Pages

Thursday, April 28, 2016

Mob Scene






Scrap Kit:  Mob Scene by ChocUK Designs.  This kit can be found at

Template Forum Set 1 by Me.  These can be found Here.



Wednesday, April 27, 2016

Mystic Treasure

Mystic Treasure
©Barbara Butler
April 2016



Supplies:
Kit:  Mystical Treasure by Amy Marie.  This kit can be found at
Mask:  WSL84
Tube:  I am using the tube that comes in the kit.
Special Settings:  All Elements will be resized by 75% unless other wised stated.  Drop Shadow:  V&H:4, OP:85, Blur:8 Color: #1c1a1a

New Image 800X600 72DPI

Select all, paste Pp10 into the selection, select none.  Apply the mask and merge group.

C/P Element 92 on to the canvas.  Re size it once.  Click on the inside with the magic wand, expand it by 8, add a new layer and paste Pp11 into the selection, move paper layer below the frame, select none.

C/P Element 16 on to the canvas.  Re size it twice.  Rotate 15 degrees to the left.  Place it on the left side and in front of the frame.

C/P Element 53 on to the canvas.  Re size it once.  Place it on the bottom of the frame.

C/P Element 65 on to the canvas.  Re size it once.  Place it on the top right of the frame.  Flip it horizontally and rotate it 15 degrees to the left.  Add a drop shadow using the settings above.

C/P Element 88 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

C/P Element 95 on to the canvas.  Place it on the left side and behind the other elements including the frame.

C/P Element 13 on to the canvas.  Re size it three times.  Rotate it 15 degrees to the right and place it on the bottom and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Saturday, April 23, 2016

Butterfly Beauty

Butterfly Beauty
©Barbara Butler
April 2016




Supplies:
Kit:  Butterfly Beauty  by Amy Marie.  This kit can be found at the following stores 
 Template:  804 by Millies PSP Madness
Tube:  Blaze by VeryMany.  You can fine this tube at Very Many Tubes
Font:  Lyric Dragon.  This font can be found at Dafont
Special Settings:  Elements are re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate and close the original.  Delete the copyright layer and re size the canvas to a bigger size so the elements will fit.

Paper Layers:

Layer 1:  Select all, float, deflate.  Paste Pp18 into the selection, select none.  Repeat for Layer 2.

Layer 3:  Select all, float, deflate.  Paste Pp11 into the selection, select none.  Repeat for Layer 4.

Layer 5:  Select all, float, deflate.  Paste Pp4 into the selection, select none.  Repeat for Layer 6.

Layer 7:  Select all, float, deflate.  Paste Pp2 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat for layers 8 and 9.

Layer 12:  Select all, float, deflate.  Paste Pp6 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat for Layer 14.  Add a gradient glow.

Layer 11:  Select all, float, deflate.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Add a gradient glow.  Repeat for Layer 13.

Layer 10:  Select all, float, deflate.  Paste Pp7 into the selection, select none.

Merge all the word art layers together.  Move over to the bottom right and add a drop shadow with the following settings:  V:4, H:6, OP:86, Blur:2  Color:  #300719.

Elements:

C/P Element 3 on to the canvas.  Place it on the bottom right and behind the merged word art layers.

C/P Element 13 on to the canvas.  Re size it twice.  Place it on the bottom left.

C/P Element 23 on to the canvas.  Flip it horizontally, rotate it 15 degrees to the left and place it behind the elements on the left side.

C/P Element 37 on to the canvas.  Re size it twice.  Rotate it 15 degrees to the right and place it on the top right.  Add the same drop shadow as before but change the blur setting to 7.

C/P Element 39 on to the canvas.  Re size it twice.  Place it on the bottom right and behind the other elements.

C/P Element 41 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.  Make sure it is not covering the word art layer.

C/P Element 61 on to the canvas.  Re size it once.  Place it on the bottom left and behind Element 3.

C/P Element 64 on to the canvas.  Re size it once.  Place it on the left side and behind the other elements.

C/P Element 72 on to the canvas.  Place it on the top left and behind some of the paper layers.

C/P Element 102 on to the canvas.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  Depending on the tube you choose you might have to move some of the elements around.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.


Thank you for taking a look at my tut.  I hope you have enjoyed it.

Friday, April 15, 2016

Girl Fashion




Tube:  Girl Fashion By Lysisange.  Can be found at 


Roses Are Red

Roses Are Red
©Barbara Butler
April 15, 2016



Supplies:
Kit:  Roses Are Red by Amy Marie.  This kit can be found at the following stores 
Amy Marie Kits
http://amymarieskits.com/store/index.php?main_page=product_info&cPath=1&products_id=2762 Template: Template:  001 by me and it can be found Here
Special Instructions:  All Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a little bit bigger size.

Papers:
Raster 2:  Select all, float, deflate.  Paste Pp4 into the selection, select none.

Raster 6:  Select all, float, deflate.  Paste Pp5 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat for Raster 7.

Raster 4: Select all, float, deflate.  Paste Pp24 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat for Rasters 3&9.

Raster 8:  Select all, float, deflate.  Paste Pp1 into the selection, select none.

Raster 10:  Select all, float, deflate.  Paste Pp3 into the selection, select none.

Raster 5:  Select all, float, deflate.  Paste Pp12 into the selection, select none.

Raster 11:  Select all, float, deflate.  Paste Pp11 into the selection, select none.  Repeat for Copy of Vector 1.  Add a gradient glow of choice to both layers.

Elements:

C/P Element 5 on to the canvas.  Re size it twice.  Place it on the bottom right and behind the word art layer.

C/P Element 14 on to the canvas.  Rotate it 15 degrees to the right and place it behind Element 5.

C/P Element 27 on to the canvas.  Place it on the left side.

C/P Element 49 on to the canvas.  Place it on the top right and behind the other elements.

C/P Element 59 on to the canvas.  Re size it twice.  Place it on the bottom right and in front of Element 5 but behind the word art layer.

C/P Element 93 on to the canvas.  Re size it once.  Place it on the right side and behind the other elements.

C/P Element 96 on to the canvas.  Re size it twice.  Place it on the left side of the word art.


Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Wednesday, April 13, 2016

Spring Extravaganza




Kit:  Spring Extravaganza by Mysterfeerie Creation.  Can be found at 


Roses Are Blue

Roses Are Blue
©Barbara Butler
April 2016



Supplies:
Kit:  Roses Are Blue by Amy Marie.  This kit can be found at the following stores 
 Mask:  WSL85  
Special Instructions:  All Elements will be re sized by 75% unless otherwise stated.

New Image 800x600 72DPI.

Select all, Paste Pp7 into the selection, select none.  Apply the mask and merge group.

C/P Element 38 on to the canvas.  Re size it once.  Select all, float, deflate.  Add a new layer and paste Pp8 into the selection change the blend mode to Multiply, select none.  Click on the inside of the frame expand by 5, add a new layer and paste Pp7 into the selection, select none.  Move the paper layer below both frame layers.

C/P Element 4 on to the canvas.  Re size it twice.  Place it on the top left and in front of the frame.

C/P Element 19 on to the canvas.  Flip it horizontally and place it on the top left below Element 74.

C/P Element 30 on to the canvas.  Re size it three times.  Place it on the bottom left and in front of the frame.

C/P Elemengt 58 on to the canvas.  Re size it once.  Place it behind the other on the bottom and center it.  Add a gradient glow of choice I used #828d65 for the color.

C/P Element 62 on to the canvas.  Re size it twice.  Flip it horizontally and place it on the right side.  Duplicate it and move the duplicate up just a little bit.  Rotate this one by 15 degrees to the left.

C/P Element 71 on to the canvas.  Re size it by 55% twice.  Place it on the bottom left and in front of the other elements.  Duplicate it and move this one over to the right side.

C/P Element 82 on to the canvas.  Place it above the second paper layer and just below the frames.  Now on the paper layer Select all, float, deflate.  Invert the selection and back on the Element hit the delete key to get rid of the stuff on the outside of the frames.  Select none.


Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I'm using the tube that came with the kit but feel free to use any tube you like.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, April 11, 2016

Roses Are Pink

Roses Are Pink
©Barbara Butler
April 11, 2016



Supplies:
Kit:  Roses Are Pink by Amy Marie.  This kit can be found at the following stores 
Template:  624 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright re size the canvas to a little bit bigger size. 

Papers:
Layer 1:  Select all, float, deflate.  Paste Pp18 into the selection, select none.  Repeat for Layer 2.

Layer 3:  Select all, float, deflate.  Paste Pp17 into the selection, select none.

Layer 4:  Select all, float, deflate.  Paste Pp24 into the selection, select none.

Layer 5:  Select all, float, deflate.  Paste Pp20 into the selection, select none.

Delete Layer 6.

Layer 7:  Select all, float, deflate.  Paste Pp21 into the selection, select none.

Word Art Layers 8-11:  Merge them all together, select all, float, deflate.  Paste Pp12 into the selection and select none.  Place it on the bottom and center it.

Elements:  All elements will be re sized by 75% unless otherwised stated.  

Element 6:  C/P on to the canvas.  Re size it once.  Rotate it 30 degrees to the right and place it on the right side.

Element 28:  C/P on to the canvas.  Place it on the bottom left and behind the word art layer.

Element 37:  C/P on to the canvas.  Re size it once.  Place it on the right side and behind Element 6.

Element 40:  C/P on to the canvas.  Place it on the left side and behind the other elements.  Move Layer 7 over to the right and behind Elements 6&37.

Element 50:  C/P on to the canvas.  Re size it once.  Place it on the top left and in front of the other elements.

Element 84:  C/P on to the canvas.  Re size it once.  Rotate it 30 degrees to the right and place it behind the elements on the right side.

Element 125:  C/P on to the canvas.  Re size it three times.  Flip it horizontally and place it in front of the other elements on the left side.


Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  Depending on the tube you choose you might have to move a few things around.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Saturday, April 9, 2016

Mila




Tube:  Mila by Always Smiling.  Can be found at 


Oceans Apart



Kit:  Oceans Apart by Daelmans Designs.  Can be found at 




Spring Magic

Spring Magic
©Barbara Butler
April 2016



Supplies:
Kit:  Spring Magic by Amy Marie.  This kit can be found at the following stores 
 Template:  565 by Millies PSP Madness
Tube:  I used the tube that came with the kit.
Font:  Flemish Script can be found Here 

Special Settings:
Drop Shadow:  V&H:  2 Opacity: 92 Blur: 9 Color:  #171717

Open up the template and check to make sure it is at 72DPI.  Duplicate and close the original.  Re size the canvas to a little bit bigger size so the the elements will fit properly.

Papers:
Layer 1:  Select all, float, defloat.  Paste Pp19 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this for Layer 2.

Layer 3:  Select all, float, defloat.  Paste Pp15 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this for Layer 4.

Delete Layer 5.

Layer 6:  Select all, float, defloat.  Paste Pp14 into the selection, select none.  Repeat for Layer 7.

Layer 8:  Select all, float, defloat.  Paste Pp6 into the selection, select none.  Repeat for Layer 9.

Layer 10:  Select all, float, deflate.  Paste Pp5 into the selection, select none.

Layer 11:  Select all, float, deflate.  Paste Pp4 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Elements:  Most elements will be re sized by 75% unless stated otherwised.  See my tag for proper placement.

Element 6:  C/P on to the canvas.  Re size it and place it in the middle

Element 8:  C/P on to the canvas.  Re size it twice.  Place on the bottom right and behind the word art layer.

Element 12:  C/P on to the canvas.  Re size it once and place it in the top left corner.  Add a drop shadow using the settings above.  

Element 11:  C/P on to the canvas.  Re size it three times.  Place it top of Element 12.

Element 24:  C/P on to the canvas.  Re size it and place it on the bottom left.

Element 39:  C/P on to the canvas.  Place it on the bottom right and behind the other elements.

Element 52:  C/P on to the canvas.  Re size it four times.  Rotate it 15 degrees to the left and place it on the top right and in front of the other elements.

Element 64:  C/P on to the canvas.  Re size it once place it on the bottom and behind the other elements (except Element 6).  Take the eraser tool and erase any part that is over Element 6.

Element 68:  C/P on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

Add a drop shadow to some of the elements using the settings up above.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.