Pages

Wednesday, December 31, 2014

Lavendar Roses

Lavendar Roses
©Barbara Butler
December 2014


Supplies:
Kit:  Lavendar Roses by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  RR Mask Set 17_2

Open new image 800X600 72 DPI

Select all and paste Pp6 into the selection, select none.  Apply the mask and merge the mask group.  Select all, float, defloat, add a new layer and paste Pp19 into the selection, re size this by 95% once.

C/P Element 1 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 2 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 4 on to the canvas.  Re size it by 75% once.  Place it behind the elements on the right side.

C/P Element 8 on to the canvsa.  Re size it by 75% three times.  Place it on the bottom right and in front of the other elements.

C/P Element 10 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 27 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 25 on to the canvas.  Add a drop shadow with the following settings V3, H4, Op84, Blur 0, Color black.

C/P Element 33 on to the canvsa.  Re size it by 65% twice.  Place it behind the elements on the left side.

C/P Element 68 on to the canvas.  Place it behind the elements on the left side.

C/P Element 88 on to the canvas.  Re size it by 75% once.  Place it on the top right and in front of Element 4.  Add the same drop shadow as before.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Thursday, December 18, 2014

Frances

Frances
©Barbara Butler
December 2014


Supplies:
Kit:  Frances by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  RR_Mask Set17_4

New Image 800X600 72DPI

Select all, paste Pp11 into the selection, select none.  Apply the mask and merge the group.  Duplicate it once and merge the two together.

C/P Element 36 on to the canvas.  Re size it by 75% once.

C/P Element 5 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 2 on to the canvas.  Re size it by 65% once.  Place it on the left side and in front of the other elements.

C/P Element 9 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the right side.

C/P Element 12 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side.

C/P Element 19 on to the canvas.  Re size it by 75% once.  Place it behind Element 36.

C/P Element 34 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind Element 36.

C/P Element 35 on to the canvas.  Re size it by 75% once.  Place it on the right and in front of Element 36.  Duplicate it, flip the duplicate horizontally and place it on the left side.

C/P Element 42 on to the canvas.  Re size it by 50% once.  Place it on the bottom and behind Element 36.

C/P Element 66 on to the canvas.  Re size it by 50% once.  Place it on the right side and in front of the other elements.

C/P Element 78 on to the canvas.  Re size it by 50% once.  Place it on the top right.  Add a drop shadow of choice.

C/P Element 76 on to the canvas.  Re size it by 50% once.  Place it on the bottom left and in front of the other elements.

C/P Element 6 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

C/P Element 11 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it in front of the elements on the right side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, December 15, 2014

Winter Love

Winter Love
©Barbara Butler
December 2014


Supplies:
Kit:  Winter Love by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Valentine Template I Love You by Dee.  You can fine the link to her site over on the side.

Open Template and check to make sure it is at 72 DPI.  Dupicate it and close the original.  Delete the copyright layer and re size the canvas to a bigger size.  Depending on the size of your canvas you might have to adjust re sizing of the elements my numbers are based on the size I used.

Right Heart:  Select all, float, deflate.  Paste Pp25 into the selection, select none.  Repeat this for the Left Heart.

Banner BG:  Select all, float, deflate.  Paste Pp19 into the selection, select none.

Inside Banners:  Select all, float, deflate.  Paste Pp11 into the selection, select none.

Black Oval:  Select all, float, deflate.  Paste Pp7 into the selection, select none.

White Oval Ring:  Select all, float, deflate.  Paste Pp19 into the selection, select none.

Rod:  Select all, float, deflate.  Paste Pp18 into the selection, select none.

Black Word Art:  Select all, float, deflate.  Paste Pp14 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

White Word Art:  Select all, float, deflate.  Paste Pp15 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

White Scrolls:  Select all, float, deflate.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

C/P Element 6 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 7 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 13 on to the canvas.  Re size it by 75% twice.  Place it on the top right and in front of the other elements.

C/P Element 15 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 31 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 66 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind the other elements.

C/P Element 78 on to the canvas.  Re size it by 75% three times.  Place it on the bottom left and in front of the other elements.

C/P Element 85 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the other elements.

C/P Element 94 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it behind the elements on the right side.

C/P Element 80 on to the canvas.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Friday, December 12, 2014

Christmas Days

Christmas Days
©Barbara Butler
December 2014


Supplies:
Kit:  Christmas Days by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Tag This Template Xmas by Dee.  You can fine the link to her site over on the side.

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Re size the canvas to a bigger size.

Green Rectangle:  Select all, float, deflate.  Paste Pp5 into the selection, select none.

Red Tree Shape:  Select all, float, deflate.  Paste Pp25 into the selection, select none.

Top Red and Green Rectangles:  Select all, float, deflate.  Hit the delete key a couple of times and paste Pp21 into the selection, select none.

Top Creme Rectangle:  Select all, float, deflate.  Paste Pp19 into the selection, select none.

Yellow Oval:  Select all, float, deflate.  Paste Pp18 into the selection, select none.

Left and Right Green Ovals:  Select all, float, deflate.  Paste Pp12 into the selection, select none.

Creme Oval:  Select all, float, deflate.  Paste Pp10 into the selection, select none.

Red Center Rectangle:  Select all, float, deflate.  Paste Pp15 into the selection, select none.

White Oval:  Select all, float, deflate.  Paste Pp13 into the selection, select none.

C/P Element 1 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 2 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of Element 1.

C/P Element 11 on to the canvas.  Re size it by 65% twice.  Place it on the top.

C/P Element 12 on to the canvas.  Re size it by 65% twice.  Place it on the top right and behind the word art layers.

C/P Element 16 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 19 on to the canvas.  Re size it by 65% once.  Place it on the top left.

C/P Element 43 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the candle.

C/P Element 55 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place to the right and behind the candle.

C/P Element 59 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

C/P Element 110 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the right side.

C/P Element 111 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tuesday, December 9, 2014

Christmas Magic

Christmas Magic
©Barbara Butler
December 2014


Supplies:
Kit:  Christmas Magic by Amy Marie.  This kit can be found at www.amymarieskits.com


New Image 800X600 72DPI

C/P Element 8 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand, expand the selection by 9, add a new layer and paste Pp18 into the selection, select none.  Move the paper below the frame.  Rotate both 90 degrees to the left.

C/P Element 28 on to the canvas.  Re size it by 65% twice.  Place it on the right side.

C/P Element 55 on to the canvas.  Re size it by 65% three times.  Place it on the top and in the middle.

C/P Element 60 on to the canvas.  Re size it by 65% once.  Place it on the bottom and behind the other elements.

C/P Element 68 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side and behind the other elements.

C/P Element 71 on to the canvas.  Re size it by 65% once.  Flip it horizontally place it on the left side and behind the other elements.

C/P Element 81 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Saturday, December 6, 2014

Scarlettes Christmas

Scarlettes Christmas
©Barbara Butler
December 2014


Supplies:
Kit:  Scarlettes Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com
Tube:  Scarlette by Designs by Norella.  You can fine this tube at www.designsbynorella.weebly.com.
Effect:  Alien Skin Xenofex2 Constellation, Eye Candy 4000 Gradient Glow (For the copyright and name).

New Image 800X600 72DPI.

C/P Element 2 on to the canvas.  Re size it by 75% once.  Place it on the top and center it.  Click on the inside with the magic wand, expand it by 5, add a new layer and paste Pp8 into the selection, select none.  Move this layer below the frame.  Click on the black around the frame, Add constellation of choice.

*C/P  Tube on to the canvas.  Re size it by 45% once, then re size it two more times by 65%.  Place it on the left side.

C/P Element 141 on to the canvas.  Re size it by 65% once.  Place  it on the bottom and in front of the other elements and the tube.  Make sure the word Merry touches the frame a little bit.

C/P Element 142 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind Element 141.

C/P Element 139 on to the canvas.  Re size it by 65% three times.  Place it on the top right.

C/P Elemengt 131 on to the canvas twice.  Re size them both by 75% once.  Flip one horizontally and place this one on the left side.  Place the other one on the right side.  Merge the two together and place them behind all the other elements.

C/P Element 132 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the tube.  Rotate it 15 degrees to the left.

C/P Element 118 on to the canvas.  Re size it by 50% once.  Place it on the top right and behind the bow.  Rotate it 15 degrees to the right.

C/P Element 112 on to the canvas.  Re size it three times once by 50% the other two times by 75%.

C/P Element 74 on to the canvas.  Re size it by 75% twice.  Place it on the left side and in front of the other elements.

C/P Element 138 on to the canvas.  Re size it by 75% three times.  Place it on the left side and behind the candle.

C/P Element 104 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

*Back on the paper layer:  Select all, float, deflate.  Paste the tube back on to the canvas.  Re size it by 65% once.  Move it to where the face is inside the marching ants (place it to your liking within it), invert the selection and hit the delete key.  Change the blend mode to overlay.

Add some drop shadows to some of the layers.

*Depending on the tube you use settings will be different.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Friday, December 5, 2014

Its Christmas Time

Its Christmas Time
©Barbara Butler
December 2014


Supplies:
Kit:  Its Christmas Time by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Temp118 by Leah of Amy Leahs Gimptastictuts.  You can fine this at amyleahsgimptastictuts.blogspot.com

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and word art layers.  Re size the canvas to a bigger size for the elements.

Square 1:  Select all, float, deflate.  Paste Pp14 into the selection, select none.

Square 2:  Select all, float, deflate.  Paste Pp23 into the selection, select none.

Thin Circle:  Select all, float, deflate.  Paste Pp31 into the selection, select none.

Circle:  Select all, float, deflate.  Paste Pp38 into the selection, select none.

Tree1-4:  Merge these together, the Select all, float, deflate.  Paste Pp38 into the selection, select none.

Tree Outline:  Select all, float, deflate.  Paste Pp40 into the selection, select none.

Frame1:  Select all, float, deflate.  Paste Pp40 into the selection, select none.

Frame 2:  Select all, float, deflate.  Paste Pp38 into the selection, select none.

C/P Element 11 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 65 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the right side.

C/P Element 52 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right and place it on the top right of the pink square.

C/P Element 69 on to the canvas.  Re size it by 65% twice.  Place it on the top right of the green square.

C/P Element 83 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 98 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 119 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the other elements.

C/P Element 121 on to the canvas four times.  We're going to be placing this on the tree so the re sizing is going to be different for each layer of the tree.  If you have any hangover just take the eraser tool and delete some of it.

C/P Element 55 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top left.

C/P Element 20 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the other elements.

C/P Element 96 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.
 
Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Wednesday, December 3, 2014

Happy Holidays

Happy Holidays
©Barbara Butler
December 2014


Supplies:
Kit:  Happy Holidays by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  Monti-Mask-Vortex

New Image 800X600 72 DPI

Select all, paste Pp8 into the selection, select none.  Apply the mask and merge the group.  Duplicate it and rotate it 90 degrees to the right.  Merge the two together, duplicate it and rotate this one 45 degrees to the right, merge visible.  Select all, float, defloat.  Add a new layer and paste Pp11 into the selection, select none, move this below the first one.  Back on Pp8 re size this one by 85% once.

C/P Element 5 on to the canvas.  Place it on the top left.

C/P Element 11 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

C/P Element 1 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it in front of the elements on the left side.

C/P Element 37 on to the canvas.  Re size it by 75% once.  Place it behind the elements on the right side.  Duplicate, re size the duplicate by 75%, place this in front of the original, duplicate this one and place it on the right side of the original.

C/P Element 53 on to the canvas.  Re size it by 75% once.  Place it on the top left and behind the other elements.

C/P Element 65 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 89 on to the canvas.  Re size it by 75% twice.  Place it on the right side of Element 65.

C/P Element 116 on to the canvas.  Re size it by 75% twice.  Place it behind the other elements on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tuesday, December 2, 2014

Oh What Fun

Oh What Fun
©Barbara Butler
December 2014


Supplies:
Kit:  Oh What Fun by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 194

New Image 800X600 72 DPI

Select all, paste Pp12 into the selection, select none.  Apply the mask and merge the group.

C/P Element 39 on to the canvas.  Re size it by 75% once.  Duplicate it three times.  Place two of the them over on to the right and flip them horizontally.  Re size one on the left and one on the right by 75% once.  Move these ones down just a little.

C/P Element 2 on to the canvas.  Re size it by 75% three times.  Place it on the left side and in front of the other elements.

C/P Element 3 on to the canvas.  Leave it where ti is at and behind the other elements.

C/P Element 6 on to the canvas.  Re size it by 75% twice.  Place it on the right and in front of the other elements.

C/P Element 12 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 43 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind the nutcracker.

C/P Element 49 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it in front of the elements on the left.

C/P Element 66 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 84 on to the canvas.  Re size it by 65% once.  Place it where the reindeer is on the top left.

C/P Element 93 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the house.

C/P Element 88 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements except the reindeer.  Duplicate it a few times and place these to your liking.

C/P Element 1 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, December 1, 2014

Christmas Angels

Christmas Angels
©Barbara Butler
December 2014


Supplies:
Kit:  Christmas Angels by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  20/20 I'm not sure who made this mask but if anyone knows where to fine send me the link and I'll be happy to add it.

New Image 800X600 72 DPI

Select all, paste Pp4 into the selection, select none.  Apply the mask and merge the group.

C/P Element 1on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 6 on to the canvas.  Re size it by 75% twice.  Place it on the right side, and in front of Element 1.

C/P Element 18 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind Element 6.

C/P Element 24 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 34 on to the canvas.  Place it on the left and behind Element 24.

C/P Element 86 on to the canvas.  Place it on the left side and behind the other elements, duplicate it and place the duplicate on the right side.

C/P Element 99 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 129 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the children.

C/P Element 149 on to the canvas.  Leave it right where it is at.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.