Autumn Blessings

~§~ Digi Divas ~§~ Please Do Not Share My Tags Autumn Blessing by Crystals Creations

Tags By:  Barbara Butler 

Kit:  Autumn Blessings by Crystal Creations.  Can be found at 

Digi Divas 

Winter White

Winter White

©Barbara Butler

October 2016

Supplies:

Kit:  Winter White by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Template:  700 by Millies PSPMadness

Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

PAPER:

Layer 9:  Select all, float, defloat.  Paste Pp5 as a new layer, invert the selection and hit the delete key, select none.  Close or Delete the original layer.  Repeat for Layer 10.

Layer 5:  Select all, float, defloat.  Paste Pp14 into the selection, select none.  Repeat for Layers 6-8.

Layer 3:  Select all, float, defloat.  Paste Pp1 into the selection, select none.  Repeat for Layer 4.

Layer 1:  Select all, float, defloat.  Paste Pp4 into the selection, select none.  Repeat for Layer 2.

Word Art:  Add a new layer, flood fill with a dark blueish color.  Back on the word art, Select all, Float, Defloat, back on the flood fill layer Promote Selection to Layer, select none.  Close off the flood fill layer.  Repeat for Layers 12 and 13.  On the word art layer only add a gradient glow and drop shadow of choice.

ELEMENTS: 

C/P Element 6 on to the canvas.  Re size it twice.  Place it on the left side.

C/P Element 28 on to the canvas.  Re size it once.  Place it on the right side.

C/P Element 36 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 59 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 73 on to the canvas.  Re size it three times.  Place it on the left side and behind Element 6.

C/P Element 75 on to the canvas.  Place it on the left side and behind Elements 6 and 73.

C/P Element 4 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Frost

Frost

©Barbara Butler

October 2016

Supplies:

Kit:  Frost by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Template 445 by Millies PSP Madness

Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

PAPER:

Layer 3:  Select all, float, defloat.  Paste Pp6 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp3 into the selection, select none.  Repeat for Layer 5.

Layer 1:  Select all, float, defloat.  Paste Pp18 into the selection, select none.  Repeat for Layer 2.  Add a dark gradient glow with glow width of 7.  Repeat but use a light color.  Repeat the dark glow.  Do this for both layers.

Layer 6:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

Layer 8:  Select all, float, defloat.  Paste Pp8 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat for Layer 9.  Add a gradient glow of choice.  Merge the two together and add a drop shadow.

Layer 7:  Select all, float, defloat.  Flood fill with a light pink from the tag.  Add a dark a gradient glow.

ELEMENTS:

C/P Element 9 on to the canvas.  Re size it once.  Place it on the bottom right.

C/P Element 6 on to the canvas.  Rotate it 15 degrees to the right and place it behind Element 9 on the right side.

C/P Element 14 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 25 on to the canvas.  Re size it twice.  Place it on the bottom right and in front of the other elements.

C/P Element 32 on to the canvas.   Re size it once.  Place it on the top left.

C/P Element 48 on to the canvas.  Place it on the bottom and behind the other elements.  Duplicate it and flip horizontally merge with the original.  Duplicate this one, flip it horizontally and place it on the bottom right.

C/P Element 86 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

C/P Element 85(the tube) on to the canvas.  Re size it twice.  Place towards the left and in front Layer 6.

C/P Element 76 on to the canvas.  Place it on the bottom right and behind the other elements.

C/P Element 39 on to the canvas.  Place it behind Element 85.  Add a gradient glow with glow width of 3 and with the following color #321a17.

On Layer 6 Select all, float, defloat.  Add a new layer and paste Element 19 into the selection, select none.  Add the same gradient glow as the previous step.  Keep selected and add another layer and this time paste Element 5 into the selection, select none.  Add a drop shadow.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Pumpkin Patch

Scrap Kit:   Pumpkin Patch by Michelle's Myths.  This kit can be found at the following store(s).

Digi Divas, PFD

Purple Women

Scrap Kit:  Purple Women  by Whisper In The Wind.  This kit can be found at the following store(s)

PFD, Mystical Scraps, Hania's Design 

Ines

Tube:  Ines By Alehandra Vanhek.  Can be found at 

Tiny Turtle Designs

Halloween

Kit:  Halloween by Bella Caribena.  Can be found at Digi Divas 

Autumn Spice

Autumn Spice

©Barbara Butler

October 2016

Supplies:

Kit:  Autumn Spice by Amy Marie.  This kit can be found at 

Amy Marie Kits

Template:  672 by Millies PSPMadness

Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

PAPERS: 

Layer 5:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp6 into the selection, select none.  Repeat for Layer 4.

Layer 8:  Select all, float, defloat.  Paste Pp18 into the selection, select none.  Repeat for Layer 9.

Layer 7:  Select all, float, defloat.  Paste Pp22 into the selection, select none.

Layer 12:  Select all, float, defloat.  Paste Pp21 into the selection, Selections:  Modify, Selection Borders:  Outside Checked, Width 2.  Add a new layer and paste Pp20 into the selection, move this below Layer 12.  Merge the two together.

Layer 3:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp3 into the selection, select none.

ELEMENTS:

C/P Element 3 on to the canvas.  Re size it once.  Place it to the left and behind the word art layer.

C/P Element 9 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 16 on to the canvas.  Re size it twice.  Place it to the right and behind the word art layer.

C/P Element 27 on to the canvas.  Re size it three times.  Place it on the left of the word art and in front of everything.

C/P Element 33 on to the canvas.  Re size it three times.  Flip it horizontally and place it on the right side.

C/P Element 36 on to the canvas.  Re size it once.  Flip it horizontally and placde it on the right side and behind the other elements.

C/P Element 54 on the canvas.  Re size it once.  Place it on the bottom and behind the other elements.

C/P Element 63 on to the canvas.  Re size it three times.  Place it on the top left and in front of the other elements.

C/P Element 78 on to the canvas.  Re size it once.  Place it on the left side.

C/P Element 88 on to the canvas.  Re size it twice.  Place it on the  right side and behind the other elements except the flower.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Bitten

Bitten

©Barbara Butler

October 2016

Supplies:

Kit:  Bitten by Amy Marie.  This kit can be found at 

Amy Marie Kits

 Template:  Bad-itude Forum set by Syllyreationz.  This can be found Here 

Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the templates.  Check to make sure they are at 72DPI.  Duplicate them and close the original.  Now with this being a three piece forum set I will be doing them one at a time starting with the tag template.  

Tag:

PAPERS:

Purple Circle:  Select all, float, defloat.  Paste Pp1 into the selection, select none.  Repeat for Grey Circle.

Green Circle Fritillary:  Select all, float, defloat.  Paste Pp3 into the selection, select none.  Add fritillary back using the following settings:  Gran: 4, Aggression: 30, Tesslation:  57, Variation:  84.

Light Purple Dotted Circle:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

Large Green Rectangle:  Select all, float, defloat.  Paste Pp15 into the selection, select none.

Light Orange Rectangle Back:  Select all, float, defloat.  Paste Pp14 into the selection, select none.  Repeat for the Dark Orange Back Rectangle.

3 Circles:  Select all, float, defloat.  Paste Pp9 into the selection, select none.

3 Circles Noisy Gradient:  Select all, float, defloat.  Paste Pp10 into the selection, select none.  Repeat for Dark Purple Rectangle, Light Orange Rectangle.

Small Green Rectangle:  Select all, float, defloat.  Paste Pp6 into the selection, select none.  Repeat for Dark Orange Rectangle.

Text Bad-itude:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Bad-itude White Back:  Select all, float, defloat.  Paste 3 into the selection, select none.

ELEMENTS:

C/P Element 11 on to the canvas.  Re size it once.  Place it on the bottom right.

C/P Element 8 on to the canvas.  Re size it once.  Place it on the bottom right and behind Element 11.

C/P Element 21 on to the canvas.  Place it on the bottom left.  Rotate it 15 degrees to the left.

C/P Element 25 on to the canvas.  Re size it once.  Place it on the left side and in front of the other elements.

C/P Element 32 on to the canvas.  Re size it three times.  Place it on the bottom left and in front of the other elements.

C/P Element 33 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 39 on to the canvas.  Re size it once.  Rotate it 15 degrees to the left and place it on the top left.

C/P Element 57 on to the canvas.  Re size it once.  Place it on the left side and behind the other elements.

C/P Element 91 on to the canvas.  Place it on the right side and behind the other elements except Element 33.

C/P Element 89 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

C/P Element 90 on to the canvas.  Re size it twice.  Place it on the bottom right and in front of the other elements.

C/P Element 85 on to the canvas.  Leave it right where it is at.  Select all, float, defloat.  Add a new layer, flood fill with White, and add constellation with settings of choice.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I am using the tube that comes with the kit for all three.  So settings will probably be different depending on the tube you choose.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Banner:

PAPER:

3 Circles:  Select all, float, defloat.  Paste Pp9 into the selection, select none.

3 Circles Gradient:  Select all, float, defloat.  Paste Pp10 into the selection, select none.

Green Rectangle:  Select all, float, defloat.  Paste Pp6 into the selection, select none.  Repeat for Dark Orange Rectangle.

Light Orange Rectangle:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

Light Purple Rectangle:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

ELEMENTS:  

C/P Element 89 on to the canvas.  Re size it four times.  Place it on the left side.

C/P Element 91 on to the canvas.  Re size it twice.  Place it on the right side.

C/P Element 90 on to the canvas.  Re size it twice.  Place it on the right side.

C/P Element 11 on to the canvas.  Re size it twice.  Place it on the right side and behind Element 90.

C/P Element 32 on to the canvas.  Re size it four times.  Place it on the left side and behind the other elements.

C/P Element 25 on to the canvas.  Re size it twice.  Place it on the left side and behind the other elements.

Avatar:

Purple Circle:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

Gradient Back:  Select all, float, defloat.  Paste Pp3 into the selection, select none.  Apply fritillary with the same settings as before.

Back on the Purple Circle, Select all, float, defloat.  Paste Tube on to the canvas.  Re size it once, move the tube where the face is inside the selection, invert the selection and hit the delete key, select none.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Wendy The Witch

Wendy The Witch

©Barbara Butler

October 2016

Supplies:

Kit:  Wendy the Witch by Amy Marie.  This kit can be found at 

Amy Marie Kits

 Template:  Template 7 Halloween by Made by Allison.  This template can be found at www.allisonsaddictions.blogspot.ca

Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

SPECIAL ANNOUNCEMENT:  Kits on Sale for .74 until November

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

PAPERS:

Layer 5:  Select all, float, defloat.  Paste Pp1 into the selection, select none.  Repeat for Layer 6.

Layer 11:  Select all, float, defloat.  Paste Pp2 into the selection, select none.  Repeat for Layers 17, 22, 24.

Layer 26:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

Layer 15:  Select all, float, defloat.  Paste Pp6 into the selection, select none.  Repeat for Layer 19.

Layer 7:  Select all, float, defloat.  Paste Pp5 into the selection, select none.  Repeat for Layer 8.

Layer 2:  Select all, float, defloat.  Paste Pp7 into the selection, select none.  Repeat for Layer 4.

Layer 13:  Select all, float, defloat.  Paste Pp8 into the selection, select none.  Repeat for Layer 9.

Word Art Layers:  Top Select all, float, defloat, paste Pp1 into the selection, select none.  Middle flood fill with black.  Delete the bottom two.  Merge the others together.

ELEMENTS:

C/P Element 6 on to the canvas.  Re size it twice.  Place it on the right side and behind the word art.

C/P Element 15 on to the canvas.  Place it on the bottom right and in front of the other elements.

C/P Element 14 on to the canvas.  Re size it twice.  Place it on the top left.

C/P Element 16 on to the canvas.  Re size it once.  Flip it horizontally and place it on the left of the word art and below it.

C/P Element 23 on to the canvas.  Re size it twice.  Place it on the top right.

C/P Element 25 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

C/P Element 27 on to the canvas.  Place it on the top right and send to the bottom.

C/P Element 33 on to the canvas.  Place it on the left side and behind the ghosts.

C/P Element 51 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 52 on to the canvas.  Re size it once.  Place it on the right side and in front of the word art.

C/P Element 60 on to the canvas.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  Depending on the tube you use you might have to move the word art around a little bit.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Odella

~§~ Digi Divas ~§~ Please Do Not Share My Tags Odella by Natalia NZ

Tube:  Odella By Natalia NX.  Can be found at Digi Divas 

Spooky Night

Kit:  Spooky Night By Daemans Designs.  Can be found at 

Digi Divas 

Black Widow

Black Widow

©Barbara Butler

October 2016

Supplies:

Kit:  Black Widow by Amy Marie.  This kit can be found at 

Amy Marie Kits

http://amymarieskits.com/store/index.php?main_page=index&cPath=1 

Template:  666 by Millies PSPMadness

Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete copyright layer and re size the canvas.

PAPER:

Layer 1:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

Layer 5:  Select all, float, defloat.  Paste PP11 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp14 into the selection, select none.  Repeat for Layer 3.

Layer 6:  Select all, float, defloat.  Paste Pp10 into the selection, select none.  

Layers 8-12:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

Merge the word art layers together and apply a gradient glow of choice.  And move it to the top.

ELEMENTS:

C/P Element 4 on to the canvas.  Re size it twice.  Flip it horizontally and place it on the top right.

C/P Element 9 on to the canvas.  Re size it twice.  Place it on the bottom left.

C/P Element 10 on to the canvas.  Re size it three times.  Place it on the bottom left and in front of Element 9.

C/P Element 15 on to the canvas.  Place it on the bottom and behind the other elements.  Rotate it 15 degrees to the left.

C/P Element 27 on to the canvas.  Flip it horizontally and place it on the right side.

C/P Element 69 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 72 on to the canvas.  Re size it twice.  Place it on the bottom right and in front of the other elements.

C/P Element 81 on to the canvas.  Re size it twice.  Place it on the bottom right and behind Element 72.

C/P Element 96 on to the canvas.  Place it on the top left.

C/P Element 84 on to the canvas.  Re size it once.  Flip it horizontally and place it behind Element 9.  Rotate it 15 degrees to the left.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I am using the one that comes with the kit.  I re sized it once and left it where it was at.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Autumn Daze

Autumn Daze

©Barbara Butler

October 2016

Supplies:

Kit:  Autumn Daze by Amy Marie.  This kit can be found at 

Amy Marie Kits

 Mask:  SC-Mask04 by Syllycreationz.  You can fine this mask Here 

Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

New Image:  960X720 72DPI

Select all, paste Pp8 into the selection, select none.  Apply the mask and merge the group.  Re size it once.

C/P Element 1 on to the canvas.  Re size it once.  Place it on the bottom left.

C/P Element 19 on to the canvas.  Place it on the bottom left and behind Element 1.  Take the deform tool and stretch it to the right just a little bit.

C/P Element 28 on to the canvas.  Place it on the bottom left and behind the other elements.

C/P Element 39 on to the canvas.  Re size it once.  Place it on the left side and behind the other elements.

C/P Element 48 on to the canvas.  Flip it horizontally and place it towards the right side and behind the other elements.

C/P Element 60 on to the canvas.  Re size it once.  Place it on the top right.

C/P Element 95 on to the canvas.  Re size it twice.  Place it on the bottom right and in front of the other elements.

C/P Element 101 on to the canvas.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Ooooky Spooky Halloween

Kit:  Ooooky Spooky Halloween by Dance In The Rain.  Can be found at Digi Divas 

For the Love of Apples

Scrap Kit:   For the Love of Apples by Whisper In The Wind.  This kit can be found at the following store(s)

PFD, Mystical Scraps, Hania's Design 

Halloweennn

Kit:  Halloweennn by Bella Caribena.  Can be found at Digi Divas 

Jacqueline

Tube:  Jacqueline by Alehandra Vanhek.  Can be found at 

Tiny Turtle Designs

September

September

©Barbara Butler

October 2016

Supplies:

Kit:  September  by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Template:  671 by Millies PSP Madness

Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

PAPERS:

Layer 6:  Select all, float, defloat.  Paste Pp16 as a new layer, promote the selection to layer, select none.  Repeat for Layer 8 (now you can go to layer 8 before deleting the paper layer so you dont have to paste it again if you want).

Layer 4:  Select all, float, defloat.  Paste Pp3 into the selection, select none.

Layer 5:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp6 into the selection, select none.  Repeat for Layer 3.

Layer 1:  Select all, float, defloat.  Paste Pp14 as a new layer, Promote Selection to Layer, select none.  Delete the paper layer and the original layer.

Layer 7:  Select all, float, defloat.  Paste Pp5 as a new layer, Promote Selection to Layer, select none.  Delete the paper and the original layers.

ELEMENTS:

C/P Element 8 on to the canvas.  Place it on the right side and rotate it 30 degrees to the left.

C/P Element 7 on to the canvas.  Re size it once.  Place it on the right side and behind Element 8.

C/P Element 15 on to the canvas.  Re size it once.  Place it on the right side and in front of the other elements.

C/P Element 25 on to the canvas.  Place it on the top left and behind everything else.

C/P Element 27 on to the canvas.  Re size it once.  Place it on the bottom left and in front of everything else.

C/P Element 32 on to the canvas.  Re size it twice.  Place it on the top right and in front of the other elements.

C/P Elemengt 49 on to the canvas.  Re size it three times.  Place it on the top right and behind Element 32.

C/P Element 53 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 58 on to the canvas.  Re size it once.  Flip it horizontally and place it on the top left.  Rotate it 15 degrees to the right.

C/P Element 63 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 64 on to the canvas.  Re size it once.  Place it on the bottom left and behind the other elements.

C/P Element 74 on to the canvas.  Re size it three times.  Place it on the top right and in front of the other elements.

C/P Element 82 on to the canvas.  Place it on the top left and in front of the other elements.

C/P Element 41 on to the canvas.  Place it on the left side and behind the other elements.  Rotate it 15 degrees to the left.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.