it between Elements 35 and 54 on the left side.

10.  Paste Element 63 on to the canvas.  Place it on the left side.

11.  Paste Element 86 on to the canvas.  Place it behind the elements on the left side.

12.  Paste Element 102 on to the canvas.  Flip it horizontally and place it on the left side.

13.  Paste Tube(s) on the canvas.  Re size if necessary.  Place to your liking.  Add copyright.

14.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag if necessary.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.