White Fantasy

White Fantasy
©Barbara Butler
April 2015

Supplies:
Kit:  White Fantasy by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template/Mask-

New Image 800X600 72 DPI

C/P Element 110 on to the canvas.  Duplicate it and move the duplicate up just a little bit.  Merge the two together.

C/P Element 118 on to the canvas.  Re size it by 65% twice.  Place it on the right side.  Duplicate it and move the duplicate to the left side.

C/P Element 127 on to the canvas.  Re size it twice once by 50% then by 75%.  Place it on the left side and in front of the other elements.

C/P Element 130 on to the canvas.  Re size it twice, once by 50% then by 75%. 

C/P Element 126 on to the canvas.  Re size it by 65% three times.  Place it on the right side and in front of the other elements.

C/P Element 109 on to the canvas.  Re size it by 50% once.  Place it on the right side and behind Element 118.

C/P Element 81 on to the canvas.  Re size it twice, once by 50% then by 75%.  Place it on the left side and behind Element 118.

C/P Element 70 on to the canvas.  Re size it twice, once by 50% then by 75%.  Place it on the left side and in front of the other elements.

C/P Element 36 on to the canvas.  Re size it by 50% twice.  Flip it horizontally and place it in front of the elements on the right side.

C/P Element 132 on to the canvas.  Re size it twice, once by 50% then by 75%.  Place it in the center of the canvas and behind Element 130.

C/P Element 90 on to the canvas.  Re size it by 75% twice.  Place it on the top left and behind Element 70.

C/P Element 24 on to the canvas.  Re size it by 45% once.  Place it on the top left and in front of the other elements.  Rotate it 15 degrees to the right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Mermaid Tales

Mermaid Tales
©Barbara Butler
April 2015

Supplies:
Kit:  Mermaid Fairyland by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL194

New Image 800X600 72DPI

Select all and paste Pp3 into the selection, select none.  Apply the mask and merge the group.

C/P Element 4 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Elements 12-14 on to the canvas.  Re size one by 65% once, then the other two by 65% twice.  Place them on the bottom right with the biggest one behind the other two.

C/P Element 17 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it behind the elements on the right side.

C/P Element 35 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the starfish.

C/P Element 38 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 48 on to the canvas.  Place it on the left side and in front of Element 38.

C/P Element 51 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 69 on to the canvas.  Re size it by 75% once.  Place it on the top right and behind the other elements.

C/P Element 134 on to the canvas.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Spring Awakening

Spring Awakening
©Barbara Butler
April 2015

Supplies:
Kit:  Spring Awakening by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL 84

New Image 800X600 72DPI

Select all, paste Pp10 into the selection, select none.  Apply the mask and merge the group.

C/P Element 70 on to the canvas. 

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 7 on to the canvas.  Rotate it 5 degrees to the left and place it on the left side and behind the other elements.

C/P Element 13 on to the canvas.  Re size it by 65% once.  Place it on the top right.

C/P Element 16 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and in front of the other elements.

C/P Element 27 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 46 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind Element 3.

C/P Element 63 on to the canvas.  Place it behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Suzy

Suzie
©Barbara Butler
April 2015

Supplies:
Kit:  Suzy Strawberry by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL 84

New Image 800X600 72DPI

Select all, paste Pp10 into the selection, select none.  Apply the mask and merge the group.

C/P Element 2 on to the canvas.  Re size it by 75% once.  Place it on the left side and rotate it 15 degrees to the left.

C/P Element 9 on to the canvas.  Place it on the left side and behind Element 2.

C/P Element 21 on to the canvas.  Re size it by 75% once.  Place it on the left side and between Elements 2&9.

C/P Element 115 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 35 on to the canvas.  Re size it by 75% three times.  Place it on the right side and in front of Element 115.

C/P Element 97 on to the canvas.  Re size it by 75% twice.  Place it on the left side and in front of the other elements.

C/P Element 99 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements.

C/P Element 116 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 123 on to the canvas.  Re size it by 50% twice.  Place it on the right side and in front of the other elements.

C/P Element 134 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 128 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the left and on top of the rose so it looks like it is going to land on it.

C/P Element 127 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 111 on to the canvas.  Place it on the right side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Super E

Super E
©Barbara Butler
April 2015

Supplies:
Kit:  Super E by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template/Mask-

C/P Element 91 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand, expand the selection by 3 (you expand it to a bigger or smaller area), add a new layer and paste Pp1 into the selection, selec none.  Move the paper layer below the frame.

C/P Element 93 on to the canvas.  Re size it by 75% three times.  Place it on the bottom left.

C/P Element 86 on to the canvas.  Re size it by 65% three times.  Place it on the bottom right.

C/P Element 84 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 81 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right and place it on the bottom right and behind Element 86.

C/P Element 76 on to the canvas.  Re size it by 65% twice.  Place it on the bottom and have the right side of it go behind the elements on the right side.

C/P Element 77 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right and place it in front of Element 84 on the top right.

C/P Element 75 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and behind the other elements.

C/P Element 27 on to the canvas.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Days Past 2015

Days Past
©Barbara Butler
April 2015

Supplies:
Kit:  Days Past by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD

New Image 900X700 72DPI.

C/P Element 2 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 3 on to the canvas.  Place it to the left and behind Element 2.

C/P Element 1 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it in front of the other elements on the left side.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 41 on to the canvas.  Place it behind the other elements.  Click on the inside with the magic wand, expand the selection by 6, add a new layer and paste Pp21 into the selection, select none.  Move the paper layer below the frame.

C/P Element 8 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the chair.

C/P Element 10 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

C/P Element 35 on to the canvas.  Re size it by 75% three times.  Place it on the bottom right and in front of the chair.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Summer Mint

Summer Mint
©Barbara Butler
April 2015

Supplies:
Kit:  Summer Mint by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Template:  584 by Millies PSP Madness.  You can fine the link to her site over on the side.


Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Re size the canvas to a bigger size for the elements later on.  Delete the copyright layer.

Paper Layers:  I hit the delete key before I paste the Papers into the selections that way there is none of the layer showing on the bottom of the paper.  But this step is up to you.

Layer 12:  Select all, float, deflate.  Paste Pp1 into the selection, select none.

Layers 10&11:  Select all, float, deflate.  Paste Pp8 into the selection, select none.

Layers 8&9:  Select all, float, deflate.  Paste Pp7 into the selection, select none.

Layer 7:  Select all, float, deflate.  Paste Pp10 into the selection, select none.

Layers 5&6:  Select all, float, deflate.  Paste Pp11 into the selection, select none.

Layers 3&4:  Select all, float, deflate.  Paste Pp19 into the selection, select none.

Layers 1&2:  Select all, float, deflate.  Paste Pp20 into the selection, select none.

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 4 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the bottom left.

C/P Element 9 on to the canvas.  Re size it by 75% three imes.  Place it on the top left of Layer 12.

C/P Element 10 on to the canvas.  Re size it by 75% once.  Place it on the bottom left and in front of Element 4.

C/P Element 15 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the top right.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind Element 3.

C/P Element 21 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and behind the other elements.

C/P Element 32 on to the canvas.  Re size it by 75% twice.  Place it on the left and on top of Element 4 (like it is sitting on top of it).

C/P Element 39 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind the other elements.

C/P Element 44 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it behind and to the right of the elements on the left side.

C/P Element 43 on to the canvas.  Re size it by 75% twice.  Place it on the top left and in front of the other elements.

C/P Element 83 on to the canvas.  Place it on the bottom and in front of all the other elements.  Add a gradient glow of choice, I used a dark brown from the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Moms

Moms
©Barbara Butler
April 2015

Supplies:
Kit:  Moms by Amy Marie.  This kit can be found at the following stores www.amymarieskits.com, PFD
Template:  Photo by Dee.  You can fine the link to her site on the side.
Mask:  WSL 194

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Re size the canvas to a bigger size and delete the copyright and word art layers.

Raster 7:  Select all, float, deflate.  Paste Pp2 into the selection, select none.  Apply the mask and merge the group.

Photo Tops:  Select all, float, deflate.  Paste Pp18 into the selection, select none.  Do this for all of the photo top layers (the dark gray layers).

Photo Bottoms:  Select all, float, deflate.  Paste Pp5 into the selection, select none.

C/P Element 2 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 8 on to the canvas.  Re size it by 65% three times.  Place it on the bottom left.

C/P Element 9 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 6 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom right.

C/P Element 16 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind Element 8.

C/P Element 18 on to the canvas.  Place it on the top left and behind the photo bottom.

C/P Element 28 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of Element 6.

C/P Element 62 on to the canvas.  Place it on the left side and behind everything else.

C/P Element 69 on to the canvas.  Re size it by 65% once.  Place it on the bottom and in front of everything else.

C/P Element 105 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the flowers.

C/P Element 46 on to the canvas.  Re size it by 65% once.  Place it on the bottom and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

A Mothers Love

A Mothers Love
©Barbara Butler
April 2015

Supplies:
Kit:  Mothers Day by Amy Marie.  This kit can be found at the following stores www.amymarieskits.com, PFD
Mask:  WSL 145

New Image 850X638 72DPI

Select all, paste Pp9 into the selection, select none.  Apply the mask and merge group.

C/P Element 5 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the left and place it on the left side.

C/P Element 12 on to the canvas.  Re size it by 75% once.  Place it on the left side and in front of Element 5.

C/P Element 26 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the right side.

C/P Element 11 on to the canvas.  Re size it by 75% three times.  Flip it horizontally and place it on the bottom right.

C/P Element 68 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the left side and behind the swan.

C/P Element 79 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the right and place it behind the elements on the right side.

C/P Element 98 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

C/P Element 112 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and behind Elements 26 and 11.

C/P Element 132 on to the canvas.  Re size it by 75% once.  Place it on the bottom and in front of the other elements.

Back on the paper layer, select all>selections, modify, select selections border, width 5, inside checked> add a new layer, flood fill with a shade of pink from the flower element on the bottom right, do this a couple of times.  Add a gradient glow with a light shade of green from the tag.  Add an in bevel with the following settings:  Bevel 2, width 10, Smoothness Depth and Ambience all set to 1, Shininess set 0, the rest set on default settings.

C/P Element 117 on to the canvas.  Re size it by 65% twice.  Place it on the left side between the dog and swan.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Seashells

Seashells
©Barbara Butler
April 2015

Supplies:
Kit:  Seashells by Amy Marie.  This kit can be found at the following stores www.amymarieskits.com, PFD
Mask:  WSL 194

New Image 800X600 72 DPI

Select all,  paste Pp6 into the selection, select none.  Apply the mask and merge the group.  Re size it by 85% once.

C/P Element 6 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.  Duplicate it and rotate the duplicate 15 degrees to the left.  Move this one just a little to the left of the original.

C/P Element 23 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 31 on to the canvas.  Re size it by 75% twice.  Place it on the top. 

C/P Element 51 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.  Rotate it 15 degrees to the left.

C/P Element 57 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind the hat.

C/P Element 65 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind the other elements.  Make sure some of it can be seen from the left side of the elements.

C/P Element 112 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C/P Element 32 on to the canvas.  Re size it by 45% twice.  Place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Lavender Dreams

Lavender Dreams
©Barbara Butler
April 2015

Supplies:
Kit:  Lavendar Dreams by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL 194

New Image 800X600 72DPI

Select all, paste Pp1 into the selection, select none.  Apply the mask and merge the group.

C/P Element 15 on to the canvas.  Re size it by 75% three times.  Flip it horizontally and place it on the left side.

 C/P Element 21 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind Element 15.

C/P Element 57 on to the canvas.  Re size it by 75% three times.  Place it on the right side.

C/P Element 90 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 104 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the left side on top of the suitcase.

C/P Element 63 on to the canvas.  Re size it by 65% three times.  Place it on the bottom left and in front of the other elements.

C/P Element 76 on to the canvas.  Re size it by 65% three times.  Place it on the bottom right and in front of the other elements.

C/P Element 95 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.
Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Laurel

 

I used the lovely Tube Laurel for these tags.  You can fine her here
 

Ladybug Summer

Ladybug Summer
©Barbara Butler
April 2015

Supplies:
Kit:  Ladybug Summmer by Amy Marie.  This kit can be found at the following stores www.amymarieskits.com, PFD
Mask:  WSL  95

New Image 800x600 72DPI.

Select all, paste Pp16 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 44 on to the canvas.  Place it on the bottom of the canvas.  Duplicate it a couple of times and move each duplicate up just a little bit.

C/P Element 83 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 82 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 62 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind Element 83.

C/P Element 47 on to the canvas.  Place it on towards the left and behind Element 62.

C/P Element 37 on to the canvas.  Place it on the bottom and behind all the other elements except the water.

C/P Element 21 on to the canvas.  Re size it by 65% twice, then one more time by 75%.  Flip it horizontally and place it on the left side and in front of the other elements.

C/P Element 35 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 75 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 9 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the bottom left and behind the chest.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tropical World

I used the kit Tropical World for these tags.  You can fine it here.

Sailing

 Sailing
©Barbara Butler
April 2015

Supplies:
Kit:  Blue Seas by Amy Marie.  This kit can be found at the following stores  Amy Marie, PFD

New Image 800X600 72DPI. 

C/P Element 121 on to the canvas.  Click on the inside with the magic wand, expand the selection by 4, add a new layer and paste Pp7 into the selection, select none.  Move the paper layer below the frame.

C/P Element 1 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 18 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 22 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the seahorse.

C/P Element 34 on to the canvas.  Re size it by 75% twice.  Place it on the bottom.

C/P Element 58 on to the canvas.  Re size it by 75% three times.  Place it on the bottom left and in front of the other elements.

C/P Element 65 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind the lighthouse.  Duplicate it and move it over to the right of the original.

C/P Element 112 on to the canvas.  Re size it by 75% four times.  Place it in the middle of the paper layer.

C/P Element 114 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 106 on to the canvas.  Re size it by 75% once.  Place it on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Side Note:  Depending on the tube you use you might have to re size and move some of the elements around just a little bit.  Like with the tube I used i had re size the boat by 75% once, and moved the bird over to the right.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Superfreak

Superfreak
©Barbara Butler
April 2015

Supplies:
Kit:  Kristina Superfreak by Amy Marie.  This kit can be found at the following stores www.amymarieskits.com, PFD
Template:  343 by Millies PSP Madness.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas so the elements will fit later on.

Layers 1&6:  Select all, float, deflate.  Paste Pp15 into the selection, select none.

Layers 2&3:  Select all, float, deflate.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 4:  Select all, float, deflate.  Paste Pp14 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layers 5&7:  Select all, float, deflate.  Paste Pp11 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layers 8&9:  Select all, float, deflate.  Paste Pp10 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

C/P Element 15 on to the canvas.  Re size by 75% twice.  Place it on the bottom left.

C/P Element 19 on to the canvas.  Re size it by 75% once.  Place it on the top left.

C/P Element 38 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 45 on to the canvas.  Re size it by 75% once.  Place it on the top right.

C/P Element 96 on to the canvas.  Re size it by 75% twice.  Rotate it 15 degrees to the right and place it on the bottom right.

C/P Element 28 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements.

C/P Element 1 on to the canvas.  Re size it by 65% twice.  Place it on the top left. 

C/P Element 77(this can be found in the Adult Toys Element Folder) on to the canvas.  Re size it by 50% once, then by 75%.  Place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  Depending on the tube you use you might have to re size the word art layer.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Alyssa

Alyssa
©Barbara Butler
April 2015

Supplies:
Kit:  Alyssa by Amy Marie.  This kit can be found at the following stores Amy Maries Kits, PFD, Scrapping Your Memories

Template:  541 by Millies PSP Madness

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size so the elements will fit properly.

Layers 7&9:  Select all, float, deflate.  Paste Pp11 into the selection, select none.

Layers 4&5:  Select all, float, deflate.  Paste Pp10 into the selection, select none.

Layers 3&6:  Select all, float, deflate.  Paste Pp4 into the selection, select none.

Layer 2:  Select all, float, deflate.  Paste Pp6 into the selection, select none.

Layer 1:  Select all, float, deflate.  Paste Pp16 into the selection, select none.

Layers 11&12:  Select all, float, deflate.  Paste Pp6 into the selection, select none.  Place the words inside the squares.

Layer 15:  Delete this layer.  Delete the heart layers as well.

C/P Element 3 on to the canvas.  Re size it by 75% once.  Place it on the bottom.

C/P Element 7 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the left and place it on the left side.

C/P Element 9 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 17 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 32 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 35 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements and the word art.

C/P Element 42 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 84 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 89 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 50 on to the canvas.  Re size it by 65% once.  Place it on the bottom and in front of the other elements except the key.

C/P Element 44 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Lemon N Lime

Lemon N Lime
©Barbara Butler
April 2015

Supplies:
Kit:  Lemon N Lime by Amy Marie.  This kit can be found at the following stores www.amymarieskits.com, PFD, Inzpired Creationz, Scrapping Your Memories
Template:  582 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas so the elements will fit later on.

Layer 6:  Select all, float, deflate.  Hit the delete key and paste Pp18 into the selection, select none.

Layers 9&10:  Select all, float, deflate.  Paste Pp8 into the selection, select none.

Layer 5:  Select all, float, deflate.  Paste Pp16 into the selection, select none.

Layers 3&4:  Select all, float, deflate.  Paste Pp15 into the selection, select none.

Layers 1&2:  Select all, float, deflate.  Past Pp20 into the selection, select none.

Layers 7&8:  Select all, float, deflate  Paste Pp14 into the selection, select none.

C/P Element 2 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 6 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind Element 2.

C/P Element 8 on to the canvas.  Re size it by 75% once.  Place it on the top right (see my tag for proper placement).

C/P Element 47 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 50 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind Element 47.

C/P Element 61 on to the canvas.  Place it on the bottom and behind the other elements.  Depending on the tube you use at the end you might want to duplicate this one, I duplicated it a couple of times and moved the duplicates so the cut off parts of her legs weren't visible.

C/P Element 66 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 80 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it behind the elements on the right side.

C/P Element 83 on to the canvas.  Re size it by 75% once.  Place it on the top left.

C/P Element 85 on to the canvas.  Place it on the right side and behind the other elements.  Add a drop shadow of choice.

C/P Element 97 on to the canvas.  Re size it by 75% twice.  Place it on the left side and top of the jar.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Anna

Anna
©Barbara Butler
April 2015

Supplies:
Kit:  Anna by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com,
PFD,  Inzpired Creationz,  Scrapping Your Memories

Template:  579 by Millies PSP Madness.

Open the template and check to make sure it is at 72 DPI.  Duplicate the template and close the original.  Delete the copyright and word art layers and re size the canvas to a little bit bigger size.

Layers 5&6:  Select all, float, deflate.  Paste Pp9 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 3:  Select all, float, deflate.  Paste Pp11 into the selection, select none.

Layers 1&2:  Select all, float, deflate.  Paste Pp5 into the selection, select none.

Layer 4:  Select all, float, deflate.  Paste Pp15 into the selection, select none.

C/P Element 6 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Element 9 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom right.

C/P Element 13 on to the canvas.  Place it on the bottom and behind the other elements.  Rotate it 45 degrees to the left.

C/P Element 14 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the bottles.

C/P Element 17 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and behind the other elements.

C/P Element 27 on to the canvas.  Rotate it 15 degrees to the left and place it behind the elements on the left side.

C/P Element 38 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements.

Open Element 87 and take your selection tool and draw rectangle around one of boards (I choose the top one but you can use either one), C/P it on to the canvas.  Re size it by 75% twice.  Place it on the top left. 

C/P Element 108 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements except the flowers.

C/P Element 131 on to the canvas.  Re size it by 65% twice.  Place it on top of the blanket.

C/P Element 21 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Steampunk Lady

I used the kit Steampunk Lady for these tags.  You can fine it here or Here.

Zaria

I used the lovely Tube Zaria for these tags.  You can fine her here

Garden Fantasy

Garden Fantasy
©Barbara Butler
April 2015

Supplies:
Kit:  Fantasy Garden by Amy Marie.  This kit can be found at the following stores www.amymarieskits.com, PFD, Inzpired Creationz, Scrapping Your Memories

New Image 800X600 72DPI.

C/P Element 68 on to the canvas.  Place it towards the bottom.

C/P Element 73 on to the canvas.  Place it behind Element 68.

C/P Element 72 on to the canvas.  Re size it by 85% once.  Place it on the right side and in front of Element 68.

C/P Element 65 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 61 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it behind the elements on the left side (except Element 65).  Try to blend the right side a little bit with Element 65 so it looks like one piece.

C/P Element 60 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the left side.

C/P Element 54 on to the canvas.  Place it on the left side and in front of the other elements.

C/P Element 57 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind Element 54.

C/P Element 40 on to the canvas.  Re size it by 75% once.   Place it behind the elements on the left side (see my tag for proper placement).

C/P Element 105 on to the canvas.  Re size it by 75% twice.  Place it on the right side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Spring Garden

I used the kit Spring Garden for these tags.  You can fine it here or here.

Bambi

I used the lovely Tube Bambi for these tags.  You can fine her here.

Spring Steam

Spring Steam
©Barbara Butler
April 2015

Supplies:
Kit:  Spring Steam by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com,
PFD,  Inzpired Creationz, Scrapping Your Memories
Mask:  WSL 194

New Image 800X600 72DPI

Select all, paste Pp11 into the selection, select none.  Apply the mask and merge the group.

C/P Element 105 on to the canvas twice.  Place one on the left side, flip the other one horizontally and place this one on the rigth side.

C/P Element 108 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind Element 105.

C/P Element 107 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 86 on to the canvas.  Place it behind the other elements.

C/P Element 78 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it in front of the elements on the left side.

C/P Element 65 on to the canvas.  Place it on the right side and behind the other elements except Element 86.

C/P Element 23 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind Element 78.

C/P Element 2 on to the canvas.  Leave it in the middle of the canvas, but place it behind Element 78.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Dark Romance

Dark Romance
©Barbara Butler
April 2015

Supplies:
Kit:  Dark Romance by Amy Marie.  This kit can be found at the following store www.amymarieskits.com,
Template:  602 by Millies PSP Madness

Open up the template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Re size the canvas to a bigger size and delete the copyright layer.

Merge Layers 6, 8 and 10 together.  Select all, float, deflate.  Paste Pp20 into the selection, select none.

Layer 5:  Select all, float, deflate.  Paste pp7 into the selection, select none.

Layer 4:  Select all, float, deflate.  Paste Pp3 into the selection, select none.

Merge Layers 7, 9, and 11 together.  Select all, float, deflate.  Paste Pp4 into the selection, select none.

Layers 2&3:  Select all, float, deflate.  Paste Pp10 into the selection, select none.

Layer 1:  Select all, float, deflate.  Paste Pp15 into the selection, select none.

C/P Elements 3&4 on to the canvas.  Re size them both by 65% twice.  Place them on the bottom left.

C/P Element 19 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 25 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 58 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

C/P Element 88 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 96 on to the canvas.  Place it behind the elements on the left side.

C/P Elementg 118 on to the canvas.  Re size it by 75% once.  Place it on the bottom left and behind the other elements except Element 96.

C/P Element 97 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it behind the elements on the right side.

C/P Element 24 on to the canvas.  Rotate it 90 degrees to either the right or left.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Nereida

I used the lovely Tube Nereida for these tags.  You can fine her here.

White Wedding

White Wedding
©Barbara Butler
April 2015

Supplies:
Kit:  White Wedding by Amy Marie.  This kit can be found at the following store www.amymarieskits.com

Mask:  WSL 84

New Image 800X 600 72 DPI

Select all, paste Pp4 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 4 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 18 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind Element 4.  Back on Element 4 take the eraser tool and erase parts of it that goes over Element 18.

C/P Element 28 on to the canvas.  Re size it by 75% once.  Place ito on the right side.

C/P Element 34 on to the canvas.  Re size it by 75% twice.  Place it on the right side and in front of the other elements.

C/P Element 38 on to the canvas.  Re size it by 75% three times.  Place it on the left side and in front of the other elements.

C/P Element 43 on to the canvas.  Re size it by 75% once.  Place Elements 4 and 18 on top of it.  Merge the three together.  Re size it by 75% once and place it on the left side.  And behind the shoes.

C/P Element 45 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 68 on to the canvas.  Re size it twice, once by 45% then again by 65% once.  Place it on top of Element 43 and to the right of the other elements on top of it.

C/P Element 101 on to the canvas.  Re size it by 65% twice.  Place it on the left side and on top of Element 45.

C/P Element 120 on to the canvas.  Duplicate it and place both where you would like.

C/P Element 136 on to the canvas.  Re size it by 65% once.  Place it on the top right and rotate it 15 degrees to the right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Country Western

I used the kit Country Western for these tags.  You can fine it here or here. 

 

In The Garden

In The Garden
©Barbara Butler
April 2015

Supplies:
Kit:  In The Garden by Amy Marie.  This kit can be found at the following stores  Amy Marie Kits, PFD,
Mask:  WSL 84

New Image 800X600 72DPI

Select all, paste Pp22 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 48 on to the canvas.  Place it on the left side.  Duplicate and move this one to the right just a little bit.  Merge the two together.  Duplicate this one and move this to the right side.

C/P Element 10 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the rigth side.

C/P Element 33 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind the watering can.

C/P Element 52 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 70 on to the canvas.  Re size it by 45% once.  Place it on the left side and in front of the other elements.

C/P Element 86 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 87 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 93 on to the canvas.  Re size it by 75% twice.  Place it on the top.

C/P Element 100 on to the canvas.  Re size it by 75% twice.  Place it on top of Element 87 so it looks like the bush has some flowers growing on it.

C/P element 105 on to the canvas.  Re size it by 65% twice.  Place it on the top.

C/P Element 114 on to the canvas.  Re size it by 65% once.  Place it on the bottom and behind the rabbit and pots but in front of the bush.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Riley

I used the lovely Tube Riley for these tags.  You can fine her here.

Vintage Spring

Vintage Spring
©Barbara Butler
April 2015

Supplies:
Kit:  Vintage Spring by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD,
Inzpired Creationz, Scrapping Your Memories 

Mask:  FM_2015_2 by Dee.

New Image 800X600 72DPI

Select all, paste Pp25 into the selection, select none.  Apply the mask and merge the group.  Click on the inside with the magic wand, expand the selection by 20, add a new layer and paste Pp10 into the selection, select none.  Place the paper below the mask layer.

C/P Element 1 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 9 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind Element 1.

C/P Element 18 on to the canvas.  Flip it horizontally and place it behind the elements on the right side.

C/P Element 16 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 20 on to the canvas.  Place it on the bottom and behind the other elements. 

C/P Element 38 on to the canvas.  Leave it right where it is at but below the other elements in the layer palette.

C/P Element 40 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it in front of the elements on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Nayara

I used the lovely Tube Nayara for these tags.  You can fine her here.

Lovely Sophia

Lovely Sophia
©Barbara Butler
April 2015

Supplies:
Kit:  Lovely Sophia by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com,
PFD Here, Inzpired Creationz Here,
Scrapping Your Memories
Here
Mask:  WSL 84.

New Image 800X600 72DPI

Select all and paste Pp5 into the selection, select none.  Apply the mask and merge group.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand, expand the selection by 5, add a new layer and paste Pp1 into the selection, select none.

C/P Element 36 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 39 on to the canvas.  Re size it by 35% once.  Place it on the bottom left.

C/P Element 71 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind Element 39.

C/P Element 84 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind Element 39.

C/P Element 42 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 140 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind Element 42.

C/P Element 136 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom right and in front of the other elements.

C/P Element 94 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right, and place it on the top right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.