Cherry Blossom

Cherry Blossom
©Barbara Butler
February 2015

Supplies:
Kit:  Cherry Blossom by Amy Marie.  This kit can be found at www.amymarieskits.com
Tube:  Cherry Blossom By Norella.  Can be found at Here
Template:  Keep Calm by Dee.  Just click on her link to go to her site.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.  Re size the canvas so the elements will fit later on (you can re size it to your liking but this might change some of the settings later on).

Creme Rectangle:  Select all, float, deflate.  Paste Pp19 into the selection, select none.

Creme Octagon:  Select all, float, deflate.  Paste Pp18 into the selection, select none.

Pink Boxes:  Select all, float, deflate.  Paste Pp14 into the selection, select none.  Repeat for Large Grey Circle.

Orange Rectangle:  Select all, float, deflate.  Paste Pp22 into the selection, select none.

Small Grey Circle:  Select all, float, deflate.  Paste Pp28 into the selection, select none.  Repeat this for Orange Octagon.

Pink Rectangle:  Select all, float, deflate.  Paste Pp21 into the selection, select none.  Repeat for the Creme Circle and Grey Octagon.

Tiara:  Select all, float, deflate.  Paste Pp21 into the selection, move to your liking.  Repeat for the word art layers.  Add a drop shadow to the Keep Calm and star Layers.  For the Tiara (word art) White layer select all, float, deflate and paste Pp28 into the selection, select none.

C/P Element 2 on to the canvas.  Place towards the top and add a gradient glow of choice.

C/P Element 8 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 18 on to the canvas.  Re size it by 75% twice.  Place it on top of the T in Tiara.  Now with the magic wand erase part of the tail feathers between the feet.

C/P Element 24 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

C/P Element 29 on to the canvas.  Place it on the left side and in front of the birdbath.

C/P Element 59 on to the canvas.  Re size it by 75% twice.  Place it on the top left of the octagon layers.

C/P Element 97 on to the canvas.  Place it on the bottom right and behind the word art layer.

C/P Element 96 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of everything else.

C/P Element 56 on to the canvas.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Zanna

Two new tags using the amazing Zanna tube by Norella.  She goes great with all the wonderful fantasy kits out there, I paired her with a couple of kits by Amy Marie.  You can fine this lovely poser Here.

Irish Spring

Irish Spring
©Barbara Butler
February 2015

Supplies:
Kit: Irish Spring by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  NFM_2015_1 by Dee.  You can fine the link to her site on the side.  Just click on her banner.

New Image 800X600 72DPI. 

Select all and paste Pp15 into the selection, select none.  Apply the mask and merge the group.

C/P Element 4 on to the canvas.  Re size it by 75% once.  Place it on the top left.

C/P Element 14 on to the canvas.  Place it on the bottom.

C/P Element 15 on to the canvas.  Re size it by 75% twice.  Rotate it 15 degrees to the left and place it on the left side.

C/P Element 51 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

C/P Element 70 on to the canvas.  Re size it by 75% twice.  Rotate it 15 degrees to the right and place it on the top right.

Back on the mask layer using the magic wand click on the inside.  Expand the selection by 5.  C/P Element 81 on to the canvas move it down just a little bit, invert the selection and hit the delete key.  Keep selected, add a new layer and paste Pp16 into the selection, move this below the element.

C/P Element 93 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 67 on to the canvas.  Re size it by 65% twice.  Place it behind the other elements but in the middle of Element 81 (see my tag for proper placement). 

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Lyra

Do you love dragons and princesses then this poser is for you.  She goes well with any fantasy style kit out there.  I paired with Dragon Lady by Amy Marie.

 

Poser can be found Here

Kit can be found Here

Lolita

I made two tags using the lovely poser Lolita by Norella.  You can fine this lovely lady Here.  She comes in multiple layers.  I used the light blue and light pink layers for the following two tags.

Lucky Bear

Lucky Bear
©Barbara Butler
February 2015

Supplies:
Kit:  Lucky Bear by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  602 by Millies PSP Madness.  You can fine the link to her site on the side.  Just click on her blinkie.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.

Layer 4:  Select all, float, deflate.  Paste Pp1 into the selection, select none.

Layers 6, 8, &10:  Select all, float, deflate.  Paste Pp5 into the selection, select none.

Layers 7, 9, &11:  Select all, float, deflate.  Paste Pp10 into the selection, select none.

Layers 2&3:  Select all, float, deflate.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 1:  Select all, float, deflate.  Paste Pp6 into the selection, select none.

Layer 5:  Select all, float, deflate.  Paste Pp9 into the selection, select none.

C/P Element 4 on to the canvas.  Place it on the left side.

C/P Element 18 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C/P Element 28 on to the canvas.  Re size it by 75% three times.  Place it on the right side.

C/P Element 41 on to the canvas.  Re size it by 75% once.  Place it behind the elements on the right side.

C/P Element 47 on to the canvas.  Re size it by 75% twice.  Place it on the bottom and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Lucky In Love

Lucky In Love
©Barbara Butler
February 2015

Supplies:
Kit:  Lucky In Love by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL84

New Image 800X600 72DPI.

Select all, paste Pp6 into the selection, select none.  Apply the mask and merge group.

C/P Element 11 on to the canvas.  Place it on the left side and rotate it 15 degrees to the left.

C/P Element 16 on to the canvas.  Re size it by 65% twice.  Place it on the top left and rotate it 15 degrees to the left.

C/P Element 26 on to the canvas.  Place it on the top right.  Add a gradient glow and a drop shadow of choice.

C/P Element 32 on to the canvas.  Place it on the bottom.

C/P Element 61 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Element 86 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 106 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 136 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the top left and behind Element 16.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Ailee

Ailee
©Barbara Butler
February 2015

Supplies:
Kit:  Ailee by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  583 by Millies PSP Madness.  You can fine the link to her site on the side.
Tube Ailee By Norella.  Can be found at http://designsbynorella.weebly.com/store/p450/Ailee_Poser_Tube.html

Open template and check to make sure it is at 72DPI.  Duplicate and close the original.  Delete the copyright layer.  Re size the canvas to a little bit bigger size.

Layers 1&2:  Select all, float, deflate.  Paste Pp3 into the selection, select none.

Layers 9&10:  Select all, float, deflate.  Paste Pp19 into the selection, select none.

Layer 3:  Select all, float, deflate.  Paste Pp20 into the selection, select none.

Layers 4&5:  Select all, float, deflate.  Paste Pp9 into the selection, select none.

Layer 8:  Delete this layer.

Layer 11:  Select all, float, deflate.  Using a Pink and Black from the tag flood fill the letters alternating between the two colors, add pool shadow effect and tow the line effect, settings to your liking.  Keep selected, add a new layer and paste Element 119 into the selection, select none.  Back on the wording add a gradient glow.  Change the blend on the element to one that you like. 

Layers 12&13:  Select all, float, deflate.  Paste Pp18 into the selection, select none.

C/P Element 121 on to the canvas.  Re size it by 65% once, then by 75%.  Place it on the right side.

Merge Layers 9&10 together.  Select all, float, deflate, add a new layer and paste Element 119 into the selection, select none.  Change the blend mode to Soft Light and add a drop shadow with the following setting V&H:-2, Op. 95, Blur 0, Color #d9d8f2.

C/P Element 112 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top left.

C/P Element 109 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom left.

C/P Element 103 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it behind the car on the right side.

C/P Element 89 on to the canvas.  Re size it by 65% three times.  Place it on the bottom left and in front of the other elements. 

C/P Element 90 on to the canvas.  Re size it by 50% twice.  Flip it horizontally and place it on the left side of Element 89.

C/P Element 53 on to the canvas.  Re size it by 50% once.  Place it on the right side and behind the car but in front of the branch.

C/P Element 37 on to the canvas.  Place it on the bottom and behind everything else.

C/P Element 30 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it behind the flowers on the left side.

C/P Element 3 on to the canvas.  Re size it by 50% once.  Place it on the right side and in front of the other elements (make sure you can still see the car).

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Mardi Gras

Mardi Gras
©Barbara Butler
February 2015

Supplies:
Kit:  Mardi Gras 2015 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 84
Tube By Norella.  Can be found at http://designsbynorella.weebly.com/store/p459/Emilie_Poser_Tube.html

New Image 800X600 72DPI

Select all, paste Pp1 into the selection, select none.  Apply the mask and merge group.

C/P Element 15 on to the canvas.  Rotate it 30 degrees to the right.  Duplicate it, flip the duplicate horizontally and line the bottoms of both where they overlap one another.  Merge the two together. Duplicate this one and flip this vertically and move it to where the ends overlap once more.  Merge these two together.  Re size it by 85% once.

C/P Element 15 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 18 on to the canvas.  Re size it by 65% once.  Place it on the top right.

C/P Element 25 on to the canvas.  Place it on the left side.

C/P Element 54 on to the canvas.  Re size it by 50% once.  Place it on the left side and in front of Element 25.

C/P Element 55 on to the canvas.  Re size it by 50% once.  Place it on the left side and in front of the other elements.

C/P Element 59 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it behind the elements on the right side.

C/P Element 64 on to the canvas.  Re size it by 65% once.  Place it behind the other elements.

C/P Element 75 on to the canvas.  Place it on the left side and in front of the other elements.
Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

C/P Element 79 on to the canvas.  Re size it by 65% once.  Place it on the left side.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Foxy Love

Foxy Love
©Barbara Butler
February 2015

Supplies:
Kit:  Foxy Love by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  562 by Millies PSP Madness

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Re size the canvas to a little bit bigger size (for the elements later on).  Delete the copyright layer.

Layers 6&8:  Select all, float, deflate.  Paste Pp7 into the selection, select none.

Layers 4&5:  Select all, float, deflate.  Paste Pp13 into the selection, select none.

Layer 2:  Select all, float, deflate.  Paste Pp19 into the seleciton, select none.

Layers 9-11:  Select all, float, deflate.  Paste Pp8 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 7:  Select all, float, deflate.  PastePp9 into the selection, select none.

C/P Element 1 on to the canvas.  Re size it by 75% once.  Place it on the bottom.

C/P Element 5 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 9 on to the canvas.  Place it on the top.

C/P Element 15 on to the canvas.  Re size it by 75% twice.  Place it on the left side of Element 9.

C/P Element 16 on to the canvas.  Re size it by 75% twice.  Place it on the right side of Element 9.

C/P Element 20 on to the canvas.  Rotate it 15 degrees to the left.  Place it on the left side and behind the other elements.

C/P Element 25 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 28 on to the canvas.  Re size it by 75% twice.  PLace it on the bottom left and behind the other elements.

C/P Element 34 on to the canvas.  Flip it horizontally and place it on the right side.

C/P Element 38 on to the canvas.  Place it to the right and behind Element 1.

C/P Element 36 on to the canvas.  Re size it by 75% once.  Place it to the left and behind Element 1.

C/P Element 76 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees and place it behind the elements on the right side.  Duplicate it, flip horizontally and place this one on the left side.

C/P Element 86 on to the canvas.  Re size it by 75% twice.  Place it where you would like.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Pink Chocolate

Pink Chocolate
©Barbara Butler
February 2015

Supplies:
Kit:  Pink Chocolate by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI.

C/P Element 15 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand, expand the selection by 5.  Add a new layer and paste Pp20 into the selection, select none and move the paper layer below the frame.

C/P Element 14 on to the canvas.  Re size it by 75% three times.  Place it on the right side.

C/P Element 19 on to the canvas.  Re size it by 65% twice.  Place it on the top left of the frame.

C/P Element 37 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind Element 14.

C/P Element 47 on to the canvas.  Re size it twice, once by 45% then by 75%.  Place it on the bottom shelf of Element 19.

C/P Element 65 on to the canvas.  Re size it three times, once by 45% then two more times by 75%.

C/P Element 94 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 97 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 82 on to the canvas.  Re size it by 75% once.  Place it on the right side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Dianne

Two new tags featuring Norella's poser Dianne.  You can fine her Here.  The kit I used was made to match her and you can fine it Here, Here, Here, Here, or Here.

Ailee

Two new tags using the lovely Ailee by Norella.  This beauty can be found Here.

Blue Velvet

Blue Velvet
©Barbara Butler
February 2015

Supplies:
Kit:  Blue Velvet by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  657 by Millies PSP Madness.  You can fine the link to her site over on the side.
Effects:  Pentacom Jean

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.  If you want you can re size the canvas to a bigger size.

Layer 2:  Select all, float, deflate.  Paste Pp21 into the selection, select none.

Layer 3:  Take a dark blue and a shade a little lighter then the first blue from the previous paper and flood fill with a linear gradien settings:  Angle 45, Repeat 1, Invert Checked.  Add the penta jeans effect setting of your choice.  Repeat this for Layer 4.

Layers 5&6:  Select all, float, deflate.  Paste Pp17 into the selection, select none.

Layer 1:  Select all, float, deflate.  Paste Pp8 into the selection, select none.

Layer 7:  Select all, float, deflate.  Paste Pp5 into the selection.  Keep selected and go to Selections>Select Selection Border>Both Sides Checked, Width 2>Anti-Alias Checked>Hit Ok>Add a new layer>Paste Pp14 into the selection>Select none.

C/P Element 5 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the bottom right.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Place it on the top right.

C/P Element 28 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 27 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

C/P Element 32 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 66 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the right and place it behind the other elements on the right side.

C/P Element 77 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 81 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it in front of the elements on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I changed the blend modes on some of my tube layers, I just played around with the setting until I found I liked, feel free to use any kind of settings or effects you would like.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.