Turn Back Time

Turn Back Time
©Barbara Butler
March 2014

Supplies:
Kit-Yesterday2 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84

C&P Element 51 on to the canvas.  Re size it by65% once.  Place it on the right side.

C&P Element 3 on to the canvas.  Re size it by 65%.  Place it on top of the branch.

C&P Tube of choice on to the canvas.  Re size it as needed.  If it is a sitting tube like mine place it on top of the flower if not place it to your liking. 

C&P Element 17 on to the canvas.  Place it behind the other elements on the right side.

C&P Element 22 on to the canvas.  Place behind the others.

C&P Element 52 on to the canvas.  Re size it by 65% once and place it behind the others.

C&P Element 68 on to the canvas.  Re size it by 50% once and place it on the left side of your tube.

C&P Element 76 on to the canvas.  Send it to the bottom and rotate it 15 degrees to the left.

Select all, add a new layer and paste Pp12 into the selection.  Apply the mask, but before you merge the mask group move it over to the right just a little bit. 

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Self Made

Self Made
©Barbara Butler
March 2014

Supplies:
Kit-Self Made by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C&P Element 72 on to the canvas.  Re size it by 65% once.  Click on the outside paste Pp39 as a new layer and hit the delete key.  Select none and move the paper below the heart.

C&P Element 75 on to the canvas.  Re size it by 65% once.  Place it on the left side and rotate it 15 degrees to the left twice.

C&P Element 93 on to the canvas.  Re size it by 75% once.  Place it behind Element 75.

C&P Element 56on to the canvas.  Re size it by 60% once.  Place it on the bottom left.

C&P Element 49 on to the canvas.  Re size it by 60% once.  Place it in front of Element 75.

C&P Element 20 on to the canvas.  Re size it by 60% once.  Place behind and to the right of the pig.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Spring Fantasy

Spring Fantasy
©Barbara Butler
March 2014

Supplies:
Kit-Easter Land by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-223mpm by Millies PspMadness.  This can be found at www.milliespspmadness.blogspot.com.

Open up the template and make sure its at 72 DPI.  Duplicate it and close the original template.  Re size the canvas to 950X755.  Delete the copyright layer.

Layer 3-Select all, float, defloat.  Paste Pp9 as a new layer.  Move it up so the bottom is in the selection, invert and hit the delete key.  Select none.  Close or delete the original layer.

Layer 2-Select all, float, defloat.  Paste Pp9 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 16-Select all, float, defloat.  Paste Pp12 into the selection, select none.

Layer 17-Select all, float, defloat.  Paste Pp10 into the selection, select none.

Layer 1-Select all, float, defloat.  Paste Pp1 into the selection, select none.

Layers 13&15-Select all, float, defloat.  Paste Pp4 into the selection, select none.

Layers 12&14-Select all, float, defloat.  Paste Pp16 as a new layer, invert the selection and hit the delete key.  Close or delete the original layer.

Layers 10&11-Select all, float, defloat.  Paste Pp22 into the selection, select none.

Layers 8&9-Select all, float, defloat.  Paste Pp20 into the selection, select none.

Layers 4&5-Select all, float, defloat.  Paste Pp21 into the selection, select none.

Layers 6&7-Select all, float, defloat.  Paste Pp19 into the selection, select none.

Word art-Select all, float, defloat.  Contract the selection by about 2.  Promote the selection to layer.  Paste Pp19 into the selection.  Back on the original>Select all, float, defloat>Paste Pp21 into the selection, select none.  Merge the two together.  Add a drop shadow of choice.

C&P Element 13 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C&P Element 46 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the left and place it on the top left and behind the word art.

C&P Element 48 on to the canvas.   Re size it by 75% once.  Place it on the bottom left.

C&P Element 56 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C&P Element 78 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

C&P Element 98 on to the canvas.  Re size it by 75% once.  Place it on the bottom left and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Welcomed

Welcomed
©Barbara Butler
March 2014

Supplies:
Kit-Welcomed by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C&P Element 82 on to the canvas.  Click on the inside with the magic wand, expand the selection by 2, add a new layer and paste Element 81 into the selection.  Move this below the frame and select none.

C&P Element 25 on to the canvas.  Re size it by 65% twice and place it on the bottom right.

C&P Element 27 on to the canvas.  Re size it by 65% once and place it behind Element 25.

C&P Element 35 on to the canvas.  Re size it by 65%on once.  Flip it horizontally and place it on the bottom left.

C&P Element 40 on to the canvas.  Re size it by 65% once and place it behind Element 35.

C&P Element 51 on to the canvas.  Re size it by 65% twice.  Place it beside Element 35. 

C&P Element 88 on to the canvas.  Re size it by 65% once and place it on the right side.

C&P Element 90 on to the canvas.  Re size it by 45% once.  Place it on the right and behind Element 88 and rotate it 15 degrees to the left.

C&P Element 123 on to the canvas.  Flip it horizontally and place it on the right side.

C&P Element 124 on to the canvas.  Re size it by 65% once.  Place it on the top of the frame.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Fresh Breeze

Fresh Breeze
©Barbara Butler
March 2014

Supplies:
Kit-Spring Treasure by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-238 by Millies Psp Madness.  This template can be found at www.milliespspmadness.blogspot.com

Open up template and check to make sure it is set at 72DPI.  Duplicate it and close the original layer.  Delete the copyright layer.  Re size the canvas to 900X771.

Layer 3-Select all, float, defloat.  Paste Pp13 into the selection.  Select none.

Layers 9&10-Select all, float, defloat.  Paste Pp10 as a new layer.  Invert the selection and hit the delete key.  Select none.  Close or delete the original layers.

Layers 7&8-Select all, float, defloat.  Paste Pp8 into the selection.  Select none.

Layers 5&6-Select all, float, defloat.  Paste Pp7 as a new layer.  Invert the selection and hit the delete key.  Select none.  Close or delete the original layers.

Layers 1&2-Select all, float, defloat.  Paste Pp9 as a new layer, invert the selection and hit the delete key.  Select none.  Close or delete the original layers.

Layer 4-Select all, float, defloat.  Paste Pp2 as a new layer, invert the selection and hit the delete key.  Select none.  Close or delete the original layer.

Word Art-With the magic wand click on the Green part.  Promote the selection to layer and flood fill with a dark color from the tag.  I used a dark blue.  Now back on the original layer select none and flood fill with a light color from the tag.  On the top part and a weave of choice.  Merge the two together.  Add a drop shadow with the following settings, V6, H6, Op.50, Blur2, black.

C&P Element 4 on to the canvas. Re size it by 65% once.  Place it on the left side of the word art and behind it.  Rotate it 15 degrees to the left.   Duplicate it, flip horizontally and place it on the right side.

C&P Element 11 on to the canvas.  Re size it by 65% twice.  Place it on the left side and down just a little bit of Element 4.

C&P Element 13 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C&P Element 12 on to the canvas.  Re size it by 75% once.  Place it behind the other elements.

C&P Element 37 on to the canvas.  Re size it by 65% once.  Move it over to the right just a little bit.

C&P Element 44 on to the canvas.  Re size it by 65% once.  Place it on the right side of the circle.

C&P Element 55 on to the canvas.  Re size it by 50% once.  Place it on the left side and behind the teapot.

C&P Element 49  on to the canvas.  Re size it by 50% once.  Place it on the right side of the bunny and behind it.

C&P Element 25 on to the canvas.  Leave right where it is.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Spring Chick

Spring Chick
©Barbara Butler
March 2014

Supplies:
Kit-Spring Chick by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-UptownGirl by Rissa's Designs.  This template can be found at http://rissasdesigns.blogspot.com.

Open up the template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Delete the copyright and word art layers.

Front Rectangle-Select all, float, defloat.  Paste Pp33 into the selection, select none.

Right and Left Flowers-Select all, float, defloat.  Paste Pp19 into the selection, select none.  Add a weave and inner bevel of choice.

Right Long Rectangl-Select all, float, defloat.  Paste Pp26 on to the canvas.  Invert the selection and hit the delete key.  Close or delete the original layer.  Select none.

Circle-Select all, float, defloat.  Paste Pp13 into the selection, select none.

Left Long Rectangle-Select all, float, defloat.  Paste Pp10 into the selection, select none.

C&P Element 9 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C&P Element 17 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C&P Element 21 on to the canvas.  Place it on top of the front rectangle.  Now go back to the top rectangle>select all, float, defloat.  Invert the selection and go back to the element and hit the delete key.  Duplicate it three times and merge them together.  Add a drop shadow of choice (just make sure the vertical is set a negative number).

C&P Element 24 on to the canvas. Re size it by 50% twice.  Place it on the left side of Element 17.  Flip it horizontally.

C&P Element 61 on to the canvas.  Re size it by 85% once.  Place it on the top.  Add a drop shadow of choice.

C&P Element 83 on to the canvas.  Re size it by 45% once.  Place it ontop of Element 61 and rotate it 15 degrees to the right.

C&P Element 108 on to the canvas.  Re size it by 45% once.  Flip it horizontally and place it on the top right.

C&P Element 123 on to the canvas. Re size it by 65% twice.  Place it on the bottom right of the top rectangle.

C&P Element 142 on to the canvas.  Re size it by 50% once.  Place it on the bottom left.

C&P Element 27 on to the canvas.  Place it on the bottom.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Colorful Spring

Colorful Spring
©Barbara Butler
March 2014

Supplies:
Kit-Colorful Spring by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL194

New Image 800X600 72DPI

C&P Element 193 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C&P Element 198 on to the canvas.  Re size it by 65% once.  Place it on the right side of Element 193.

C&P Element 197 on to the canvas.  Re size it by 65% twice.  Place it on the left side of Element 198.

C&P Element 177 on to the canvas.  Place it behind the elements on the left.  Duplicate, flip it horizontally, merge the two together.  Duplicate, flip it horizontally and move this one over to the right a just a little.

C&P Element 178 on to the canvas.  Place it on the bottom and behind the other elements.  Duplicate it, move duplicate over to the left, merge the two together.  Duplicate one more time and move this one over to the right.

C&P Element 112 on to the canvas.  Flip it horizontally and place it on the right side.

C&P Element 111 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C&P Element 72 on to the canvas.  Place it behind Element 193.

C&P Element 64 on to the canvas.  Re size it twice, once by 50% then by 65%.  Place it on top of Element 193.

C&P Element 37 on to the canvas.  Re size it by 65% twice.  Place it on the left side of Element 111.

C&P Element 12 on to the canvas.  Place it behind all the elements.  Re size it by 85% once.  Take the selection tool set on circle and draw a circe on the inside.  Add a new layer and paste Pp3 into the selection.  Select none.  Move this below the element.

Select all, add a new layer and paste Pp8 into the selection.  Select none.  Apply the mask and merge the mask group.  Place this behind everything else.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Spring Fling

Spring Fling
©Barbara Butler
March 2014

Supplies:
Kit-Spring Things by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C&P Element 1 on to the canvas.  Leave it in the middle.

C&P Element 6 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C&P Element 10 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the bottom right.

C&P Element 16 on to the canvas.  Re size it by 65% once.  Place it behind Element 10 on the right side.

C&P Element 15 on to the canvas.  Place it behind Element 6 on the left side.

C&P Element 17 on to the canvas.  Re size it by 50% once.  Place it on the bottom left and in front of the other elements.

C&P Element 179 on to the canvas.  Re size it by 65% once.  Place it on the right side and flip it horizontally.

C&P Element 175 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C&P Element 149 on to the canvas.  Place it on the bottom and behind the other elements.  To make it show up better add a gradient glow and drop shadow of choice.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Vintage Paris

Vintage Paris
©Barbara Butler
March 2014

Supplies:
Kit-Vintage Paris by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C&P Elemenbt 32 on to the canvas.  Select all, float, defloat, paste Pp13 on to the canvas.  Invert the selection and hit the delete key.  Select none and move the paper layer below the element.  Add an Inner Bevel with the following settings, #2, 3, 2, 3, 3, 5, 315, 50, 30.  Merge the two together.  Re size it by 65% once.  Rotate it 15 degrees to the left and place it on the left side.

C&P Element 34 on to the canvas. Re size it by 75% once.  Place it on the left side.

C&P Element 37 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C&P Element 69 on to the canvas. Re size it by 75% once.  Place it below everything else.  You might have to re size the other elements a little bit more.

C&P Element 82 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C&P Element 85 on to the canvas.  Place it on the right side and behind Element 82.

C&P Element 105 on to the canvas.  Resize it by 65% once.  Place it on the right side.

Back on Element 69 click the inside with the magic wand.  Expand the selection by 12 add a new layer and paste Element118 into the selection.  Move this below 69 and select none.

C&P Element 134 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the left and place on the right side.

C&P Element 170 on to the canvas.  Re size it by 50% twice.  Place it on the top.  Add a drop shadow of choice.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Free Bird

Free Bird
©Barbara Butler
March 2014

Supplies:
Kit-BikerChic4 by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI


C&P Element 70 on to the canvas.  Re size it by 75% once. 

C&P Element 83 on to the canvas.  Re size it by 75% once.  Place between Elements 70.  Click on the inside with the magic wand.  Expand the selection by 6.  Add a new layer and paste Pp2 into the selection, select none.  Move the paper below the flame.

C&P Element 15 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C&P Element 30 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C&P Element 42 on to the canvas.  Re size it by 65%.  Flip it horizontally and place it behind the elements on the left side.

C&P Element 75 on to the canvas. Re size it by 85% twice.  Place it on the top.

C&P Element 84 on to the canvas.  Re size it by 50% twice.  Place it on the top right.

C&P Element 86 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C&P Element 87 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right.  Place it behind Element 86.

C&P Element 100 on to the canvas. Re size it by 50% once.  Place it behind the elements on the right side.

C&P Element 134 on to the canvas.  Re size it by 50% once.  Rotate it 15 degrees to the left and place it on the top left.

C&P Element 146 on to the canvas.  Place it behind everything else.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Biker Girl

Biker Girl
©Barbara Butler
March 2014

Supplies:
Kit-BikerChic2 by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-TagTemplate108_Rosey.  This template can be found at http://jjtagtemplatesandmore.blogspot.com.

Open template and check to make sure it is at 72 DPI.  Duplicate it and close the original one.  Delete the copyright and tone layers.

Black Rectangle-Select all, float, defloat.  Paste Pp21 into the selection, select none.

Rectangle Fill(Blue)-Select all, float, defloat.  Paste Pp23 into the selection, select none.

Frame-Select all, float, defloat.  Paste Pp2 as a new layer.  Invert the selection and hit the delete key, select none.  Close or delete the original layer.  Select all, float, defloat, go to the frame fill layer and hit the delete key.

Frame Fill-Select all, float, defloat.  Paste Pp5 into the selection.  Move this above the frame layer (the last step), add an inner bevel and drop shadow of choice, select none.

Frames-Select all, float, defloat.  Paste Pp11 into the selection, select none.

Frame Fill(front rectangles)-Select all, float, defloat.  Paste Pp13 into the selection, select none.

Frames(front frames)-Select all, float, defloat.  Paste Pp10 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Black Frame Fill-Select all, float, defloat.  Paste Pp7 into the selection, select none.

Bottom Pink Rectangle-Select all, float, defloat.  Paste Pp9 into the selection, select none.

Bottom Rectangle-Select all, float, defloat.  Paste Pp7 into the selection, select none.

Delete the background layer.

For the frame layers add an inner bevel and a drop shadow of choice.

C&P Element 2 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C&P Element 3 on to the canvas.  Re size it by 50% once.  Place it on the left side.

C&P Element 6 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C&P Element 16 on to the canvas.  Re size it by 65% twice.  Place it on the left side.  Add a drop shadow of choice (use a light color like white or a light blue this way the element will pop out a little).

C&P Element 19 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C&P Element 55 on to the canvas.  Place it behind the elements on the right side.

C&P Element 64 on to the canvas.  Place it on left side and behind Element 16.  Flip it horizontally.

C&P Element 84 on to the canvas.  Re size it by 65% once.  Place it behind Element 16.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Born To Be Wild

Born To Be Wild
©Barbara Butler
March 2014

Supplies:
Kit-BikerChic2 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL194

New Image 800X600 72DPI

Select all, paste Pp23 into the selection, select none.  Apply the mask and merge the mask group. 

Select all, float, defloat.  Paste Element 9 as a new layer, invert the selection and hit the delete key.  Change the blend mode to Screen.

C&P Element 7 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C&P Element 8 on to the canvas.  Re size it by 65% once.  Place it behind the traffic light.

C&P Element 10 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C&P Element 31 on to the canvas.  Leave it right where it is at.

C&P Element 41 on to the canvas.  Re size it by 65% once.  Place it behind Element 10 on the right side.

C&P Element 44 on to the canvas.  Flip it horizontally and place it behind the elements on the right side.

C&P Element 54 on to the canvas.  Place it on the bottom and behind the other elements.

C&P Element 89 on to the canvas.  Place it on the bottom.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Biker Chic

Biker Chic
©Barbara Butler
March 2014

Supplies:
Kit-BikerChic by Amy Marie.  This kit can be found at www.amymarieskits.com


New Image 800X600 72DPI

C&P Elements 105 and 91 on to the canvas.  Re size both by 75% twice.  Place 105 on the right side and 91 on the left side.

Select all, add a new and paste Element 108 into the selection, select none.  Re size it by 75% once and place it behind the bikes.  Select the inside with magic wand, add a new layer and paste Pp11 into the selection.  Select none.  Move this below the frame.

C&P Element 127 on to the canvas.  Re size it by 75% twice.  Place it behind the bike on the right side.

C&P Element 154 on to the canvas.  Re size it by 75% once.  Place it behind the bike on the left side.

C&P Element 85 on to the canvas. Re size it by 75% once.  Place it behind the elements on the left side.

On the paper layer select all, float, defloat.  Add a new layer and paste Element 70 into the selection, select none.  Change the blend mode to Luminance (L).

C&P Element 69 on to the canvas.  Re size it by 75% once.  Place it in front of everything.

C&P Element 61 on to the canvas.  Flip it horizontally and place it behind the elements on the right side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.