Summer Breeze

Summer Breeze

©Barbara Butler

May 2015

Supplies:

Kit:  Summer Breeze by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD, Tiny Turtle

New Image 800X600 72DPI

C/P Element 51 on to the canvas.  Re size it by 75% twice.  Click on the inside with the magic wand and expand the selection by 15.  Paste Pp15 as a new layer, invert the selection and hit the delete key, select none.  Move the paper below the frame.

C/P Element 70 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 73 on to the canvas.  Re size it by 65% three times.  Place it on the top right.

C/P Element 84 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind Element 70.

C/P Element 106 oto the canvas.  Re size it by 65% twice.  Place it on the bottom right.  Rotate it 15 degrees to the left.

C/P Element 127 on to the canvas.  Re size it by 65% once.  Place it on the bottom and behind the other elements.

C/P Element 118 on to the canvas.  Re size it by 75% once.  Place it behind everything else including the frame and paper layers.  Take the deform tool and using the top and bottom nodes expand it out just a little bit.

C/P Element 79 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Dolly

Dolly

©Barbara Butler

May 2015

Supplies:

Kit:  Hannah by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD 

Tube:  Dolly by Alehandra Vanhek This tube can be found at http://tinyturtledesigns.com/store/

Template:  625 by Millies PSP Madness

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas so the elements will fit later.

Layer 1:  Select all, float, deflate.  Paste Pp015 into the selection, select none.

Layer 2:  Select all, float, deflate.  Paste Pp016 into the selection, select none.  Flip it vertically.

Layers 3&4:  Select all,  float, deflate.  Hit the delete key a couple of times and paste Pp013 into the selection, select none.

Layer 5:  Select all, float, deflate.  Paste Pp020 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layers 6&7:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp019 into the selection, select none.

Layer 8:  Select all, float, deflate.  Paste Pp012 as a new layer, invert the selection and hit the delete key, select none.  Do not close or delete the original layer.

Layer 9:  Select all, float, deflate.  Paste Pp011 as a new layer, invert the selection and hit the delete key, select none.  Do not close or delete the original layer.

Merge the word art layers together.  Add a gradient glow and move towards the bottom right.

C/P Element 1 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

C/P Element 4 on to the canvas.  Re size it by 75% once.  Place it on the top right.

C/P Element 9 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind the word art layer.

C/P Element 19 on to the canvas.  Place it on the bottom and behind the word art.  Rotate it 15 degrees to the right.

C/P Element 24 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the other elements.  Duplicate it, flip this one horizontally and move it towards the right just a little bit.

C/P Element 30 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 53 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind the other elements.

C/P Element 82 on to the canvas.  Re size it by 75% once.  Flipi horizontally and place it on the right side and behind the rope only.  Duplicate it and move this one to the left just a little bit.

C/P Element 101 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 100 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the boat.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Patty

Patty
©Barbara Butler
May 2015

Supplies:
Kit:  Patty by Amy Marie.  This kit can be found at the following stores Amy Maries Kits, PFD, Tiny TurtleTemplate:  639 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size so the elements will fit.

Layers 1&2:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp5 into the selection, select none.

Layer 3:  Select all, float, deflate.  Hit the delete a couple of times and paste Pp6 into the selection, select none.

Layers 4&5:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp3 into the selection, select none.

Layer 6:  Select all, float, deflate.  Paste Pp2 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 7:  Select all, float, deflate.  Paste Pp16 into the selection, select none.

Layers 8&9:  Select all, float, deflate.  Paste Pp12 into the selection, select none.

Layers 10&11:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp15 into the selection, select none.

C/P Element 2 on to the canvas.  Re size it by 65% once.  Place it on the top left.

C/P Element 6 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the right side.

C/P Element 9 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 18 on to the canvas.  Re size it by 75% once.  Place it on the bottom left and behind Element 9.

C/P Element 45 on to the canvas.  Re size it by 75% three times.  Place it on the bottom right.

C/P Element 49 on to the canvas.  Re size it by 65% twice.  Place it on the right side and to the left of the bag.

C/P Element 55 on to the canvas.  Place it on the bottom and behind the other elements.  Add a gradient glow of choice.

C/P Element 93 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the right side and in front of the bag.

C/P Element 112 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side and behind Element 9.

C/P Element 114 on to the canvas.  Re size it by 65% twice.  Rotate it 30 degrees to the right and place it behind the elements on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Summer Girl

Summer Girl
©Barbara Butler
May 2015

Supplies:
Kit:  Summer by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Tube:  Summer Girl This tube can be found at http://tinyturtledesigns.com/store/
Mask:  WSL194

New Image 1000X800 72DPI

Select all, paste Pp1 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 46 on to the canvas.  Place it on the bottom and center it.  Duplicate it a couple of times, move one to the right side and the other to the left side.

C/P Element 19 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 52 on to the canvas.  Rotate it 15 degrees to the right and place it on the right side and behind Element 19.

C/P Element 50 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it in front of the other elements on the right side.

C/P Element 55 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C/P Element 16 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the light house.

C/P Element 13 on to the canvas.  Re size it by 65% once.  Place it on the right side and in front of the other elements.

C/P Element 11 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 3 on to the canvas.  Re size it by 65% once.  Place it on the left side and in front of the light house.

C/P Element 95 on to the canvas.  Click on the inside with the magic wand expand th selection by 26, add a new layer and paste Pp2 into the selection, select none.  Move the paper below the frame.  Change the blend mode on the paper to Luminance(L).

C/P Element 18 on to the canvas.  Place it on the right side and in front of Element 95.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Shannon

Shannon
©Barbara Butler
May 2015

Supplies:
Kit:  Down Home Girl by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com,
PFD http://picsfordesign.com/en/catalogue/type/k/auth/AmyMarie/sort/date/per_page/40
Tube:  Shannon by Lysisange This tube can be found at http://tinyturtledesigns.com/store/
Template:  637 by Millies PSP Madness.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size so the elements will fit properly.

Layer 4:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp4 into the selection, select none.

Layers 6&7:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp5 into the selection, select none.

Layers 2&3:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp8 into the selection, select none.

Layer 1:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp7 into the selection, select none.

Layer 5:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp011 into the selection, select none.

C/P Element 7 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 26 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 30 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 32 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of Element 7.

C/P Element 38 on to the canvas.  Re size it by 65 once.  Place it on the right side and behind the other elements.

C/P Element 44 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 70 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left of the square.  Add a drop shadow of choice.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Bailey

I used the lovely Tube Bailey for these tags.  You can fine her here.

Alexis

Alexis
©Barbara Butler
May 2015

Supplies:
Kit:  Alexis by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com,
PFD 
Tiny Turtle

Template:  Template 66 by Rachel.  This template can be found at Scraps of Enchantment.  This is an old template that I have had for years now so I don't have a link for it or know if the blog it was on is still active.  If anyone knows the link or knows if it is still active please let me know.

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size so the elements will fit.

Dark Grey Rectangle:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp3 into the selection, select none.

Black Square:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp8 into the selection, select none.

Light Grey Rectangle:  Select all, float, deflate.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 3 on to the canvas.  Re size it twice, once by 75% then by 65%.  Place it on the right side.

C/P Element 10 on to the canvas.  Re size it by 65% three times.  Place it on the right side and in front of Element 3.

C/P Element 31 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C/P Element 56 on to the canvas.  Re size it by 65% twice.  Place it to the right of Element 31.

C/P Element 76 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 94 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the other elements.

C/P Element 106 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind the other elements.

C/P Element 71 on to the canvas.  Re size it by 75% once.  Place it on the top of the square layer.  Add a gradient glow with settings of choice I used a light blue from my tag.

C/P Element 24 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the left side of the square layer.  Duplicate it and merge the two together.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Linda

Linda
©Barbara Butler
May 2015

Supplies:
Kit:  Cuddles by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Tube:  Linda This tube can be found Here


Note:  Some of the elements in the kit I am using says the name of the element so that is what I am using for the instructions.

C/P Elements 1&3 on to the canvas.  Place it on the left side.  Rotate it 15 degrees to the left.  Place Element 1 in front of Element 3 and make sure Element 3 shows a little behind Element 1.

C/P Screen on to the canvas.  Re size it by 75% once.  Place it behind the other elements.

C/P Tea on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Candle 1 on to the canvas.  Re size it by 75%once.  Place it on the right side and behind the tea.

C/P Element 5 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and in front of the other elements.

C/P Kitten on to the canvas.  Re size it by 75% twice.  Place it on the right side of Element 5.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Cece

I used the lovely Tube Cece for these tags.  You can fine her here

Mermaid Fun

Mermaid Fun
©Barbara Butler
May 2015

Supplies:
Kit:  Mermaid Fun by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template:  660 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas so the elements will fit.

Layer 3:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp10 into the selection, select none.

Layer 1:  Select all, float,  deflate.  Hit the delete key a couple of times and paste Pp15 into the selection,  select none.

Layer 4:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp20 into the selection, select none.  Repeat this for Layer 5 but with this one flip the paper horizontally (make sure there is no marching ants around the paper before you flip it because if you don't it will not look right).

Delete layers 6&7.

C/P Element 5 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 7 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind Element 5.

C/P Element 10 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 24 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the right and place it on the top left.

C/P Element 23 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind the bottle.

C/P Element 30 on to the canvas.  Re size it by 85% once.  Place it behind the other elements (but leave it in the middle of the canvas).

C/P Element 47 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements.

C/P Element 48 on to the canvas.  Re size it by 75% once.  Place it on the left side of the arch.  Duplicate it, flip the duplicate horizontally and place this one on the right side of the arch.

C/P Element 72 on to the canvas.  Re size it by 65% twice.  Place it on the left of the arch.

C/P Element 127 on to the canvas.  Re size it by 75% once.  Leave it in the middle of the canvas and in front of the other elements.

C/P Element 68 on to the canvas.  Re size it by 75% three times.  Place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Ariel

Ariel
©Barbara Butler
May 2015

 

Supplies:
Kit:  Ariel by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template:  250 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright, the trees, and word art layers.  Re size the canvas to a bigger size for the elements later on.

Layers 4, 5, 6:  Select all, float, deflate.  Add a new layer and paste Pp3 into the selection, select none.  Add a drop shadow to layer 6.  Close or delete the original layers.

Layers 2&3:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp13 into the selection, select none.

Layer 1:  Select all, float, deflate.  Paste Pp19 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 3 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 19 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 27 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the rock.

C/P Element 51 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 59 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 79 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 96 on to the canvas.  Re size it by 50% once.  Place it on the bottom left and in front of the other elements.

C/P Element 103 on to the canvas.  Re size it by 50% once.  Place it on the top right and behind the flower.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tiny TUrtle Design Store Crazy Friday AD

Crazy Friday Sales at Tiny Turtle Designs
You can find Disco Science Tubes for $1.00.  There are many designers and artists on sale as well.  You can fine them at
Store:  http://tinyturtledesigns.com/store/
Disco Science:  http://tinyturtledesigns.com/store/index.php?main_page=index&cPath=126_238

Vanessa

I used the lovely Tube Vanessa for these tags.  You can fine her here 

 

Chloe

Chloe
©Barbara Butler
May 2015

Supplies:
Kit:  Chloe by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL 84

New Image 800X600 72DPI

Select all, paste Pp19 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 2 on to the canvas.  Rotate it 15 degrees to the right and place it on the right side.

C/P Element 11 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of Element 2.

C/P Element 26 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Element 31 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 39 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind the other elements.

C/P Element 76 on to the canvas.  Re size it by 65% once.  Place it on the right side and  behind the sign.

C/P Element 99 on to the canvas.  Place it behind the other elements.  Add a drop shadow of choice.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Emmylou

I used the lovely Tube Emmylou for these tags.  You can fine her here.

 

Zoey

Zoey
©Barbara Butler
May 2015

Supplies:
Kit:  Zoey by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template:  670 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a little bit bigger size for the elements later on.

Layer 1:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp16 into the selection, select none.

Layer 2:  Select all, float, deflate.  Paste Pp10 into the selection, select none.

Layers 3&5:  Select all, float, deflate.  Paste Pp5 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 4:  Select all, float, deflate.  Paste Pp11 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 7:  Select all, float, deflate.  Paste Pp8 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layers 9, 10, and 11:  Select all, float, deflate.  Paste Pp9 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.  On the word art layers (9 and 11) add a gradient glow of choice I used a dark blue from the tag.

C/P Element 6 on to the canvas.  Place it on the bottom left.

C/P Element 10 on to the canvas.  Place it on the top left.

C/P Element 19 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right and place it on the top right.

C/P Element 27 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the left and place it on the top left.  Add a drop shadow using the same dark blue from the gradient glow.

C/P Element 31 on to the canvas.  Place it on the top left and behind Element 27.

C/P Element 50 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and in front of the other elements.

C/P Element 60 on to the canvas.  Place it on the bottom and behind the word art layers.

C/P Element 78 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the left and place it on the left side and behind the bird.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Delinda

Delinda
©Barbara Butler
May 2015

Supplies:
Kit:  Delinda by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Tube:  Delinda by Selisan Al-Gaib.  This tube can be found Here

New Image 800X600 72DPI

C/P Element 96 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand, expand the selection by 5, add a new layer and paste Pp3 into the selection, select none.

C/P Element 8 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the left side.

C/P Element 26 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind Element 8.

C/P Element 28 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the bottom right.

C/P Element 31 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the right side and behind the cat.

C/P Element 60 on to the canvas.  Re size it by 65% three times.  Place it on the top left.  Add a gradient glow of choice.  I used a cream color from the cat.

C/P Element 76 on to the canvas.  Place it on the right side and behind the other elements. 

C/P Element 126 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the left side and behind Element 8.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Pirates

Pirates
©Barbara Butler
May 2015

Supplies:
Kit:  Pirates by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL84

New Image 800X600 72DPI

Select all, paste Pp3 into the selection, select none.  Apply the mask and merge the mask group

C/P Element 8 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 13 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of Element 8.

C/P Element 18 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 58 on to the canvas.  Re size it by 65% twice.  Place it on left side and on top of the crates.

C/P Element 69 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 79 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 2 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 73 on to the canvas.  Place it on the right side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Natasha

I used the lovely Tube Natasha for these tags.  You can fine her Here

Miss August

Miss August
©Barbara Butler
May 2015

Supplies:
Kit:  Summer Sails by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Tube:  Miss August by Chris Pastel.  This tube can be found at http://tinyturtledesigns.com/store/
Mask:  WSL 84

New Image 800X600 72DPI.

Select all and paste Pp1 into the selection, select none.  Apply the mask and merge the group.

C/P Element 13 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 23 on to the canvas.  Re size it by 75% once.  Place it on the top left.

C/P Element 26 on to the canvas.  Place it on the right side.

C/P Element 43 on to the canvas.  Re size it by 65% twice.  Place it on the right side of Element 26.

C/P Element 48 on to the canvas.  Place it on the left side of Element 26.

C/P Element 50 on to the canvas.  Re size it by 65% once.  Place it towards the left.

C/P Element 52 on to the canvas.  Re size it by 65% three times.  Place it towards the left.

C/P Element 76 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 115 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 7 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the top right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Circus Fun

Circus Fun
©Barbara Butler
May 2015

Supplies:
Kit:  Circus Fun by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL194

New Image 800X600 72DPI

Select all, paste Pp6 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Place it in the middle of the canvas.  Duplicate it twice and re size each by 75% one more time.  Place one on the bottom left of the original and the other on the bottom right of the original.  Click on the inside of each with the magic wand, expand the selection of the large one by 5 and the two smaller ones by 3, add a new layer and paste Pp13 into the selection, and move the paper layers below the hoops.

C/P Element 7 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 1 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 12 on to the canvas.  Re size it by 65% twice.  Place it on the right side.  Rotate it 15 degrees to the left.

C/P Element 16 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of Element 12.

C/P Element 22 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the popcorn and tickets.

C/P Element 33 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 42 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind the other elements except the clown.

C/P Element 68 on to the canvas.  Re size it by 75% once.  Place it on the top left of the big hoop and behind the elephant on the right side (see my tag for better placement).

C/P Element 94 on to the canvas.  Re size it by 75% twice.  Place it to the right and behind the lion on the left side.

C/P Element 35 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements.  Take the reform tool and on the bottom middle node stretch down just a little bit.

C/P Element 30 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it behind the elements on the right side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Alaia

I used the lovely Tube Alaia for these tags.  You can fine her here.

 

Alavda

Alavda
©Barbara Butler
May 2015

Supplies:
Kit:  Alavda by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template:  310 by Millies PSP Madness.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright alyer and re size the canvas so the elements will fit on it properly.

Layers 1&2:  Select all, float, deflate.  Paste pp3 into the selection, select none.

Layer 3:  Select all, float, deflate.  Paste Pp5 into the selection, select none.

Layers 4&5:  Select all, float, deflate.  Paste Pp18 into the selection, select none.

Layer 6:  Select all, float, deflate.  Paste Pp3 into the selection, select none.

Layers 7&11:  Select all, float, deflate.  Paste Pp1 into the selection, select none.

Layers 9&13:  Select all, float, deflate.  Paste Pp4 into the selection, select none.

Layers 8, 10, 12, 14:  Select all, float, deflate.  Paste Pp3 into the selection, select none.

C/P Element 1 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 10 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 11 on to the canvas.  Re size it by 75% three times.  Place it on the left side and to the right of Element 10.

C/P Element 12 on to the canvas.  Re size it by 75% three times.  Place it on the left side and behind Element 11.

C/P Element 15 on to to the canvas.  Re size it by 75% once.  Place it on the right side and behind Element 1.

C/P Element 16 on to the canvas.  Place it on the bottom and center it in the middle.

C/P Element 23 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind Element 1.

C/P Element 24 on to the canvas.  Re size it by 65% three times.  Place it on the top right.

C/P Element 44 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 39 on to the canvas.  Re size it by 65% twice.  Place it on the top.  Add a gradient glow with settings of choice and use a light blue from the tag for the color.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Mothers N Daughters

Mothers N Daughters
©Barbara Butler
May 2015

Supplies:
Kit:  Mamas N Daughters by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL 84

New Image 800X600 72DPI

Select all, paste Pp16 into the selection, select none.  Apply the mask and merge the group.

C/P Element 4 on to the canvas.  Re size it by 75% once.  Place it on the right side.  Add a gradient glow of choice, I used a light shade of purple for mine.

C/P Element 10 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of Element 4.

C/P Element 19 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.

C/P Element 35 on to the canvas.  Re size it twice, once by 50% then by 75%.  Place it on the bottom left.

C/P Element 53 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind Element 35.

C/P Element 73 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 74 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind Element 35.

C/P Element 101 on to the canvas.  Re size it twice, once by 50% then by 75%.  Place it on the bottom right and in front of the other elements (see my tag for proper placement).

C/P Element 102 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Bottoms Up

Bottoms Up
©Barbara Butler
May 2015

Supplies:
Kit:  Bottoms Up by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template:  628 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

Layer 5:  Select all, float, deflate.  Paste Pp2 into the selection, select none.

Layers 1&2:  Select all, float, deflate.  Paste Pp4 into the selection, select none.

Layers 6&7:  Select all, float, deflate.  Paste Pp21 into the selection, select none.

Layer 4:  Select all, float, deflate.  Paste Pp9 into te selection, select none.

Layers 8-11:  Select all, float, deflate.  Paste Pp22 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 12:  Select all, float, deflate.  Paste Pp25 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original.  Add a gradient glow of choice.

Layer 3:  Select all, float, deflate.  Paste Pp20 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P the Beach Chair on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P the Beachball on to the canvas.  Re size it by 50% twice.  Place it on the bottom right and in front of the chair.

C/P Butterfly 2 on to the canvas.  Re size it by 50% once.  Place it on the top right.

C/P Drink 2 on to the canvas.  Re size it by 50% twice.  Place it on the bottom right and in front of the other elements.

C/P Mask 2 on to the canvas.  Re size it by 50% once.  Place it on the bottom left.

C/P Palm Tree on the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P SB on to the canvas (this is right after the sandcastle element).  Flip it horizontally and place it behind the Mask on the left side.

C/P Surfboard 1 on to the canvas.  Place it on the left side and between the mask and SB elements.

C/P Flower on to the canvas.  Re size it by 50% once.  Place it on the bottom right and behind the Chair.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Hannah

Hannah
©Barbara Butler
May 2015

Supplies:
Kit:  Hannah by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template:  625 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

Layer 2:  Select all, float, deflate.  Paste Pp10 into the selection, select none.

Layer 1:  Select all, float, deflate.  Paste Pp11 into the selection, select none.

Layer 3:  Select all, float, deflate.  Paste Pp12 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 4:  Select all, float, deflate.  Paste Pp15 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 5:  Select all, float, deflate.  Paste Pp4 into the selection, select none. 

Layers 6&7:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp3 into the selection.  On Layer 6 flip it horizontally.

Layers 8&9:  Select all, float, deflate.  Paste Pp13 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

C/P Element 1 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 5 on to the canvas.  Re size it 65% twice.  Place it on the left side and behind the word art layers.

C/P Element 17 on to the canvas.  Re size it by 75% once.  Place it on the top right and behind all the layers but 1 and 2.

C/P Element 32 on to the canvas.  Re size it by 50% once.  Place it on the top right and in front of everything else.

C/P Element 45 on to the canvas.  Re size it by 75% once.  Place it on the left side and in front of the other layers.

C/P Element 64 on to the canvas.  Re size it by 50% once.  See my tag for proper placement.

C/P Element 120 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the bird.

C/P Element 126 on to the canvas.  Leave it right where it is at, but make sure it is below the word art layers.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.