Pages

Wednesday, July 30, 2014

Dragon Lady

Dragon Lady
©Barbara Butler
July 2014


Supplies:
Kit-Dragon Lady by Amy Marie.  This kit can be found at www.amymarieskits.com

C/P Element 46 on to the canvas.  Re size it by 65% once.  With the magic wand click on the inside of each slat, add a new layer and paste Pp1 into the selection, select none.  Move the paper layer down below the frame.

C/P Element 17 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 28 on to the canvas.  Place it on the right side and behind everything else.

C/P Element 39 on to the canvas.  Re size it by 75% once.  Place it on the left side and in front of the other elements.

C/P Element 45 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind everything else.

C/P Element 59 on to the canvas.  Re size it by 75% twice.  Place it on the left side and in front of Element 46.

C/P Element 96 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and flip it horizontally.

C/P Element 76 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 69 on to the canvas.  Re size it by 65% three times.  Place it on the bottom left and in front of the other elements.

C/P Element 63 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind everything else except for Element 28.

Back on the paper layer; Select all, float, defloat.  Paste a tube of choice on to the canvas.  Re size as needed, invert the selection and hit the delete key, select none.  I used an exclusive tube from over at Pics For Design but you can use any tube you would like.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Lilith

Lilith
©Barbara Butler
July 2014


Supplies:
Kit-Lilith by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-634 by Millies PSP Madness.  www.milliespspmadness.com

Open template and duplicate it.  Re size it 800X659.  Delete the copyright and word art layers.

Paper Layers:


01:  Leave as is.

02:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

03:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

04:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

05:  Select all, float, defloat.  Paste Pp22 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

06:  Select all, float, defloat.  Paste Pp2 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

07:  Select all, float, defloat.  Paste Pp2 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Elements:

C/P Element 11 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 15 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 26 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 34 on to the canvas.  Place it on the bottom and in front of the elements on the right.

C/P Element 36 on to the canvas.  Place it behind the elements on the left side.

C/P Element 49 on to the canvas.  Place behind Element 11 on the left side.

C/P Element 46 on to the canvas.  Re size it by 75% three times.  Place it behind everything on the right side including the paper layers.

C/P Element 47 on to the canvas.  Re size it by 75% once.  Place it in front of the elements on the right side.

C/P Element 51 on to the canvas.  Re size it by 65% twice.  Place it in front of the elements on the left side.

C/P Element 105 on to the canvas.  Re size it by 65% twice.  Place it behind the snake on right side.

C/P Element 136 on to the canvas.  Re size it by 65% twice.  Place it on top of the couch on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tuesday, July 29, 2014

Purple Punk

Purple Punk
©Barbara Butler
July 2014


Supplies:
Kit-Cute Punk2 by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-619 by Millies PSP Madness.  www.milliespspmadness.blogspot.com

Open up template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and word art layers.  Re size the canvas to 800X800

Layer 1:  Select all, float, defloat.  Paste Pp11 as a new layer, invert the selection hit the delete key, select none.  Close or delete the original layer.

Layer 2:  Select all, float, defloat.  Paste Pp22 into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp22 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp24 as a new layer, invert the selection hit the delete key, select none.  Close or delete the original layer.

Layer 5:  Select all, float, defloat.  Paste Pp24 as a new layer, invert the selection hit the delete key, select none.  Close or delete the original layer.

Layer 6:  Select all, float, defloat.  Paste Pp1 as a new layer, invert the selection hit the delete key, select none.  Close or delete the original layer.

Layer 7:  Select all, float, defloat.  Paste Pp1 as a new layer, invert the selection hit the delete key, select none.  Close or delete the original layer.

Layer 8:  Select all, float, defloat.  Paste Pp3 into the selection, select none.

Layer 9:  Select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 10:  Select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 3 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

C/P Element 2 on to the canvas.  Re size it by 65% twice.  Place it on the left side of Element 3.

C/P Element 8 on to the canvas.  Re size it by 65% once.  Place it on the top right.

C/P Element 10 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C/P Element 15 on to the canvas.  Place it behind Element 10.

C/P Element 20 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 26 on to the canvas.  Place it behind the elements on the left side.

C/P Element 61 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements.

C/P Element 72 on to the canvas.  Re size it by 75% once.  Place it between the two elements on the bottom right and flip it horizontally.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.


A little note:  This kit also comes in purple and pink and purple as well.  You can use any of the kits to make this tag depending on what color you would like it to be.  Of course depending on the kit you use you might need to change the tube.

Pink Punk

Pink Punk
©Barbara Butler
July 2014


Supplies:
Kit-Cute Punk3 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84

Pink Punk
©Barbara Butler
July 2014

Supplies:
Kit-Cute Punk3 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84

New Image 800X600 72DPI

Select all and paste Pp23 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 35 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand and expand the selection by 3, add a new layer and paste Pp1 into the selection, select none.  Move the paper below the frame.

C/P Element 29 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the left.  Move it over to the left just a little bit.  Duplicate it and mirror the duplicate it, move this one to the right just a little bit.  Merge the two together and re size it one more time by 75%.  Place it on the bottom left.

C/P Element 14 on to the canvas.  Re size it by 75% once.  Place it in the middle of the other two elements.  Flip it horizontally.

C/P Element 1 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 9 on to the canvas. Re size it by 75% twice.  Place it on the top right.

C/P Element 11 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 27 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right and place it behind Element 11.

C/P Element 84 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 86 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the other elements.

C/P Element 85 on to the canvas.  Re size it by 65% once.  Place it behind the other elements on the right side.  Rotate it 15 degrees to the right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.


A little note:  This kit also comes in purple and pink and purple as well.  You can use any of the kits to make this tag depending on what color you would like it to be.  Of course depending on the tube you use you might need to change the tube.
New Image 800X600 72DPI

Select all and paste Pp23 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 35 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand and expand the selection by 3, add a new layer and paste Pp1 into the selection, select none.  Move the paper below the frame.

C/P Element 29 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the left.  Move it over to the left just a little bit.  Duplicate it and mirror the duplicate it, move this one to the right just a little bit.  Merge the two together and re size it one more time by 75%.  Place it on the bottom left.

C/P Element 14 on to the canvas.  Re size it by 75% once.  Place it in the middle of the other two elements.  Flip it horizontally.

C/P Element 1 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 9 on to the canvas. Re size it by 75% twice.  Place it on the top right.

C/P Element 11 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 27 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right and place it behind Element 11.

C/P Element 84 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 86 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the other elements.

C/P Element 85 on to the canvas.  Re size it by 65% once.  Place it behind the other elements on the right side.  Rotate it 15 degrees to the right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.


A little note:  This kit also comes in purple and pink and purple as well.  You can use any of the kits to make this tag depending on what color you would like it to be.  Of course depending on the tube you use you might need to change the tube.

Monday, July 28, 2014

Harvest Time

Harvest Time
©Barbara Butler
July 2014


Supplies:
Kit-Sweet Harvest by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84

New Image 800X600 72DPI.

Select all, C/P Pp16 into the selection, select none.  Apply the mask and merge the mask group.   Select all, float, defloat.  Add a new layer and C/P Pp5 into the selection, select none.

C/P Element 7 on to the canvas.  Place it on the bottom right.  Duplicate it, flip the duplicate horizontally and place it on the left side.

C/P Element 20 on to the canvas.  Re size it by 65% three times.  Place it on the bottom left.

C/P Element 26 on to the canvas.  Re size it by 65% once.  Place it behind Element 20 on the left.

C/P Element 32 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 35 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top left.

C/P Element 4 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C/P Element 45 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 51 on to the canvas.  Re size it by 50% once.  Place it on the bottom left.

C/P Element 58 on to the canvas.  Re size it by 50% once.  Place it on the top right.

C/P Element 65 on to the canvas.  Re size it by 50% once.  Place it on the bottom and behind Element 51.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sunday, July 27, 2014

Agent Orange

CT Tag using Agent Orange
Tube By:  Robin McQuay
Tag By:  Barbara Butler




Tube can be found Here


Fairyland In Fall

Fairyland In Fall
©Barbara Butler
July 2014


Supplies:
Kit-Fairyland In Fall
 by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-639 by Millies PSP Madness.  www.milliespspmadness.blogspot.com.

Open up template and check to make sure it is at 72DPI.  Duplicate it and close the original one.  Delete the copyright layer.  Re size the canvas to a little bit bigger size so the elements will fit.

10&11:  Select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

8&9:  Select all, float, defloat.  Paste Pp10 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

7:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

6:  Select all, float, defloat.  Paste Pp5 as a new layer, invert the selection and hit the delete key.  Close or delete the original layer.

4&5:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

3:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

1&2:  Select all, float, defloat.  Paste Pp28 into the selection, select none.

C/P Element 4 on to the canvas.  Re size it by 65% twice.  See my tag for placement.

C/P Element 11 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C/P Element 10 on to the canvas.  Re size it by 65% once.  Place it on the top right.

C/P Element 16 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 47 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the left side.

C/P Element 59 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the right side.

C/P Element 78 on to the canvas.  Re size it by 85% once.  Place it on the bottom.

C/P Element 79 on to the canvas.  Re size it twice once by 65% then by 75%.  Place it on the bottom right and in front of the other elements.

C/P Element 88 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind Element 79.

C/P Element 106 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 130 on to the canvas.  Re size it by 65% once.  Place it behind Element 106.

C/P Element 133 on to the canvas.  Re size it by 65% three times.  Place it in front of the elements on the left side.

C/P Element 137 on to the canvas.  Place it on top and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Saturday, July 26, 2014

Spiced Tones

Spiced Tones
©Barbara Butler
July 2014


Supplies:
Kit-Spiced Tones by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-605 by Millie's PSP Madness

Open up template and check to make sure its at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.

2:  Select all, float, defloat.  Paste Pp6 into the selection, select none.

1:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

4:  Select all, float, defloat.  Paste Pp17 into the selection, select none.

5:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

3:  Select all, float, defloat.  Paste Pp15 into the selection, select none.

7:  Select all, float, defloat.  Paste Pp20 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this for 8.

6:  Select all, float, defloat.  Paste Pp27 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this for 11.

Delelet layers 9 and 10.

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 5 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the right side.

C/P Element 9 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 24 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 23 on to the canvas.  Re size it by 50% twice.  Place it on the bottom right.

C/P Element 33 on to the canvas.  Re size it by 75% twice.  Place it behind the elements on the left.

C/P Element 34 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it on the bottom right.

C/P Element 51 on to the canvas.  Re size it by 50% twice.  Place it in front of the elements on the left side.

C/P Element 59 on to the canvas.  Re size it by 55% twice.  Place it on the bottom left.

C/P Element 66 on to the canvas.  Re size it by 55% once.  Place it on the left of the front rectangles.

C/P Element 81 on to the canvas.  Re size it by 55% once.  Place it in front of the yellow paper on the right.

C/P Element 78 on to the canvas.  Re size it by 75% once.  Place it on the bottom and in front of the other elements.

C/P Element 87 on to the canvas.  Re size it by 75% twice.  Place it behind the purple rectangle. 

C/P Element 98 on to the canvas.  Re size it by 55% twice.  Place it in front of the elements on the left side.

C/P Element 38 on to the canvas.  Re size it by 55% twice.  Place it on the top right of the purple rectangles.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Thursday, July 24, 2014

Vintage

Vintage
©Barbara Butler
July 2014


Supplies:
Kit- by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI.

C/P Element 34 on to the canvas.  Re size it by 75% twice.  C/P Pp12 on to the canvas move it below the frame.  Back on the frame layer  take the magic wand and click on the inside of each frame, expand the selection by 5 invert the selection and back on the paper layer hit the delete key.

C/P Element 11 on to the canvas.  Re size it by 65% twice.  Place it it on the bottom right.

C/P Element 10 on to the canvas.  Re size it by 75% once.  Place it behind element 11 on the bottom right.

C/P Element 14 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 37 on to the canvas.  Re size it by 75% once.  Place it behind the elements on the right side.

C/P Element 70 on to the canvas.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Wednesday, July 23, 2014

Edith

Edith
©Barbara Butler
July 2014


Supplies:
Kit-Edith by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-Dianas Mask60.  Not sure where I got this one from but I do believe it is from the Creative Misfits Blog.

New Image 800X600 72DPI.

Select all and paste Pp6 into the selection, select none.  Apply the mask and merge the mask group.  Re size it by 85% once.

C/P Element 7 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 14 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 18 on to the canvas.  Re size it by 65% once.  Place it on the top right and behind Element 14.

C/P Element 33 on to the canvas.  Rotate it 15 degrees to the left and place it on the left side.

C/P Element 32 on to the canvas.  Re size it by 65% then one more time by 75%.  Place it on the left side and behind Element 33.

C/P Element 37 on to the canvas.  Place it on the bottom and behind all of the other elements.

C/P Element 41 on to the canvas.  Re size it by 75% once.  Place it behind Element 7.

C/P Element 44 on to the canvas.  Re size it by 75% once.  Place it behind the elements on the right side (except the buttons).

C/P Element 60 on to the canvas.  Re size it by 75% twice.  Place it behind Element 33.

C/P Element 66 on to the canvas.  Place it on the bottom and in the layer palette move it below the elements on the left side.

C/P Element 71 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind Element 7.

C/P Element 80 on to the canvas.  Re size it by 65% once.  Place it in front of Element 44 on the right side.

C/P Element 102 on to the canvas.  Re size it by 65% once.  Place it behind all the other elements.

C/P Element 116 on to the canvas.  Re size it by 65% once.  Place it in front of the other elements on the left side.  Add a gradient glow and a drop shadow of choice.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tuesday, July 22, 2014

Happy Days

Happy Days
©Barbara Butler
July 2014


Supplies:
Kit-Cherry Lime by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-635 by Millie's PSP Madness www.milliespspmadness.blogspot.com

 Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.  This template doesnt say Raster or Layer in the layer palette so I will be just putting the number for each different layer.  Re size the canvas to a good size for the elements.

4:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

7:  Select all, float, defloat.  Paste Pp3 into the selection, select none.  Repeat this for 8.

2:  Select all, float, defloat.  Paste Pp11 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this for 3.

6:  Select all, float, defloat.  Paste Pp15 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.

1:  Select all, float, defloat.  Paste Pp7 as a new layer.  Invert the selection and hit the delte key, select none.  Close or delete the original layer.

See my tag for proper element placement.


C/P Element 3 on to the canvas.  Re size it by 75% once.  Place ti on the bottom right.

C/P Element 10 on to the canvas.  Re size it by 65% once then again by 75%.  Place it on the top left.

C/P Element 9 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Element 14 on to the canvas.  Re size it by 75% twice.  Place it on the top of the right square.

C/P Element 21 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 25 on to the canvas.  Re size it by 50% once.  Place it beside Element 21.

C/P Elements 30 and 31 on to the canvas, make sure that Element 30 is on top of 31.  Merge the two together and re size them by 50% once then one more time by 75%.  Place it behind Element 21 and flip it horizontally so you can see the poodle on the skirt.

C/P Element 29 on to the canvas.  Re size it by 65% three times.  Place it on the bottom right and in front of Element 3.

C/P Element 52 on to the canvas.  Re size it by 65% once.  Place it on the top left and behind the other elements.

C/P Element 12 on to the canvas.  Re size it by 50% once.  Place it on the bottom left and behind the skates.

C/P Element 15 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, July 21, 2014

Romancing Ava

Romancing Ava
©Barbara Butler
July 2014


Supplies:
Kit-Romancing Ava by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  Dianas Mask 64.  I dont remember where I got this mask from so if you know where it is from please let me know and I will get the proper credits for it.  But I do believe you can get this over at the Creative Misfits Blog.

New Image 800X600 72DPI.

Select all.  Paste Pp2 into the selection, select none.  Select all, float, defloat.  Selections, Modify, Modify Select Selection Border, Outside, Width Border3, add a new layer and flood fill with a cream color I used #efe3bd, Select none.  Merge the two layers together and re size it by 75% once.

C/P Element 9 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 32 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom right.

C/P Element 36 on to the canvas.  Re size it by 50% twice.  Place it on the top right.

C/P Element 38 on to the canvas.  Re size it twice once by 50% then by 75%.  Rotate it 15 degrees to right and place it behind the cagt on the bottom right.

C/P Element 46 on to the canvas.  Re size it twice once by 45% then by 75%.  Flip it horizontally and place it on the top left.

C/P Element 51 on to the canvas.  Re size it by 45% once.  Place it behind the cat on the right side.

C/P Element 60 on to the canvas.  Re size it by 45% once.  Place it behind Element 9 on the left side.

C/P Element 69 on to the canvas.  Re size it twice once by 45% then by 75%.  Place it on the right side of Element 9.

C/P Element 91  on to the canvsas.  Re size it by 75% once.  Place it behind the elements on the left side.

C/P Element 43 on to the canvas.  Place it behind all the elements on the bottom.  With the deform tool stretch it out so it reaches the edge of the paper layer.

C/P Element 24 on to the canvas.  Re size it by 85% twice.  Place it on the top and behind the other elements.

C/P Element 61 on to the canvas.  Re size it by 75% four times.  Duplicate it and re size the duplicate by 75% once.  Merge the two together and place it on the right side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Friday, July 18, 2014

Raspberry Vinaigrette

Raspberry Vinaigrette
©Barbara Butler
July 2014


Supplies:
Kit:  Raspberry Vinaigrette by Amy Marie.  This kit can be found at www.amymarieskits.com
Template/Mask:  Mask-WSL84

New Image 800X600 72DPI.

C/P Pp33 on to the canvas.  Apply the mask and merge the mask group.

C/P Element 1 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C/P Element 3 on to the canvas.  Re size it by 65% twice then one more time by 75%.  Place it on the left side of Element 1.

C/P Element 4 on to the canvas.  Re size it by 75% three times.  Place it on the bottom left.

C/P Element 8 on to the canvas.  Re size it by 45% once.  Place it on the left side of Element 4.

C/P Element 12 on to the canvas.  Re size it by 75% once.  Place it behind the elements on the left side.

C/P Element 21 on to the canvas.  Re size it by 75% twice.  Place it behind the elements on the right side.

C/P Element 23 on to the canvas.  Re size it by 75% once then one more time by 65%.  Place it on the bottom left.

C/P Element 30 on to the canvas.  Re size it by 45% and one more time by 65%.  Place it on the bottom left.

C/P Element 74 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right and place it behind the elements on the right side.

C/P Element 36 on to the canvas.  Place it behind all of the other elements.  Click on the inside with the magic wand expand by 4, add a new layer and paste Pp27 into the selection, select none.  Move the paper below the frame.  Select all, float, defloat.  Add a new layer and paste Element 63 into the selection, select none.  Change the color of the wording to a dark red.

C/P Element 42 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Thursday, July 17, 2014

Fantasia



Tag was made using the kit Fantasia by Bits N Bobs.  This kit can be found Here.

Where Blue Birds Fly

Where Blue Birds Fly
©Barbara Butler
July 2014


Supplies:
Kit-Rainbow Fantasy by Amy Marie.  This kit can be found at www.amymarieskits.com
Template/Mask:  Template 637 by Millies PSP Madness.  www.milliespspmadness.blogspot.com.  This template doesnt say raster or layer for each of the layers so I'm writing them as they appear in the layer palette for example Layer 1 will be just 1.

Open up template and check to make sure it is at 72DPI.  Duplicate it and close the original one.  Delete the copyright layer.

5:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

4:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

6&7:  Select all, float, defloat.  Paste Pp43 into the selection, select none.

2&3:  Select all, float, defloat.  Paste Pp42 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

1:  Select all, float, defloat.  Paste Pp37 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 14 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 20 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 21 on to the canvas.  Re size it by 50% twice.  Place it on the bottom left.

C/P Element 50 on to the canvas.  Re size it by 50% once.  Place it on the top left.  Rotate it 15 degrees to the left.

C/P Element 96 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it behind the elements on the bottom left side.

C/P Element 102 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 156 on to the canvas.  Re size it by 75% once.  Place it behind Element 102 on the right side.

C/P Element 165 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the right side.

C/P Element 170 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 179 on to the canvas.  Place it on the bottom and behind all the other elements.

C/P Element 176 on to the canvas.  Re size it by 65% twice.  Place it  on the left side and behind Element 14.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Wednesday, July 16, 2014

Over The Rainbow

Over The Rainbow
©Barbara Butler
July 2014


Supplies:
Kit-Rainbow Fantasy by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C/P Element 100 on to the canvas.  Move down towards the bottom a little bit.

C/P Element 25 on to the canvas.  Re size it by 65% once.  Place it behind Element 100.

C/P Element 38 on to the canvas.  Place it behind the other elements.

C/P Element 42 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 45 on to the canvas.  Place it behind Element 100.

C/P Element 51 on to the canvas. Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 62 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind Element 42.

C/P Element 71 on to the canvas.  Re size it by 50% once.  Place it in front of Element 38.  Duplicate it and re size the duplicate by 75%, move this one down a little bit.

C/P Element 72 on to the canvas.  Re size it by 75% twice.  Place it behind the two elements on the left.

C/P Element 120 on to the canvas.  Re size it by 65% three times and place it behind all the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tuesday, July 15, 2014

Julia

Julia
©Barbara Butler
July 2014


Supplies:
Kit-Julia by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI.

C/P Element 57 on to the canvas.  Leave right where it is at.  Click on the inside with the magic wand, expand the selection by 4.  Paste Pp6 as a new layer, invert the selection and hit the delete key, select none.  Move the paper layer below the element.

C/P Element 6 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

 C/P Element 8 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 11 on the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 27 on to the canvas.  Re size it by 75% three times.  Place it on the left side and in front of Element 6.

C/P Element 30 on to the cdanvas.  Re size it by 75% once.  Place it on the right side and behind Element 11.

C/P Element 39 on to the canvas.  Re size it by 75% three times.  Place it on the right side and behind Element 11.

C/P Element 66 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 21 on to the canvas.  Re size it by 50% once.  Place it on the left side and it in front of the other elements.

C/P Element 15 on to the canvas.  Re size it twice once by 50% then by 75%.  Place it on the left.

C/P Element 16 on to the canvas.  Re size it by 45% once.  Place it on it on the bottom.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, July 14, 2014

Ashley

Ashley
©Barbara Butler
July 2014


Supplies:
Kit-Ashley by Amy Marie.  This kit can be found at www.amymarieskits.com
Template/Mask-Template:  Template 155 by HorsePlays' Pasture.  www.horseplayspasture.blogspot.com

Open template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Re size the canvas to 800X800.  Delete the copyright layer.

Raster 2:  Select all, float, defloat.  Paste Pp1 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.

Raster 3:  Select all, float, defloat.  Paste Pp11 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.

Raster 10:  Select all, float, defloat.  Paste Pp13 into the selection, select none.

Raster 7:  Select all, float, defloat.  Paste Pp19 into the selection, select none.

Raster 9:  Select all, float, defloat.  Paste Pp25 into the selection, select none.

Raster 11:  Select all, float, defloat.  Paste Pp24 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.

Raster 8:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

On the front circle layer; select all, float, defloat.  Add a new layer and paste close up of your tube into the selection (if your tube doesnt have a close up then paste the tube as a new layer instead of adding a new layer and pasting it into the selection).  Select none.  Change the blend mode to screen.

C/P Element 3 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 16 on to the canvas.  Re size it by 65% twice and one more time by 75%.  Place it on the bottom right.

C/P Element 24 on to the canvas.  Re size it by 75% twice.  Place it behind Element 16 on the right side.  Rotate it 15 degrees to the right.

C/P Element 29 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

C/P Element 27 on to the canvas.  Re size it by 50% twice.  Place it on top of Element 29.

C/P Element 81 on to the canvas.  Re size it by 50% once. Place it behind Element 3 on the left side.

C/P Element 85 on to the canvas.  Re size it by 50% once.  Place it behind the elements on the left side.

C/P Element 100 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.

C/P Element 49 on to the canvas.  Place it in front of the rectangle in the front on the right side.

C/P Element 48 on to the canvas.  Place it on top of Element 49.  Duplicate it and move it to the left of the original one a little bit.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Saturday, July 12, 2014

Before Dawn

Tube can be found Here

Johannah

Johannah
©Barbara Butler
July 2014


Supplies:
Kit-Johannah by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-548mpm by Millies PSP Madness.  www.milliespspmadness.blogspot.com

Open up template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Close or delete the copyright and word art layers. 

Layer 6:  Select all, float, defloat.  Paste Pp25 into the selection, select none.

Layers 4&5:  Select all, float, defloat.  Paste Pp26 into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp22 into the selection, select none.

Layers 1&2:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

C/P Element 8 on to the canvas.  Re size it by 75% twice.   Rotate it 15 degrees to the left and place it on the right side.

C/P Element 59 on to the canvas.  Place it on the right side.  Rotate it 30 degrees to the left and place it behind Element 8.

C/P Element 68 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 69 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.  Click on the inside with the magic wand expand it by 2 add a new layer and paste Pp20 into the selection, select none.  Move the paper layer below it.  Back on the element take the eraser tool and delete part of the legs that show on top of the paper.  Back on the paper layer; select all, float, defloat.  Add a new layer and paste Element 46 into the selection, select none.

C/P Element 83 on to the canvas.  Place it on the bottom right.  Move Element 8 in front of it.

C/P Element 97 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 98 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 117 on to the canvas.  Flip it horizontally and place it on the top right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Friday, July 11, 2014

Hopeless Romantic

Tag Using the Tube Hopeless Romantic by Robin McQuay.
Tube can be found Here

Here are some extras hope you enjoy them.







Thursday, July 10, 2014

Purrfect

Purrfect
©Barbara Butler
July 2014

Supplies:
Kit-Crazy Cat Lady by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-Paws-itively by Dee can be found at www.deessesigndepot.blogspot.ca

Open template and check to make sure it is at 72DPI.  Duplicate it and close the orginal.  Delete the copyright layer.

Top Yellow Square:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Orange Square:  Select all, float, defloat.  Paste Pp21 into the selection, select none.

White Border:  Select all, float, defloat.  Paste Pp18 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.

Bottom Turquoise Strip:  Select all, float, defloat.  Paste Pp10 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this for the Top Turquoise Strip.

Bottom Yellow Circle:  Select all, float, defloat.  Paste Pp15 into the selection, select none.

Yellow Oval:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Small Circles:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Right and Left Turquoise Rectangles:  Select all, float, defloat.  Paset Pp6 into the selection, select none.

Top and Bottom Aqua Strip:  Select all, float, defloat.  Paste Pp9 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.

White Circle:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Paw:  Select all, float, defloat.  Paste Pp8 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.

Word Art Layers:  Use the manual color to change the Gradient layer, and on the gold outline flood fill with a light blue color.  The glass and drop shadow layers leave alone.  Merge the word art layers together.  Re size it by 75% once.  Place it on the top right.

C/P Element 29 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 28 on to the canvas.  Re size it by 65% once.  Place it on the left side of Element 29.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 59 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Elements 60 and 61  on to the canvas.  Re size Element 60 by 75% twice, place it somewhere above Element 61.  Merge the two together.  Re size the merged elements by 65% twice.  Place it on the left side.

C/P Element 62 on to the canvas.  Re size it by 75% once.  Place it behind the elements on the left side.

C/P Element 63 on to the canvas.  Re size it by 85% once.  Place it behind the elements on the left side.

C/P Element 37 on to the canvas.  Re size it by 75% once.  Place it behind the word art layer on the top right.

C/P Element 26 on to the canvas.  Re size it by 75% twice.  Place it on the top left.

C/P Element 9 on to the canvas.  Re size it by 75% twice.  Place it in front of the other elements on the left side, except the yarn.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Wednesday, July 9, 2014

Magical

Magical
©Barbara Butler
July 2014


Supplies:
Kit-Magical by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL194

New Image 800X600 72DPI

Select all and paste Pp18 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 1 on to the canvas.  Place it on the bottom but leave it in the middle.

C/P Element 5 on to the canvas.  Re size it by 75% twice.  Place it on the left side of Element 1.

C/P Element 9 on to the canvas.  Place it on the left side of Element 1 and behind Element 5.

C/P Element 16 on to the canvas.  Re size it by 85% once.  Place it on the right side of Element1.

C/P Element 22 on to the canvas.  Re size it by 75% once.  Place it behind all the other elements.

C/P Element 44 on to the canvas.  Re size it by 75% twice.  Place it in front of the elements on the right side.

C/P Element 78 on to the canvas.  Re size it by 75% twice.  Place it in front of Element 1 on the bottom.

C/P Element 73 on to the canvas.  Re size it by 75% once.  Place it on the left and behind Element 78.

C/P Element 79 on to the canvas.  Re size it by 65% twice.  Place it on the top right.  Rotate it 15 degrees to the left.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Monday, July 7, 2014

Sailing Summers

Sailing Summers
©Barbara Butler
July 2014


Supplies:
Kit-Sailing Summers by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-Template189 by HorsePlay's Pasture.  www.horseplayspasture.blogspot.com

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Re size the canvas to about 800X800.  Delete the copyright, the word art and white background layers.

Layer 2:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Layers 8, 9, 11:  Merge the three together (you will have to move 11 and 9 down below the frames); select all, float, defloat.  Paste Pp17 into the selection, select none.

Layer 7:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp11 as a new layer, invert the selection and hit the delete key.  Select none, close or delete the original layer.

Layer 3:  Select all, float, defloat.  Paste PP12 into the selection, select none.

Layer 14:  Select all, float, defloat.  Paste Pp5 as a new layer, invert the selection and hit the delete key.  Select none, close or delete the original layer.  Repeat this for Layer 13.  Merge the two together.  Now on Layer 15-Select all, float, defloat.  Go back to the merged layer and hit the delete key.  Select none.

Layer 6:  Select all, float, defloat.  Paste Pp11 into the selection, select none.

Layer 17:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

Layer 16:  Select all, float, defloat.  Paste Pp12 as a new layer, invert the selection and hit the delete key.  Select none, close or delete the original layer.  Bring this to the top in the layer palette.

Layers 18, 12, and 10:  Merge them together; Select all, float, defloat.  Paste Pp9 into the selection, select none.

Layer 5:  Select all, float, defloat.  Paset Pp9 as a new layer, invert the selection and hit the delete key.  Select none, close or delete the original layer.

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 9 on to the canvas.  Re size it three times once by 50% then by 75% twice.  Place it on the bottom right.

C/P Element 14 on to the canvas.  Re size it by 75% twice.  Place it behind Element 9 on the right side.

C/P Element 24 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and rotate it 15 degrees to the right.

C/P Element 29 on to the canvas.  Re size it by 75% twice.  Place it on the right side and in front of the other elements.

C/P Element 30 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 42 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

C/P Element 47 on to the canvas.  Re size it by 45% once.  Place it on the top left and behind Element 30.

C/P Element 46 on to the canvas.  Re size it twice once by 45% then by 75%.  Place it on the bottom right and place it in front of the other elements.

C/P Element 49 on to the canvas.  Re size it twice, once by 45% then by 75%.  Place it on the right side of the lifeguard chair.

C/P Element 82 on to the canvas. Re size it by 75% twice.  Place it on the top right.

C/P Element 93 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

C/P Element 77 on to the canvas. Re size it by 75% once.  Place it behind the lifeguard chair, duplicate it and move the duplicate over a little bit to the right.

C/P Element 120 on to the canvas.  Re size it by 85% once.  Place it behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Saturday, July 5, 2014

With More Love

With More Love
©Barbara Butler
July 2014


Supplies:
Kit-With More Love by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL169

New Image 800X600 72DPI.

Select all and paste Pp2 into the selection.  Apply the mask and merge the mask group.  Duplicate two times and merge them all together.  Re size it by 75% once.

C/P Element 11 on to the canvas.  Re size it by 75% once.  Rotate it 90 degrees to the left.  Click on the inside with the magic wand, expand the selection by 3, add a new layer and paste Pp26 into the selection, select none.  Move the paper below the frame.

C/P Element 10 on to the canvas.  Re size it by 75% three times.  Place in the bottom right corner of the frame (make sure it is on top of the frame).

C/P Element 14 on to the canvas.  Re size it by 75% twice.  Place it behind Element 10.

C/P Element 17 on to the canvas.  Re size it by 50% once.  Place it behind Element 10.

C/P Element 67 on to the canvas.  Re size it by 50% once.  Place it on the bottom left.

C/P Element 79 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind Element 67.

C/P Element 83 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it on the right side and in front of the other elements.

C/P Element 114 on to the canvas.  Re size it by 50% once.  Place it on the left side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Thursday, July 3, 2014

Wisteria

Wisteria
©Barbara Butler
July 2014


Supplies:
Kit-Wisteria by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI.

C/P Element 146 on to the canvas.  Re size it by 85% once.  Click on the inside, expand the selection, add a new layer and paste Pp29 into the selection.  Select none.  Move this below the frame layer.

C/P Element 148 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 139 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C/P Element 147 on to the canvas.  Re size it by 65% three times.  Flip it horizontally and place it on the right side.

C/P Element 106 on to the canvas.  Rotate it 15 degrees to the right and place it on the right side and behind everything else.

C/P Element 104 on to the canvas.  Place it behind Element 148 on the left side.

C/P Element 112 on to the canvas.  Re size it by 65% once and place it on the right side of Element 104.

C/P Element 159 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.