Summer Sunset

Summer Sunset

©Barbara Butler

May 2016

Supplies:

Kit:  Summer Sunset  by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Template:  774 by Millies PSP Madness

Tube:  

Font:  

Special Settings:  All Elements will be re sized by 75% unless otherwised stated.  

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size.

PAPERS:

Layer 5:  Select all, float, defloat.  Paste Pp13 into the selection, select none.

Layer 6:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp7 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp9 into the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp15 into the selection, select none.

Layers 8&9:  Using the Manual Colorization tool change the color of these levels.

ELEMENTS:

C/P Element 4 on to the canvas.  Re size it once.  Place it on the left side.

C/P Element 11 on to the canvas.  Re size it twice.  Flip it horizontally and place it on the bottom left and in front of the other elements.

C/P Element 17 on to the canvas.  Re size it once.  Place it on the left side and behind the other elements.

C/P Element 18 on to the canvas.  Re size it once.  Place it on the bottom left and behind Element 11.

C/P Element 35 on to the canvas.  Place it on the bottom right.

C/P Element 40 on to the canvas.  Place it on the top right.  Duplicate it, re size the duplicate once and move it to the left of the original.  Duplicate this one and move this one over to the right of the original.

C/P Element 45 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 63 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 65 on to the canvas twice.  Place them where you would like.

C/P Element 6 on to the canvas.  Re size it five times.  Place it on top of Element 63.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Summer Ice

Summer Ice

©Barbara Butler

May 2016

Supplies:

Kit:  Summer Ice  by Amy Marie.  This kit can be found at 

Amy Marie Kits

 Template:  238 by Millies PSP Madness

Special Settings:  All Elements will be re sized by 75% unless otherwised stated.

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and Word Art Layers.  Re size the canvas so the Elements will fit later on.

PAPERS:

Layer 1:  Select all, float, defloat.  Paste Pp11 into the selection, select none.  Repeat for Layer 2.

Layer 3:  Select all, float, defloat.  Paste Pp16 into the selection, select none.  

Layer 4:  Select all, float, defloat.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 5:  Select all, float, defloat.  Paste Pp10 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat for Layer 6.

Layer 7:  Select all, float, defloat.  Paste Pp22 into the selection, select none.  Repeat for Layer 8.

Layer 9:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

ELEMENTS:

C/P Element 3 on to the canvas.  Re size it twice.  Place it on the bottom left.

C/P Element 15 on to the canvas.  Re size it twice.  Place it on the top right.

C/P Element 21 on to the canvas.  Re size it once.  Place it on the bottom right and duplicate it once so it will show up a little bit better.

C/P Element 19 on to the canvas.  Place it on the bottom left and behind the other elements.

C/P Element 31 on to the canvas.  Re size it three times.  Place it on the bottom right and behind the other elements.

C/P Element 54 on to the canvas.  Place it on the bottom right and behind the other elements.  Duplicate it and move the duplicate to the left just a little bit.  Merge the two together.  Duplicate this one, flip it horizontally and place it behind the elements on the left side.

C/P Element 33 on to the canvas.  Re size it once.  Rotate it 30 degrees to the right and place it on the bottom right and in front of the other elements.

C/P Element 13 on to the canvas.  Re size it once.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

USA Party

Template: the template I used for one of the tags is apart of a forum set I made called American Pride.  You can fine it Here 

Scrap Kit:   USA Party by Dance In The Rain

Digi Divas:

Tropical Paradise

Tropical Paradise

©Barbara Butler

May 2016

Supplies:

Kit:  Tropical Paradise by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Template:  250 by Millies PSP Madness

Tube:  

Font:  

Special Settings:  All Elements will be re sized by 75%.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Close or delete the copyright layer.  Re size the canvas to a bigger size.

PAPERS:

Layer 5:  Select all, float, defloat.  Paste Pp11 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp1 into the selection, select none.  Repeat for Layer 3.

Layer 1:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Layers 7, 8, 9:  Delete these layers.

ELEMENTS:

C/P Element 1 on to the canvas.  Re size it twice.  Place it on the top left.

C/P Element 8 on to the canvas.  Re size it once.  Place it on the bottom left.

C/P Element 9 on to the canvas.  Re size it three times.  Flip it horizontally and place it on the bottom right.

C/P Element 14 on to the canvas.  Re size it four times.  Place it on the left side and flip it horizontally.

C/P Element 28 on to the canvas.  Re size it once.  Rotate it 15 degrees to the right and place it behind the elements on the right side.

C/P Element 45 on to the canvas.  Place it on the bottom right and behind the other elements.

C/P Element 46 on to the canvas.  Re size it twice.  Place it on the bottom and behind the other elements.

C/P Element 51 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

C/P Element 52 on to the canvas.  Re size it once.  Place it on the top left and behind all of the layers.  Duplicate it and place this one on the top right.

C/P Element 59 on to the canvas.  Re size it once.  Place it on the top right and in front of the other elements.

C/P Element 89 on to the canvas.  Re size it once.  Place it on the bottom left and behind the other elements.  Duplicate it and move the duplicate over to the right just a little bit.

C/P Element 96 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Caria Lea

Tube:  Caria Lea by Selisan Al-Gaib.  Can be found at 

Tiny Turtle Designs

Steampunk Heaven

Scrap Kit:  Steampunk Heaven by Dance In The Rain

Digi Divas

Twilight

Twilight

©Barbara Butler

May 2016

Supplies:

Kit:  Twilight  by Amy Marie.  This kit can be found at 

Amy Marie Kits

 Template:  635 by Millies PSP Madness

Special Settings:  All Elements will be re sized by 75% unless otherwised stated.

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

PAPERS:

Layer 7:  Select all, float, defloat.  Paste Pp2 into the selection,  select none.  Repeat for Layer 8

Layer 4:  Select all, float, defloat.  Paste Pp4 into the selection, selec none.

Layer 6:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

Layer 2:  Select all, float, defloat.  Past Pp19 as a new layer, invert the selection and hit the delete key, select none.  Delete or close the original layer.  Repeat for Layer 3.

Layer 1:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

ELEMENTS:

On Layer 7, Select all, float, defloat.  Add a new layer and paste Element 12 into the selection, select none.  Duplicate once (so it will show up a little better).

C/P Element 11 on to the canvas.  Re size it twice.  Place it on the bottom right.

C/P Element 14 on to the canvas.  Rotate it 15 degrees to the left and place it on the left side.

C/P Element 20 on to the canvas.  Re size it twice.  Place it on the bottom right and behind the other elements.

C/P Element 39 on to the canvas.  Re size it three times.  Place it on the left side.

C/P Element 48 on to the canvas.  Re size it twice.  Rotate it 15 degrees to the left and place it on the bottom left and in front of the other elements.

C/P Element 49 on to the canvas.  Place it on the bottom and place it behind the Elements on the right side.

C/P Element 56 on to the canvas.  Re size it twice.  Rotate it 15 degrees to the right and place it on the top right.

C/P Element 73 on to the canvas.  Re size it twice.  Place it on the right side.

C/P Element 102 on to the canvas.  Re size it twice.  Place it on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Fairy

Tube:  Fairy by Disco Science.  Can be found at 

Tiny Turtle Designs

Summer

Enticement

Enticement

©Barbara Butler

May 2016

Supplies:

Kit:  Enticement by Amy Marie.  This kit can be found at 

Amy Marie Kits

 Template:  272 by Millies PSP Madness.  

Special Settings:  All Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and word art layers.  Re size the canvas so the elements will fit.

PAPERS:

Layer 5:  Select all, float, defloat.  Paste Pp11 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp13 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp7 into the selection, select none.  Repeat for Layer 7.

ELEMENTS:

C/P Element 1 on to the canvas.  Re size it twice.  Rotate it 15 degrees to the left and place it on the bottom right.

C/P Element 3 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

C/P Element 17 on to the canvas.  Re size it once.  Place it on the bottom right and in behind Element 3.

C/P Elements 22 and 23 on to the canvas.  Place both on the right side and behind the other elements.  Place one to the left of the other.  I placed 22 behind and to the right of the 23.

C/P Element 49 on to the canvas.  Re size it three times.  Place it on the bottom right.

C/P Element 61 on to the canvas.  Re size it twice.  Place it on the top left.

C/P Element 75 on to the canvas.  Re size it twice.  Place it on the top right and behind the other elements.

C/P Element 83 on to the canvas.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Singing The Blues

Singing The Blues

©Barbara Butler

May 2016

Supplies:

Kit:  Singing The Blues by Amy Marie.  This kit can be found at 

Amy Marie Kits

 Template:  804 by Millies PSP Madness

Tube:  

Font:  

Special Settings:  All Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate and close the original.  Delete the copyright layer and re size the canvas so the elements will fit later.

Paper:

Layer 9:  Select all, float, deflate.  Paset Pp11 into the selection, select none.

Layer 7:  Select all, float, deflate.  Paste Pp15 into the selection, select none.  Repeat for Layer 8.

Layer 3:  Select all, float, deflate.  Paste Pp14 into the selection, select none.  Repeat for Layer 4.

Layer 5:  Select all, float, deflate.  Paste Pp5 into the selection, select none.  Repeat for Layer 6.

Layer 1:  Select all, float, deflate.  Paste Pp2 into the selection, select none.  Repeat for Layer 2, and the Word Art Layers.  Add a gradient glow to the word art layers.

Elements:

C/P Element 4 on to the canvas.  Re size it twice.  Place it on the bottom left and behind the word art layers.

C/P Element 6 on to the canvas.  Re size it once.  Place it on the left side and behind the other elements.

C/P Element 24 on to the canvas.  Re size it twice times.  Place it on the bottom right.

C/P Element 33 on to the canvas.  Re size it once.  Place it on the bottom.

C/P Element 45 on to the canvas.  Re size it twice.  Place it on the bottom right and behind the other elements.

C/P Element 50 on to the canvas.  Re size it once.  Rotate it 30 degrees to the left.  Place it on the left side and behind the other elements.

C/P Element 69 on to the canvas.  Re size it three times.  Place it on the left side and anywhere on top of Element 50.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

.Thank you for taking a look at my tut.  I hope you have enjoyed it.

Jessica

Tube:  Jessica by Lysisange.  Can be found at 

Tiny Turtle Designs

Angel Kitty

Tube:  Angel Kitty by Lady Mishka  .  Can be found at 

Digi Divas 

Beach Vacation

Kit:  Beach Vacation by Dance In The Rain.  Can be found at 

Digi Divas 

Dark Love

Dark Love

©Barbara Butler

May 2016

Supplies:

Kit:  Dark Love  by Amy Marie.  This kit can be found at 

Amy Marie Kits

Template:  799 by Millies PSP Madness

Special Settings:  All Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size so the elements will fit.

Paper:

Layer 1:  Select all, float, deflate.  Paste Pp7 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

Layer 3:  Select all, float, deflate.  Paste Pp17 into the selection, select none.

Layer 4:  Select all, float, deflate.  Paste Pp10 into the selection, select none.

Layer 5:  Select all, float, deflate.  Paste Pp5 into the selection, select none.

Layer 6:  Using the manual color changer change the color to a color of choice.  Repeat for Layer 7.  Merge them together and move to the top.  Re size it by 75% once.

Layer 8:  Select all, float, deflate.  Paste Pp13 into the selection, select none.  Repeat for Layer9.

Elements:

C/P Element 2 on to the canvas.  Re size it twice.  Place it on the bottom left.

C/P Element 7 on to the canvas.  Re size it once.  Place it on the top right and behind the word art layer.

C/P Element 13 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 19 on to the canvas.  Re size it twice.  Place it on the top left and behind all of the other layers.

C/P Element 32 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

C/P Element 38 on to the canvas.  Place it on the bottom left and behind the other elements.  Take the deform tool and stretch it out just a little bit.

C/P Element 60 on to the canvas.  Re size it twice.  Place it on the bottom left and behind the other elements.

C/P Element 77 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 81 on to the canvas.  Re size it once.  Place it on the bottom left and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Kate

Tube:  Kate by Alehandra Vanhek.  Can be found at 

Tiny Turtle Designs

What The Heart Wants

Kit:  What the Heart Wants by AllyCat's Purrfect Kit Creations.  Can be found at 

Digi Divas

Lilac Waves

Lilac Waves

©Barbara Butler

May 2016

Supplies:

Kit:  Lilac Waves by Amy Marie.  This kit can be found at 

Amy Marie Kits 

Mask:  M4MCApril by Mythical Designs.  Can be found at Creative Misfits Blog

Special Settings:  All Elements will be re sized by 75% unless otherwised stated.

New Image 800X600 72DPI.

Select all, paste Pp10 into the selection, select none.  Apply the mask and merge the group.  Re size it by 75%.  Duplicate it once (this helps it to show a little bit more).

C/P Element 2 on to the canvas.  Place it on the right side.

C/P Element 30 on to the canvas.  Re size it once.  Place it on the left side.

C/P Element 37 on to the canvas.  Re size it once.  Place it on the right side and behind the other elements.

C/P Element 49 on to the canvas.  Re size it twice.  Place it on the left side and in front of the other elements.

C/P Element 47 on to the canvas.  Place it on the left side and behind the other elements.  Rotate it 15 degrees to the left.

C/P Element 50 on to the canvas.  Re size it twice.  Flip it horizontally and place it behind Element 49 on the left side.

C/P Element 63 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

C/P Element 60 on to the canvas.  Re size it once.  Place it on the top right and in front of the other elements.

C/P Element 66 on to the canvas.  Re size it three times.  Rotate it 15 degrees to the left and place it on the bottom right and behind Element 63.

C/P Element 71 on to the canvas.  Re size it by 85% twice.  Place it behind the other elements.  Click on the inside with the magic wand, expand the selection by 12, add a new layer and paste Pp16 into the selection, move the paper below the frame, select none.

C/P Element 77 on to the canvas.  Place it on the top left of the frame and behind the frame and paper layers.

C/P Element 108 on to the canvas.  Re size it once.  Place it on the top right and behind Element 60.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Beach Party

Kit:  Beach Party by Scrappin with Lil Ole Me.  Can be found at 

Digi Divas 

Melissa

Melissa

©Barbara Butler

May 2016

Supplies:

Kit:  Melissa by Amy Marie.  This kit can be found at 

Amy Marie Kits

Tube:  Melissa by Chris Pastel.  This tube can be found at 

Tiny Turtles

 Template:  CakesTemp 1.  This template can be found here. 

Special Settings:  All Elements will be re sized by 75% unless other wised stated.  And on the paper layers when it says paste into the selection you might want to hit the delete key a couple of times.

Open up the template and check to make sure it is at 72DPI.  Duplicate and close the original.  Delete the copyright layer and re size the canvas.

Papers:

Circle 1:  Select all, float, defloat.  Paste Pp11 into the selection, select none.

Circle 2:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Circle 3:  Select all, float, defloat.  Paste Pp20 into the selection, select none.  Repeat for Circles 4-6.

Circles 5:  Select all, float, defloat.  Go to Outer Circle 5 and hit the delete key, select none.  Repeat for Circle 6 and Outer Circle 6.

Outer Circle 5:  Select all, float, defloat.  Paste Pp5 into the selection, select none.  Move this above Cirlce 5.  Repeat for Outer Circle 6.

Rectangle 1:  Select all, float, defloat.  Paste Pp19 into the selection, select none.  Repeat for Rectangle 2.

Elements:

C/P Element 4 on to the canvas.  Rotate it 15 degrees to the left and place it on the left side.

C/P Element 7 on to the canvas.  Place it on the top left.

C/P Element 8 on to the canvas.  Place it on the bottom left.

C/P Element 20 on to the canvas.  Place it on the top right.  Take the deform tool and stretch it out just a little bit.

C/P Element 27 on to the canvas.  Re size it once.  Place it on the left side and in front of the other elements.

C/P Element 29 on to the canvas.  Place it on the right side.

C/P Element 32 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

C/P Element 33 on to the canvas.  Place it on the left side and behind Element 32.

C/P Element 51 on to the canvas.  Re size it three times.  Place it on the bottom left and in front of the other elements.

C/P Element 106 on to the canvas.  Re size it once.  Flip it horizontally and place it on the bottom right.

C/P Element 96 on to the canvas.  Re size it twice.  Place it on the top right.

C/P Element 93 on to the canvas.  Re size it three times.  Place it on the bottom right.

C/P Element 94 on to the canvas.  Re size it twice.  Place it in front and to the left of Element 93.

C/P Element 92 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 78 on to the canvas.  Flip it horizontally and place it on the top left and in front of the other elements.

C/P Element 67 on to the canvas.  Place it behind the other elements on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Born In The USA

Scrap Kit:  Born In The USA by ChocUK Designs

This Kit can be found at

Digi Divas

Marnie

Tube:  Marnie by Sophie Villette.  Can be found at 

Tiny Turtle Designs