Pages

Thursday, September 29, 2016

Witchy Times

Witchy Times
©Barbara Butler
September 2016



Supplies:
Kit:  Witchy Times by Amy Marie.  This kit can be found at 
 Mask:  Haunted House by Kat4EVR.  This mask can be found over on the Creative Misfits Blog.
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

New Image 960X720 72DPI.  

Select all, paste Pp9 into the selection, select none.  Apply the mask and merge the group.  Duplicate it and merge the two together.

C/P Element 13 on to the canvas.  Re size it once.  Place it on the right side.

C/P Element 25 on to the canvas.  Place it on the top and add a gradient glow and drop shadow of choice.

C/P Element 27 on to the canvas.  Place it on the top left.

C/P Element 68 on to the canvas.  Re size it three times.  Place it on the bottom left.

C/P Element 71 on to the canvas.  Re size it once.  Place it on the left side and behind the cat.

C/P Element 103 on to the canvas.  Place it in the middle and behind the other elements.

C/P Element 59 on to the canvas.  Leave it right where it is.

C/P Element 38 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

C/P Element 23 on to the canvas.  Re size it once.  Place it where you would like, I put mine over to the right a little bit and behind Element 25.

C/P Element 7 on to the canvas.  Re size it four times.  Place it to the right and in front of Element 25.  Rotate it 15 degrees to the right.

C/P Element 15 on to the canvas.  Re size it twice.  Place it on the top right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I am using the tube that comes with this kit.  Re size it twice.  Flip it horizontally and place it beside the tree so it looks like she is standing against it.

C/P Element 32 on to the canvas.  Re size it four times.  Place it in front of the tube.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, September 26, 2016

Spooky Friends

Spooky Friends
©Barbara Butler
September 2016



Supplies:
Kit:  Spooky Friends 2016 by Amy Marie.  This kit can be found at 

Mask:  WSL 194
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

New Image 800X600 72DPI.  

Select all, paste Pp8 into the selection, select none.  Apply the mask and merge the group.  Select all, float, defloat, add a new layer, paste Pp6 into the selection, change the blend mode to Multiply and select none.

C/P Element 5 on to the canvas.  Re size it three times.  Place it on the left side.

C/P Element 11 on to the canvas.  Re size it once.  Place it on the left side and behind Element 5.

C/P Element 25 on to the canvas.  Re size it once.  Place it on the right side and place it behind the other elements.

C/P Element 42 on to the canvas.  Re size it twice.  Place it on the bottom and in front of the other elements.

C/P Element 75 on to the canvas.  Re size it three times.  Place it on the right side of Element 42.

C/P Element 83 on to the canvas.  Re size it once.  Flip it horizontally and place it to the left and behind Element 42.

C/P Element 39 on to the canvas.  Place it on the right side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I used a couple that come with the kit and re sized a few times.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sunday, September 25, 2016

Thursday, September 22, 2016

Halloween Spells

Halloween Spells
©Barbara Butler
September 2016



Supplies:
Kit:  Halloween Spells by Amy Marie.  This kit can be found at 

Mask:  Moon by Me.  You can fine this mask Here 
Special Settings:  Most Elements will be re sized by 65% unless otherwised stated.

New Image 960X720 72DPI.  Open up the mask

Select all, paste Pp24 into the selection, select none.  Apply the mask and merge the mask group.  Duplicate it and merge the two together.

C/P Element 2 on to the canvas.  Place it on the left side.

C/P Element 14 on to the canvas.  Re size it once.  Flip it horizontally and place it on the right side.

C/P Elemengt 49 on to the canvas.  Re size it once.  Place it on the left side and behind gthe other elements.

C/P Element 58 on to the canvas.  Re size it three times.  Place it on the left side and in front of the other elements.

C/P Element 75 on to the canvas.  Re size it once.  Place it on the left side and behind Element 58.

C/P Element 80 on to the canvas.  Re size it once.  Place it on the left and in front of the other elements.

C/P Element 81 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 100 on to the canvas.  Place it on the right side and behind the other elements.  Duplicate it and flip horizontally but leave it right where it is.

C/P Element 118 on to the canvas.  Place it on the bottom and in front of the other elements.  Try to center it.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Wednesday, September 21, 2016

Amy Marie Sales and New Template

I have a New Template up.  


You can fine the template 

Here is a tag I made using this template.  I used the wonderful kit Cammie's Autumn by Amy Marie and you can fine the kit Here.  She's having a sale right now Tagger Kits are .74 and Clusters are .99.


Monday, September 19, 2016

Trick or Treat Girl




Scrap Kit:  Trick or Treat Girl by Whisper In The Wind.  This kit can be found at the following store(s)



Blood Red

Blood Red
©Barbara Butler
September 2016



Supplies:
Kit:  Blood Red by Amy Marie.  This kit can be found at 
Mask:  WSL84
Effects:  Xero Fritillary
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

New Image 960X720 72DP

C/P Element 105 on to the canvas.  Center it.

C/P Element 114 on to the canvas.  Re size it once.  Place it behind Element 105.  Click on the inside with the magic wand, Expand by 5, paste Pp8 as a new layer, invert the selection and hit the delete key, select none.  Move the paper layer below the frame.

C/P Element 21 on to the canvas.  Re size it three times.  Place it on the bottom left and in front of everything else.

C/P Element 35 on to the canvas.  Place it behind the other elements and move it towards the left so it is showing behind the frame.  Duplicate it, flip horizontally and place on the right side.

C/P Element 52 on to the canvas.  Re size it once.  Place it on the bottom and in front of the other elements, center it.  Add a gradient glow with the following color #e4dccc.  

C/P Element 80 on to the canvas.  Re size it three times.  Place it on the bottom left and in front of the other elements.

C/P Element 90 on to the canvas.  Re size it twice.  Place it on the bottom right and behind Element 52.

C/P Element 121 on to the canvas.  Place it on the left side and behind the other elements.  Duplicate it, flip horizontally and place it on the right side.

C/P Paper 14 on to the canvas.  Apply Fritillary with the following settings:  Granularity 25, Aggression 30, Tesselation 100, Variation 88.  

C/P Element 17 on to the canvas.  Re size it three times.  Place it on the top right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I am using the tube that comes in the kit.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tuesday, September 13, 2016

Colors of Autumn






Scrap Kit:  Colors of Autumn  by Whisper In The Wind.  This kit can be found at the following store(s)



Cammies Autumn

Cammies Autumn
©Barbara Butler
September 2016



Supplies:
Kit:  Cammies Autumn by Amy Marie.  This kit can be found at 
Template:  Waiting For Fall by Sarah.  This template can be found at www.sarahstagsthings.blogspot.com
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

PAPERS:

Raster 5:  Select all, float, defloat.  Paste Pp2 into the selection, select none.  Repeat for Copy of Vector 1.

Raster 4:  Select all, float, defloat.  Paste Pp1 into the selection, select none.  

Raster 6:  Select all, float, defloat.  Paste Pp3 into the selection, select none.  Repeat for Copy of Raster 6.

Raster 2:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

Raste 10:  Select all, float, defloat.  Add a new layer and flood fill with a gradient of choice, I chose a dark and light brown from my tag.  Repeat for Raster 11.  Delete the original layers.

Raster 3:  Using the manual color changer and change the color to a color of choice.

ELEMENTS:

C/P Element 5 on to the canvas.  Re size it once.  Place it on the left side and rotate it 15 degrees to the left.

C/P Element 7 on to the canvas.  Flip it horizontally and place it on the right side.

C/P Element 19 on to the canvas.  Place it on the right side and behind Element 7.

C/P Element 28 on to the canvas.  Re size it twice.  Rotate it 15 degrees to the right and place it on the bottom left.

C/P Elemengt 48 on to the canvas.  Re size it once.  Place it on the left side and rotate it 15 degrees to the right.

C/P Element 49 on to the canvas.  Place it on the top left and behind the other elements.

C/P Element 53 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 58 on to the canvas.  Re size it twice.  Place it on the top right and rotate it 15 degrees to the left.

C/P Element 62 on to the canvas.  Re size it twice.  Place it on the bottom right.

C/P Element 68 on to the canvas.  Re size it three times.  Place it on the bottom left and in front of the other elements.

C/P Element 83 on to the canvas.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sunday, September 11, 2016

Friday, September 9, 2016

Dark Lil

Dark Lil
©Barbara Butler
September 2016



Supplies:
Kit:  Dark Lil by Amy Marie.  This kit can be found at 
Template:  674 by Millies PSPMadness
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and word art layers.

PAPERS:

Layer 3:  Select  all, float, defloat.  Paste Pp8 into the selection, select none.  Repeat for Layer 4.

Layer 1:  Select all, float, defloat.  Paste Pp17 into the selection, select none.  Repeat for Layer 2.

Layers 10-13:  Move Layer 12 so it is above Layer 10 and Move 13 so it is above Layer 11.  On the new Layers select all, float, defloat.  Paste Pp16 into the selection, select none.

Layer 9:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Layer 5:  Select all, float, defloat.  Paste Pp12 into the selection, select none.  Repeat for Layer 6.


ELEMENTS:

C/P Element 1 on to the canvas.  Re size it twice.  Place it on the bottom left and rotate it 15 degrees to the right.

C/P Element 4 on to the canvas.  Re size it once.  Place on the bottom and center it.

C/P Element 5 on to the canvas.  Re size it once.  Place it on the top right and rotate it 15 degrees to the right.

C/P Element 6 on to the canvas.  Re size it twice.  Place it on the top left.

C/P Element 10 on to the canvas.  Place it on the bottom right and behind the other elements.

C/P Element 27 on to the canvas.  Re size it three times.  Place it on the bottom right and behind the other elements except Element 10.

C/P Element 29 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 51 on to the canvas.  Place it on the bottom left and behind the other elements.  Add a drop shadow with a light color from the tag.

C/P Element 90 on to the canvas.  Leave it right where it is at but behind the other elements.  

C/P Element 101 on to the canvas.  Place it on the right side and behind the other elements.  Duplicate it, flip horizontally and place it on the left side.

C/P Element 114 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements (see my tag for proper placement).  Duplicate it, flip it horizontally and place it on the right side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I am using the tube that came with the kit.  I re sized it once and placed it on the right side and made it look like it was sitting Element 101.  Then I duplicated it, flipped this one horizontally and placed it on the left side.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Thursday, September 8, 2016