Pages

Monday, June 29, 2015

July




I used the lovely Tube July for these tags.  You can fine her here.

Victoria

I used the lovely Tube Victoria for these tags.  You can fine her here.


I used American Beauty by Amy Marie for this tag. 



I used Ariel by Amy Marie for this tag.
Both kits can be found Here.

Sunday, June 28, 2015

American Woman

American Woman
©Barbara Butler
June 2015


Supplies:
Kit:  American Woman by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD, Tiny Turtle
Template:  Allegiance by Dee of Dees'Sign Depot.  You can fine the link to her site on the side.  Make sure you leave a thank you when you download.

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the font info and copyright layers.  And re size the canvas to a bigger size so the elements will fit.

Blue Circle:  Select all, float, deflate.  Paste Pp3 into the selection, select none.

Red Star:  Select all, float, deflate.  Paste Pp16 into the selection, select none.

Center Creme Rectangles:  Select all, float, deflate.  Paste Pp13 into the selection, select none.

Top and Bottom Rectangles:  Select all, float, deflate.  Paste Pp19 into the selection, select none.

Top and Bottom Creme Squares:  Select all, float, deflate.  Paste Pp14 into the selection.  Keep selected and go to the Top and Bottom Rectangle and hit the delete key, move these above the Top and Bottom Creme Squares, select none.

Blue Stripes:  Select all, float, deflate.  Paste Pp18 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

White Stripes:  Select all, float, deflate.  Paste Pp8 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Red Stripes:  Select all, float, deflate.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Word Art Layers:  Select all, float, deflate.  Paste Papers of choice as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Add a gradient glow of choice, I used a white then I repeated the gradient glow using a red and a blue.  Re size it by 75% once.  Place it on the right side.

C/P Element 9 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Element 23 on to the canvas.  Re size it by 75% once.  Place it on the top left.

C/P Element 38 on to the canvas.  Place it on the bottom right.

C/P Element 55 on to the canvas.  Place it on the bottom left and behind the Element 9 (make sure it is showing from the top of it though).

C/P Element 72 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 108 on to the canvas.  Re size it by 65% once.  Place it on the left side and to the right of the other elements.

C/P Element 127 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of the car.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Friday, June 26, 2015

America







I used the lovely Tube America for these tags.  You can fine her here

Mellisse

Mellisse
©Barbara Butler
June 2015


Supplies:
Kit:  Ashley by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Tube:  Mellisse This tube can be found at http://tinyturtledesigns.com/store/
Mask:  WSL 84

New Image 800X600 72DPI. 

Select all, paste Pp1 into the selection, select none.  Apply the mask and merge the group.

C/P Element 2 on to the canvas.  Place it on the top right.

C/P Element 16 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Tube on to the canvas.  Re size it as many times as needed.  Place it behind Element 16 and in front of Element 2.

C/P Element 31 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind Element 16.

C/P Element 51 on to the canvas.  Place it on the left side and behind the other elements and the tube.

C/P Element 55 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 54 on to the canvas.  Re size it by 65% once  Place it on the right side and in front of Element 55.

C/P Element 81 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 111 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom and in front of the other elements.

C/P Element 98 on to the canvas.  Place it on the left side and behind everything else including the tube.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tuesday, June 23, 2015

Vero

Vero
©Barbara Butler
June 2015


Supplies:
Tube:  Vero by Onawiss.  This tube can be found at http://tinyturtledesigns.com/store/
Kit:  Lemon N Lime by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Mask:  WSL 84

This tut focuses on the tube.  Please only use the tube if you have bought it and have a license to do so.

New Image 800X600 72DPI.

Select all, paste Pp18 into the selection, select none.  Apply the mask and merge the group.

C/P the Tube on to the canvas.  Re size it by 75% three times.

C/P Element 5 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 8 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and behind the tube.  Duplicate it and place this one on the top right.

C/P Element 51 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of the other elements.

C/P Element 76 on to the canvas.  Place it behind the other elements and the tube.

C/P Element 110 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it in front of the elements on the bottom left.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Dragon Beauty

Dragon Beauty
©Barbara Butler
June 2015


Supplies:
Kit:  Dragon Beauty by Amy Marie.  This kit can be found at the following stores www.amymarieskits.com, PFD
Tiny Turtle 

Template:  582 by Millies PSP Madness

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

Layers 1&2:  Select all, float, deflate.  Paste Pp4 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layers 3&4:  Select all, float, deflate.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 5:  Select all, float, deflate.  Paste Pp12 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 6:  Select all, float, deflate.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layers 7&8:  Select all, float, deflate.  Paste Pp13 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layers 9&10:  Select all, float, deflate.  Paste Pp1 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 6 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 19 on to the canvas.  Flip it horizontally and place it on the top right.

C/P Element 26 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 34 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the right side.

C/P Element 40 on to the canvas.  Place it on the bottom left and in front of the other elements.

C/P Element 59 on to the canvas.  Place it on the bottom and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, June 22, 2015

Jocelyne

Jocelyne
©Barbara Butler
June 2015


Supplies:
Kit:  Rosa by Amy Marie.  This kit can be found at the following stores www.amymarieskits.com, PFD
Tube:  Jocelyne by Lysisange.  This tube can be found at http://tinyturtledesigns.com/store/
Mask:  WSL84

New Image 800X600 72DPI.

Select all, paste Pp14 into the selection, select none.  Apply the mask and merge the group.

C/P Tube on to the canvas.  Re size it by 50% twice.

C/P Element 4 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the right.  Place it on the right side and behind the Tube.

C/P Element 8 on to the canvas.  Re size it by 75% once.  Place it on the right side and in front of the tube.

C/P Element 14 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the Tube.  Rotate it 15 degrees to the left.

C/P Element 27 on to the canvas.  Place it on the bottom left and behind the Tube.

C/P Element 65 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 92 on to the canvas.  Place it on the right side and behind Elements 27&8.

C/P Element 99 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place to the left of the Tube.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sunday, June 21, 2015

Elisabeth

Elisabeth
©Barbara Butler
June 2015


Supplies:
Kit:  Sweet Pea by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD
Tube:  Elisabeth by Soul Designer This tube can be found at http://tinyturtledesigns.com/store/
Template:  620 by Millies PSP Madness

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas to about 900X852 in size.

Layers 1&2:  Select all, float, deflate.  Paste Pp010 into the selection, select none.

Layer 3:  Select all, float, deflate.  Paste Pp013 into the selection, select none.

Layer 4:  Select all, float, deflate.  Paste Pp016 into the

Layer 5:  Select all, float, deflate.  Paste Pp018 into the selection, select none.

Layer 6:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp4 into the selection, select none.

Layer 7:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp8 into the selection, select none.

Layers 8&9:  Select all, float, deflate.  Paste Pp6 into the selection, select none.

Layer 10:  Select all, float, deflate.  Paste Pp011 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Move to the bottom right.  Add a gradient of choice, I used a medium glow and a shade of pink and light yellow and move the nodes a little bit.  Add a drop shadow using the following settings:  V&H 3, Opacity 96, Blur 10, Color #0c1800.

Paste Tube on to the canvas.  Re size it by 50% once and 75% twice.  Place in the middle.

C/P Element 6 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind the word art layer.

C/P Element 3 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

C/P Element 8 on to the canvas.  Flip it horizontally and place it behind the word art on the bottom right.  Add the same drop shadow as before.

C/P Element 15 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and in front of Element 3.

C/P Element 21 on to the canvas.  Place it on the top left.

C/P Element 30 on to the canvas.  Place it on the bottom and behind the other elements.  Add the same drop shadow as before.

C/P Element 42 on to the canvas.  Place it on the bottom and behind everything else including the tube.

C/P Element 81 on to the canvas.  Place it on the top and behind Element 21.

C/P Element 99 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 123 on to the canvas.  Re size it by 75% twice.  Place it on the top left of the fence.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Friday, June 19, 2015

Violetta

Violetta
©Barbara Butler
June 2015


Supplies:
Kit:  Tropical Treasure by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.comPFD 
Tube:  Violetta by Lysisange. This tube can be found at Tiny Turtle Design Store
Template:  Salty Kisses by Dee.  You can fine the link to her site on the side.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer and re size the canvas.

Aqua Ovals:  Select all, float, deflate.  Paste Pp23 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Purple Oval:  Select all, float, deflate.  Paste Pp25 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Right&Left Blue Rectangles:  Select all float, deflate.  Paste Pp19 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Aqua Strip:  Select all, float, deflate.  Paste Pp10 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Blue Strip:  Select all, float, deflate.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Top&Bottom Light Blue Squares:  Select all, float, deflate.  Paste Pp22 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

The white borders:  Select all, float, deflate.  Paste Pp21 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Wordart recolor layer:  Using the manual color changer change the color to a color of your choice.  I choose a purple.

Wordart White Option 1:  Using the manual color changer change the color to a color of your choice.  I choose a light blue.

Merge all the word art layers together.  Except for Word art gold option 2.  Re size them by 75% once and place to your liking.

C/P the tube on to the canvas.  Re size it by 75% four times.  Place it on the left side.

C/P Element 25 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 33 on to the canvas.  Re size it by 65% once.  Place it on the right side of Element 25.

C/P Element 32 on to the canvas.  Place it on the left side and behind the other flowers.

C/P Element 55 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the left and place it in front of the tube on right side.

C/P Element 62 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of the elements.

C/P Element 67 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of the other elements.

C/P Element 84 on to the canvas twice.  Re size one by 75% once.  Place it on the right side and behind and to the left of the other elements but in front of the tube.  Place the other one on the left side and behind the other elements.

C/P Element 94 on to the canvas.  Re size it by 75% twice.  Place it on the top left.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Wednesday, June 17, 2015

Clara



I used the lovely Tube Clara for these tags.  You can fine her here
 


Captain

Captain
©Barbara Butler
June 16, 2015


Supplies:
Kit:  Sailing Summer by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD,
Tube:  Captain by Alehandra Vanhek This tube can be found at http://tinyturtledesigns.com/store/
Mask:  WSL 194

Select all, paste Pp8 into the selection, select none.  Apply the mask and merge the group.

C/P Element 5 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand and expand the selection by 5.  Add a new layer and paste Pp3 into the selection, select none.  Move the paper layer below the frame in the layer palette.

C/P The tube on to the canvas.  Re size it by 50% once then by 75% twice, duplicate it move one below the frame and one on top.  Back on the paper layer, select all, float, deflate, contract the selection by 4, invert the selection, go to the tube below the frame and hit the delete key, on the one above the frame take the scissor tool and delete the parts below the dancing ants.

C/P Element 26 on to the canvas.  Re size it by 65% once then by 75%.  Place it on the bottom left.

C/P Element 24 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

C/P Element 34 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 47 on to the canvas.  Re size it by 65% once.  Place it on the top left.

C/P Element 98 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind all the other elements.  Duplicate it and move this to the left of the original.  Duplicate this one and move it to the left of the the first duplicate.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tuesday, June 16, 2015

Yellow Roses

Yellow Roses
©Barbara Butler
June 2015


Supplies:
Kit:  Yellow Roses by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD, Tiny Turtle 

Mask:  WSL 84

Select all, paste Pp14 into the selection, select none.  Apply the mask and merge the group.

C/P Element 6 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and rotate it 30 degrees to the left.

C/P Element 11 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of Element 11.

C/P Element 14 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 35 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the bottom left.

C/P Element 50 on to the canvas.  Re size it by 75% three times.  Place it on the right side and in front of the other elements.

C/P Element 68 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 74 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Elemnet 86 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 37 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it in front of the other elements on the bottom left.

C/P Element 20 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 21 on to the canvas.  Re size it by 75% once.  Place it behind the other elements on the right side.  Rotate it 15 degrees to the left.

C/P Element 33 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it towards the left a little bit.

C/P Element 48 on to the canvas.  Place it on the top right and behind the other elements.  Duplicate it and place this one on the bottom left.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sunday, June 14, 2015

Brittany

Brittany
©Barbara Butler
June 2015


Supplies:
Kit:  Brittany by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD, Tiny Turtle

Template:  605 by Millies PSP Madness

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Re size the canvas and delete the copyright layer.

Layers 1&2:  Select all, float, deflate.  Paste Pp4 into the selection, select none.

Layer 4:  Select all, float, deflate.  Paste Pp2 into the selection, select none.

Layers 3&5:  Select all, float, deflate.  Paste Pp7 into the selection, select none.

Layer 6:  Select all, float, deflate.  Paste Pp16 into the selection, select none.

Layers 7&8:  Select all, float, deflate.  Paste Pp14 into the selection, select none.

Layer 11:  Delete this layer.

C/P Element 9 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 7 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 17 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 22 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 27 on to the canvas.  Re size it by 65% once.  Place it on the top right.

C/P Element 31 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it behind the elements on the bottom left.

C/P Elemnet 44 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 59 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind the other elements.

C/P Element 94 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.


Rylie



I used the lovely Tube Rylie for these tags.  
You can fine her here.

Friday, June 12, 2015

American Beauty

American Beauty
©Barbara Butler
June 2015



Supplies:
Kit:  American Beauty by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com,
PFD, Tiny Turtle
Template:  766 by Millie PSP Madness

Open up the template, duplicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size.

Layer 5:  Select all, float, deflate.  Paste Pp23 into the selection, select none.

Layer 1:  Select all, float, deflate.  Paste Pp17 into the slection, select none.

Layers 2, 3, and 4:  Select all, float, deflate.  Paste Pp8 into the selection, select none.

Layer 6:  Select all, float, deflate.  Paste Pp20 into the selection, select none.

Layer 7:  Select all, float, deflate.  Paste Pp18 into the selection, select none.

Word Art Layers:  Merge together.

C/P Element 2 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and behind the word art layer.

C/P Element 10 on to the canvas.  Place it on the left side and behind the word art layer.

C/P Element 18 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and behind Element 10.

C/P Element 21 on to the canvas.  Place it on the right side and behind everything else.

C/P Elements 40 amd 41 on to the canvas.  Place them both on the right side and behind the other elements.  Overlap the two just a little bit.

C/P Element 55 on to the canvas.  Re size it by 65% twice.  Place it on the right side and to the left of the shoe.

C/P Element 101 on to the canvas.  Place it behind Layer 7.

C/P Element 57 on to teh canvas.  Re size it by 85% once.  Place it on the left side and behind the word art layer.

C/P Element 47 on to the canvas.  Place it where ever you would like.

C/P Element 38 on to the canvas.  Place it where ever you would like.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Kary

Kary

I used the lovely Tube Kary by Onawiss for these tags.  You can fine her here



Kit Bottoms Up by Amy Marie



Kit Mermaid Fun by Amy Marie.

Both kits can be found Here



Tuesday, June 9, 2015

Jessica

Jessica
©Barbara Butler
June 2015


Supplies:
Kit:  Karen by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com,
PFD
Tube:  Jessica by Carpe Diem.  This tube can be found at Tiny Turtle Designs
Mask:  WSL84

New Image 800X600 72DPI

Select all, paste Pp4 into the selection, select none.  Apply the mask and merge group.  Duplicate it 3 times and merge them all together.

C/P Element 27 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the right and place it on the left side.

C/P Element 28 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 62 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it behind the elements on the right side.

C/P Element 72 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 71 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom right and behind Element 28.

C/P Element 90 on to the canvas.  Re size it by 75% once.  Place it behind the other elements.

C/P Element 92 on to the canvas.  Re size it by 75% twice.  Place it on the top right of Element 90.

C/P Element 98 on to the canvas.  Re size it by 75% once.  Place it on the bottom and in front of Element 90.

C/P Element 97 on to the canvas.  Re size it by 65% twice.  Place it on the top left and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Birthday In July

Birthday In July
©Barbara Butler
June 2015




 Supplies:
 Kit:  Birthday In July by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD, Tiny Turtle 
Mask:  WSL 84

Select all, paste Pp20 into the selection, select none.  Apply the mask and merge the group.

C/P Element 18 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 20 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the left and place it on the top left.

C/P Element 22 on to the canvas.  Re size it by 75% ocne.  Place it on the left side and behind the other elements.

C/P Element  41 on to the canvas.  Re size it by 75% once.  Place it behind the other elements.

C/P Element 59 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the right and place it on the right side.

C/P Element 103 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 96 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind Element 103.

C/P Element 3 on to the canvas.  Place it on the bottom and behind the other elements on the right side and Element 18

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Saturday, June 6, 2015

Weekend Sales

*§*Amy Maries Kits Weekend Sale*§*
Come and check out Amy's weekend sale.  Kits and clusters are .74 cents.  Some CU stuff are on sale as well.  Here

Milen





I used the lovely tube Milen by Lady Mishka  for these tags.  You can fine her here.

I used the kits Baby Girl Angel and Pink Passion by Amy Marie.  You can fine both here.
 

Miradee







I used the lovely Tube Miradee for these tags.  You can fine her here.
I used the following kits.  For the first one I used Roses and the second one I used Sweet Pea both by Amy Marie of Amy Maries Kits.  Both kits can be found Here.

Tiki Party

Tiki Party
©Barbara Butler
June 2015



Supplies:
Kit:  Tiki Party by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFD, Tiny Turtle 

Template:  Summer Breeze by Dee.  You can fine the link to her site on the side.
Mask:  WSL  84

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and font info layers. 

BG:  Select all, hit the delete key, paste Pp14 into the selection, select none.  Apply the mask and merge the group.

Blue Oval:  Select all, float, deflate.  Paste Pp13 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer. 

Top and Bottom Purple Rectangles:  Select all, float, deflate.  Paste Pp11 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.  Repeat for the dark blue rectangles top and bottom.

Delete the top and bottom purple shapes, and both Aqua Circles and raster 11.

Aqua Rectangle:  Select all, float, deflate.  Paste Pp12 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

White Oval:  Select all, float, deflate.  Paste Pp9 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Word Art White Layer:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp5 into the selection, select none.  Repeat for the top and bottom dashed line layers.

White Bordered Rectangles:  Select all, float, deflate.  Paste Pp5 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 11 on to the canvas.  Re size it by 75% once.  Place it on the top left.

C/P Element 14 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 21 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Element 25 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind the other elements.

C/P Element 30 on to the canvas.  Re size it by 75% once.  Place it on the bottom left and in front of the other elements.

C/P Element 40 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind the other elements.

C/P Element 72 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 106 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tuesday, June 2, 2015

Lauren

I used the lovely Tube Lauren for these tags.  You can fine her here.




Evening Glamour

Evening Glamour
©Barbara Butler
June 2015



Supplies:
Kit:  Courtney by Amy Marie.  This kit can be found at the following stores  Amy Maries KitsPFD 
Tube:  Evening Glamour by Alfadesire This tube can be found at Tiny Turtle Designs
Mask:  WSL 084

New Image 800X600 72DPI

Select all, paste Pp1 into the selection, select none.  Apply the mask and merge the group.

C/P Element 14 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 23 on to the canvas.  Place it on the left side but place the right side of the element is behind Element 14.

C/P Element 30 on to the canvas.  Place it on the left side and behind the other elements.  Rotate it 15 degrees to the left.

C/P Element 40 on to the canvas.  R e size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 53 on to the canvas.  Re size it by 65% three times.  Place it on the right side and in front of the other elements.

C/P Element 64 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 79 on to the canvas.  Re size it by 75% once.  Place it on the bottom and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

American Cowboys

American Cowboys
©Barbara Butler
June 2015





Supplies:
Kit:  American Cowboys by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFDTiny Turtle
Template:  584 by Millies PSP Madness

Open template and check to make sure it is at 72DPI.  Duplicate and close the original.  Delete the copyright layer and re size the canvas to a bigger size.

Layer 12:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp9 into the selection, select none.

Layers 1&2:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp5 into the selection, select none.

Layers 3&4:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp14 into the selection, select none.

Layers 8&9:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp1 into the selection, select none.

Layer 7:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp11 into the selection, select none.

Layers 10&11:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp15 into the selection, select none.

Layers 5&6:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp13 into the selection, select none.

C/P Element 9 on to the canvas.  Place it on the top left and send it to the bottom in the layer palette.

C/P Element 30 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 38 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 37 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind Element 38.

C/P Element 57 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 78 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 82 on to the canvas.  Re size it by 65% once.  Place it on the top.  Add a fat gradient glow using a dark blue and white from the tag.  Add a drop shadow using the following settings V-3, H-5, Opacity 80, Blur 3, Color #f2f2f2.

C/P Element 87 on to the canvas.  Place it on the bottom left and behind Element 30.  Rotate it 15 degrees to the left.  Duplicate it once.

C/P Element 89 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it to the right and behind the cowboy boot.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, June 1, 2015

Camping Trip

Camping Trip
©Barbara Butler
June 2015



Supplies:
Kit:  Hanging with Dad by Amy Marie.  This kit can be found at the following stores  www.amymarieskits.com, PFDTiny Turtle


New Image 800X600 72DPI.

C/P Element 12 on to the canvas.  Re size it by 75% once.

C/P Element 14 on to the canvas.  Re size it by 65% twice.  Place it on the right side of the tent.

C/P Element 13 on to the canvas.  Re size it by 65% twice.  Place it in front of Element 14.

C/P Element 25 on to the canvas.  Re size it twice once by 65% then by 50%.  Place it on the left side of the tent.

C/P Element 23 on to the canvas.  Re size it by 50% twice.  Place it on the right side.

C/P Element 22 on to the canvas.  Re size it by 50% twice.  Place it on the left side of the hamburger.

C/P Element 9 on to the canvas.  Re size it by 50% twice.  Place below the other elements on the canvas.

C/P Element 24 on to the canvas.  Re size it by 45% twice.  Place it on the right side of the firepit.

C/P Element 65 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind Elements 23 and 22.  Duplicate it, flip it horizontally and place it on the left side and behind Element 25.

C/P Element 75 on to the canvas.  Place it on the left side and behind the other elements.  Duplicate it twice and move each of the duplicates to the right so they go behind the tent and to the right side.

C/P  Element 64 on to the canvas.  Re size it by 65% three times.  Place it on the left side and in front of Element 75.  Duplicate it and move this one over to the right side (this way the bottom parts of Element 75 are covered).

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.