Pages

Wednesday, August 31, 2016

Thursday, August 25, 2016

Simone

Simone
©Barbara Butler
August 2016



Supplies:
Kit:  Simone.  This kit can be found at 
 Mask:  WSL194
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

New Image 960X720 72DPI

Select all, paste Pp1 into the selection, select none.  Apply the mask and merge group.

C/P Element 97 on to the canvas.  Place it in the center of the canvas.

C/P Element 105 on to the canvas.  Re size it twice.  Place it on the top right.

C/P Element 97 on to the canvas.  Re size once.  Place it on the bottom right and behind Element 97.

C/P Element 65 on to the canvas.  Re size it three times.  Place it on the bottom left and in front of the other elements.

C/P Element 26 on to the canvas.  Re size it once.  Flip it horizontally, rotate it 15 degrees to the left and place it behind Element 65 on the bottom left.

C/P Element 53 on to the canvas.  Re size it three times.  Flip it horizontally and place it in front of the other elements on the bottom right.

C/P Element 106 on to the canvas.  Place it on the top left and behind the other elements.  Duplicate it and move it to the right just a little bit.

C/P Element 16 on to the canvas.  Rotate it 15 degrees to the right and place it behind the elements on the right side (except the moon).

C/P Element 35 on to the canvas.  Place it on the bottom left and behind all of the other elements.  Duplicate it, flip it horizontally and place this one on the bottom right.

C/P Element 48 on to the canvas.  Place it on the bottom left and in front of the house.  Duplicate it, flip it horizontally and place it on the right side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I used the tube that came with the kit and re sized it twice.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, August 22, 2016

Autumn Is Coming




Kit:  Autumn Is Coming by Daelmans Designs.  Can be found at Digi Divas 

A Touch Of Autumn

A Touch Of Autumn
©Barbara Butler
August 2016



Supplies:
Kit:  A Touch of Autumn.  This kit can be found at 
Template:  Template 15 by Sandra and can be found at http://sandrasslammintutorials.blogspot.ie/
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size.

PAPERS:

Circle:  Select all, float, defloat.  Paste Pp7 into the selection, select none.

Hot Pink Rectangles:  Select all, float, defloat.  Paste Pp8 into the selection, select none. 

Purple Square:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

Pink Circles:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Light Pink Rectangles:  Select all, float, defloat.  Paste PP16 into the selection, select none.

Outlines:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

ELEMENTS:

C/P Element 12 on to the canvas.  Re size it once.  Place it on the top left.  Duplicate it and merge the two together.  Duplicate it once more time, re size the duplicate once and place to the left of the original.

C/P Element 38 on to the canvas.  Place it on the bottom left.  Duplicate it, flip it horizontally and place this one on the bottom right.

C/P Element 41 on to the canvas.  Re size it twice.  Place it on the bottom right and in front of the other elements.

C/P Element 39 on to the canvas.  Re size it twice.  Place it to the left of Element 41.

C/P Element 44 on to the canvas.  Re size it  twice.  Flip it horizontally and place it in front of the elements on the bottom left.

C/P Element 54 on to the canvas.  Re size it once.  Place it on the bottom right and behind Elements 39 and 41.

C/P Element 85 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 89 on to the canvas.  Place it on the bottom and behind the other elements except Element 38.

C/P Element 95 on to the canvas.  Re size it twice.  Flip it horizontally and place it on the bottom right and in front of the other elements.

C/P Element 35 on to the canvas.  Re size it twice.  Rotate it 15 degrees to the right and place it on the top right. 

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Wednesday, August 17, 2016

Lexis Halloween

Lexi's Halloween
©Barbara Butler
August 2016




Supplies:
Kit:  Lexis Halloween Collection by Amy Marie.  This kit can be found at 
Template 674 by Millies PSP Madness
Special Settings:  Most Elements will be re sized by 75% unless other  wised stated.
SPECIAL NOTE:  THIS IS A MIX AND MATCH KIT.  I'M GOING TO BE USING ELEMENTS FROM BOTH KITS.  ONE KIT IS LEXI, THE OTHER IS LEXI'S HALLOWEEN COLLECTION.  THEN NAME OF THE KIT EACH COMES FROM WILL BE PARENTHESES.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer, and re size the canvas.

PAPERS:

Layer 9:  Select all, float, defloat.  Paste Pp2(Lexis Halloween) into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp1(Lexi) into the selection, select none.  Repeat for Layer 4.

Layer 1:  Select all, float, defloat.  Paste Pp6(Lexis Halloween) into the selection, select none.  Repeat for Layer 2.

Layer 15:  Select all, float, defloat.  Paste Pp8(Lexi) into the selection, select none.

Layer 14:  Select all, float, defloat.  Paste Pp10(Lexi) into the selection,  select none.

Layer 10:  Select all, float, defloat.  Paste Pp6(Lexi) into the selection, select none.  Repeat for Layers 11-13.

ELEMENTS:  Most of these will becoming from Lexis Halloween Kit unless other wised stated.

C/P Element 2 on to the canvas.  Re size it once.  Place it on the left side.

C/P Element 3 on to the canvas.  Re size it three times.  Rotate it 15 degrees to the right and place it on the top right.

C/P Element 5 on to the canvas.  Place it on the bottom right and behind the word art layers.

C/P Element 11 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 17 on to the canvas.  Re size it three times.  Flip it horizontally and place it on the bottom  left and in front of the othe elements.

C/P Element 14 on to the canvas.  Re size it once.  Place it on the bottom right and in front of the other elements.

C/P Element 18 on to the canvas.  Re size it four times.  Flip it horizontally and place it on the top left.

C/P Element 28 on to the canvas.  Re size it once.  Place it on the bottom right and behind Element 18.

C/P Element 15(Lexi) on to the canvas.  Re size it twice.  Place it on the bottom left and behind the other elements.

C/P Element 20(Lexi) on to the canvas.  Re size it four times.  Place it on the bottom right and in front of the other elements.

C/P Element 21(Lexi) on to the canvas.  Re size it three times.  Place it to right of Element 20.

C/P Element 52(Lexi) on to the canvas.  Place it on the left side.

C/P Element 51(Lexi) on to the canvas.  Place it where you would like.  I duplicated mine a couple of times and merged them together before placing.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sheena





Tube:  Sheena by Ishika Chowdhury  .  Can be found at Digi Divas 

Thursday, August 11, 2016

Falling In Love

Falling In Love
©Barbara Butler
August 2016



Supplies:
Kit:  Falling In Love by Amy Marie.  This kit can be found at 
Template:  789 by Millies PSPMadness
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

PAPERS:

Layer 2:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

Layer 6:  Select all, float, defloat.  Paste Pp17 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

Layer 5:  Select all, float, defloat.  Paste Pp15 into the selection, select none.

Layers 3, 7 and 8:  Select all, float, defloat.  Paste Pp19 into the selection, select none.  Apply a gradient glow and drop shadow of choice.  Merge the Word Art Layers 7&8 together.

ELEMENTS:

C/P Element 1 on to the canvas.  Re size it twice.  Rotate it 15 degrees to the right and place it on the top right.  Add a drop shadow of choice.

C/P Element 5 on to the canvas.  Re size it twice.  Rotate it 15 degrees to the left and place it on the bottom left and behind the word art.

C/P Element 11 on to the canvas.  Re size it twice.  Rotate it 15 degrees to the right and place it on the bottom right and behind the word art.

C/P Element 34 on to the canvas.  Re size it twice.  Place it on the bottom and behind the word art.

C/P Element 40 on to the canvas.  Re size it three times.  Flip it horizontally and place it on the bottom left and behind the word art.

C/P Element 54 on to the canvas.  Re size it four times.  Place it on the bottom left and in front of the other elements.

C/P Element 59 on to the canvas.  Re size it three times.  Place it on towards the left and behind Element 40.

C/P Element 67 on to the canvas.  Place it on the top left.  Duplicate it and place this one towards the bottom right of the original.  Merge the two together.  Change the blend mode to lighten and the opacity to 71.

C/P Element 79 on to the canvas.  Place it on the bottom right and behind the other elements.  Duplicate it and move this one over to the bottom left.

C/P Element 88 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

C/P Element 50 on to the canvas.  Place it towards the left and behind the other elements.  Duplicate it, re size the duplicate it once and place it towards the right and behind the other elements.  Add a drop shadow of choice to both the original and duplicate.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Fall Fashion






Scrap Kit:   Fall Fashion by Whisper In The Wind.  This kit can be found at the following store(s)


Exciting



Kit:  Exciting By Bella Caribena.  Can be found at Digi Divas 

Wednesday, August 10, 2016

Autumn Fairy

Autumn Fairy
©Barbara Butler
August 2016



Supplies:
Kit:  Autumn Fairy Mini by Amy Marie.  This kit can be found at 
Template:  I Love Autumn by Dee.
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and font info layers.  Re size the canvas.

PAPERS:

Yellow Rectangles:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

Red Heart:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Orange Circle:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

Small Creme Rectangles:  Select all, float, defloat.  Paste Pp3 into the selection, select none.  Repeat for Pink Oval.

Creme Oval:  Select all, float, defloat.  Paste Pp7 into the selection, select none.  Repeat for Creme Heart.

Orange Rectangle:  Select all, float, defloat.  Paste Pp6 into the selection, select none.  

Delete the Word Art Layers.

ELEMENTS:

C/P Element 3 on to the canvas.  Place it on the left side.

C/P Element 8 on to the canvas.  Place it on the left side and behind Element 3.

C/P Element 15 on to the canvas.  Re size it twice.  Place it on the bottom right.

C/P Element 21 on to the canvas.  Re size it twice.  Place it on the bottom right and in front of the other elements.

C/P Element 31 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 37 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

C/P Element 42 on to the canvas.  Re size it once.  Place it on the bottom left and behind the other elements.

C/P Element 22 on to the canvas.  Re size it once.  Place it on the bottom left and in front of the other elements.

C/P Element 1 on to the canvas.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

The Beauty of Fall




Scrap Kit:   The Beauty of Fall by Whisper In The Wind.  This kit can be found at the following store(s)


Monday, August 8, 2016

Apple of My Eye

Apple of My Eye
©Barbara Butler
August 2016



Supplies:
Kit:  Apple of My Eye by Amy Marie.  This kit can be found at 
Template:  Cascade by DeeDesign
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

PAPERS:

Yellow Square:  Select all, float, defloat.  Paste Pp8 into the selection, select none.  Repeat for the Orange Circle.

Large White Circle:  Select all, float, defloat.  Paste Pp3 into the selection, select none.  Repeat for the Small White Circle and White Rectangles.

Pink Circle:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Red Rectangle:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

Word Art Layers:  Flood Fill the White Layers with a dark red color from the tag.

ELEMENTS:

C/P Element 4 on to the canvas.  Re size it once.  Place it on the left side.

C/P Element 8 on to the canvas.  Place it on the left side and behind Element 4.

C/P Element 12 on to the canvas.  Re size it three times.  Place it on the bottom and in front of the other elements.

C/P Eelement 22 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 18 on to the canvas.  Re size it once.  Place it on the bottom right and behind the other elements.

C/P Element 24 on to the canvas.  Re size it twice.  Place it on the bottom right and in front of the other elements.

C/P Element 30 on to the canvas.  Re size it twice.  Place it on the bottom left and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Thursday, August 4, 2016

Autumn Days

Autumn Days
©Barbara Butler
August 2016



Supplies:
Kit:  Autumn Days by Amy Marie.  This kit can be found at 
Template:  Fall Foilage
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and font info layers.  Re size the canvas.

PAPERS:

Orange Squares:  Select all, float, defloat.  Paste Pp6 into the selection, select none.

Orange Rectangles:  Select all, float, defloat.  Paste Pp9 into the selection, select none.

Red Circle:  Select all, float, defloat.  Paste Pp7 into the selection, select none.  Repeat for the Pink Circles.

Yellow Rectangle:  Select all, float, defloat.  Paste Pp10 into the selection, select none.

Red Rectangle:  Select all, float, defloat.  Paste Pp8 into the selecgtion, select none.  Repeat for the Red Squares.

White Squares:  Select all, float, defloat.  Paste Pp5 into the selection, select none.  Repeat for the 3 White Squares.

Word Art Layers:  Flood Fill the Bouquet of Passion layer with a color of choice, I used a yellow color.  And using the manual color changer change the Fall Foilage to a color of choice.

ELEMENTS:

C/P Element 6 on to the canvas.  Place it on the bottom left.

C/P Element 3 on to the canvas.  Place it on the right side.

C/P Element 29 on to the canvas.  Re size it three times.  Place it on the left side.

C/P Element 31 on to the canvas.  Re size it twice.  Place it on the bottom right.

C/P Element 50 on to the canvas.  Re size it once.  Place it on the left side.

C/P Element 59 on to the canvas.  Re size it once.  Place it on the left side and behind the other elements.

C/P Element 74 on to the canvas.  Place it on the bottom right and behind the other elements.  Duplicate it, flip horizontally and place on the left side.

C/P Element 83 on to the canvas.  Re size it four times.  Place it on the bottom right and in front of the other elements.

C/P Element 85 on to the canvas.  Re size it once.  Rotate it 15 degrees to the right.  Place it on the right side and behind the other elements except Element 3.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, August 1, 2016

Vintage Grapes

Vintage Grapes
©Barbara Butler
August 2016



Supplies:
Kit:  Vintage Grapes  by Amy Marie.  This kit can be found at 
Special Settings:  Most Elements will be re sized by 75% unless otherwised stated.

New Image 960X720 72DPI.

C/P Element 61 on to the canvas.  Leave it right where it is at.

C/P Element 62 on to the canvas.  Re size it once.  Leave it right where it is at.  Click on the inside Expand the selection, paste Pp12 as a new layer, invert the selection and hit the delete key, select none.  Place below both frames.

C/P Element 32 on to the canvas.  Re size it three times.  Place it on the top left of Element 62.

C/P Element 40 on to the canvas.  Re size it twice.  Place it on the bottom right.

C/P Element 47 on to the canvas.  Re size it once.  Place it on the right side and in front of the other elements.

C/P Element 57 on to the canvas.  Re size it three times.  Place it on the bottom left.

C/P Element 66 on to the canvas.  Re size it twice.  Place it on the bottom left and behind Element 57.

C/P Element 83 on to the canvas.  Re size it three times.  Place it on the bottom right and in front of the other elements.

C/P Element 91 on to the canvas.  Re size it once.  Place it on the bottom left and behind the other elements.

C/P Element 92 on to the canvas.  Re size it once.  Place it on tne bottom and behind the other elements.\

C/P Element 87 on to the canvas.  Re size it three times.  Place it on the top right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.