Blue Christmas

Blue Christmas
©Barbara Butler
November 2014

Supplies:
Kit:  Blue Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  721 by Millies PSP Madness.

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and word art layers, and re size the canvas to a little bit bigger size.

Layer 9:  Select all, float, defloat.  Paste Pp9 into the selection, select none.

Layer 8:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

Layer 12:  Select all, float, defloat.  Paste Pp6 into the selection, select none.

Layers 6&7:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Layers 4&5:  Select all, float, defloat.  Paste Pp11 into the selection, select none.

Layes 1&2:  Select all, float, defloat.  Paste Pp17 into the selection, select none.

Layer 11:   Select all, float, defloat.  Paste Pp14 into the selection, select none.

C/P Element 4 on to the canvas.  Re size it by 45% once.  Place it on the bottom right.

C/P Element 10 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 19 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind the other elements.  Rotate it 15 degrees to the right.

C/P Element 20 on to the canvas.  Place it on the left side and behind the other elements.    Duplicate it, flip it horizontally and place it on the right side.

C/P Element 30 on to the canvas.  Re size it by 75% once.  Place it on the bottom and in front of the other elements.

C/P Element 39 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 53 on to the canvas.  Re size it by 45%  twice.  Place it on top of the branch anywhere you would like, I placed mine on the left side and duplicated it and place the duplicate over on the right side.

C/P Element 58 on to the canvas.  Re size it by 45% once.  Place it the middle of the branch (if you did what I did with Element 53 place it between the two).

C/P Element 54 on to the canvas.  Re size it by 45% once.  Place it on left side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sugar Cane

Sugar Cane
©Barbara Butler
November 2014

Supplies:
Kit:  Sugar Cane by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  720 by Millies PSP Madness.

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.  Re size the canvas to a little bit bigger size.

Layer 6:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

Layers 8&9:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp9 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp7 inot the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

C/P Element 2 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 1 on to the canvas.  Re size it by 75% three times.  Place it on the bottom right.

C/P Element 13 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of the other elements.

C/P Element 20 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C/P Element 52 on to the canvas.  Re size it by 65% once, then one more time by 75%.  Place it on the top.

C/P Element 57 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the left side and behind the other elements.

C/P Element 56 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the left side and in front of the other elements.

C/P Element 70 on to the canvas.  Re size it by 75% three times.  Place it on the right side and behind the globe.

C/P Element 66 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the left side and behind the other elements.  Duplicate it and move the duplicate over to the right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Be Merry

Be Merry
©Barbara Butler
November 2014

Supplies:
Kit:  Be Merry by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 84

New Image 800X600 72DPI

Select all, paste Pp25 into the selection, select none.  Appy the mask and merge the mask group.

C/P Element 13 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 41 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the left side.  Rotate it 15 degrees to the left.

C/P Element 62 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom left and in front of the other elements.

C/P Element 65 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind Element 13.

C/P Element 106 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 105 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the right side and behind Element 106.

C/P Element 113 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 128 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 134 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 143 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the cat.

C/P Element 165 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 131 on to the canvas.  Re size it twice, once by 65% then by 75%.  Flip it horizontally and place it on the left side and in front of the other elements.

C/P Element 166 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.  Duplicate it, flip the duplicate horizontally and place this one on the right side of the original.

C/P Element 21 on to the canvas.  Re size it by 75% twice.  Place it on the top of the window on the left.

C/P Element 158 on the canvas.  Place it on behind the windows.

C/P Element 159 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the other elements (except the window).

C/P Element 48 on to the canvas.  Re size it by 75% once.  Place it behind the left window.  Duplicate it, and move the duplicate to the right.

C/P Element 14 on to the canvas.  Re size it by 65% twice.  Place it on the top of the window on the right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Pepper Christmas

Pepper Christmas
©Barbara Butler
November 2014

Supplies:
Kit:  Pepper Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72 DPI.

C/P Element 52 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand, expand the selection by 6, add a new layer and paste Pp5 into the selection, select none.  Move the paper layer below the frame.

C/P Element 9 on to the canvas.  Re size it by 75% once.  Place it on the bottom.

C/P Element 8 on to the canvas.  Re size it twice, once by 65% then by 75%.  Place it on the bottom right and behind Element 9.

C/P Element 11 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind Element 9.

C/P Element 128 on to the canvas.  Re size it by 75% three times.  Place it on the left side and in front of the other elements.

C/P Element 72b on to the canvas.  Re size it by 65% three times.  Place it on the top and place it in the middle.

C/P Element 55 on to the canvas.  Re size it by 65% once.  Place it on the top and behind the other elements.

C/P Element 50 on to the canvas.  Re size it by 65% three times.  Place it on the top right and in front of the other elements.

C/P Element 47 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind Element 128.

C/P Element 10 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Fa La La La

Fa La La La
©Barbara Butler
November 2014

Supplies:
Kit:  Fa La La La by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 84

New Image 800X600 72 DPI

Select all, paste Pp1 into the selection, apply the mask and merget the mask group.

C/P Element 39 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand and expand the selection by 6.  Add a new layer and paste Pp5 into the selection, place the paper below the frame, select none.

C/P Element 22 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 23 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the right side.

C/P Element 55 on to the canvas.  Re size it by 65% twice.  Place it on the bottom and in front of the other elements.

C/P Element 64 on to the canvas.  Re size it by 65% twice.  Flip it horziontally and place it on the left side of Element 55.

C/P Elements 75, 76, 77 on to the canvas.  Place it on the top right and in any order you want.

C/P Element 119 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 128 on to the canvas.  Rotate it 15 degrees to the right, place it on the right side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas Old

Christmas Old
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas Old by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Wrapped Up by Dee.  You can fine the link to her site on the side.

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright, pixel words, and white strip layers.  Re size the canvas to a little bit bigger size for the elements.

Purple Rectangle:  Select all, float, defloat.  Paste Pp7 into the selection, select none.

Sparkles:  Change the color to a color of choice.

Mauve Circle:  Select all, float, defloat.  Paste Pp19 into the selection, select none.

Mauve Inside Frame:  Select all, float, defloat.  Paste Pp3 into the selection, select none.

Right and Left Black Rectangle:  Select all, float, defloat.  Paste Pp6 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 26 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Element 4 on to the canvas.  Re size it by 75% once.  Place it on the top right.

C/P Element 16 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and in front of Element 7.

C/P Element 18 on to the canvas.  Re size it by 65% twice.  Place it on the top.

C/P Element 29 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side and in front of the other elements.

C/P Element 42 on to the canvas.  Place it on the left side and behind the other elements.  Rotate it 15 degrees to the left.

C/P Element 67 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C/P Element 66 on to the canvas.  Flip it horiztonally, place it on the right side and behind Element 67.

C/P Element 74 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind the children.

C/P Element 96 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 76 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 6 on to the canvas.  Re size it by 75% twice.  Place it above the rectangle frames.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Elves

Elves
©Barbara Butler
November 2014

Supplies:
Kit:  Elves by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 194

New Image 800X600 72 DPI

Select all, paste Pp15 into the selection, apply the mask and merge the mask group.

C/P Element 2 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C/P Element 5 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind Element 2.

C/P Element 33 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 34 on to the canvas.  Place it on the bottom right.

C/P Element 39 on to the canvas.  Re size it by 65% twice.  Place it towards the top.

C/P Element 43 on to the canvas.  Re size it by 65% twice.  Place on the left side and in front of the other elements.

C/P Element 48 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the right side.

C/P Element 52 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 73 on to the canvas.  Re size it by 65% twice.  Place it towards the top left.

C/P Element 96 on to the canvas.  Re size it by 45% once.  Place it on the left side and in front of the other elements.

C/P Element 100 on to the canvas.  Re size it by 45% once.  Place it on the right and in front of the other elements.

C/P Element 103 on to the canvas.  Re size it by 45% once.  Place it on the right side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas Joy

Christmas Joy
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas Joy by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 84

New Image 800X600 72DPI.

Select all, paste Pp16 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 19 on to the canvas.  Re size it by 75% once.  Place it on the bottom and center in the middle.

C/P Element 11 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 33 on to the canvas.  Re size it by 65% twice.  Place it on the right side.

C/P Element 37 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind Element 33.

C/P Element 43 on to the canvas.  Re size it by 65% four times.  Place it on the top right of the fireplace.

C/P Element 81 on to the canvas.  Re size it by 65% twice.  Place it on the top left of the fireplace and behind it.

C/P Element 86 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements including the fireplace.

C/P Element 101 on to the canvas.  Re size it by 65% once.  Place it above the fireplace, center it.

C/P Element 107 on to the canvas.  Re size it by 65% twice.  Place it on the bottom and in front of the other elements.

C/P Element 1 on to the canvas.  Re size it twice, once by 45% then by 65%.  Place it on top of the firplace and between the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Winter Magic

Winter Magic
©Barbara Butler
November 2014

Supplies:
Kit:  Winter Magic by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 84

New Image 800X600 72 DPI.

Select all, and paste Pp6 into the selection, select none.  Apply the mask, merge the mask group.

C/P Element 84 on to the canvas.  Re size it by 75% once.

C/P Element 115 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 123 on to the canvas.  Rotate it 15 degrees to right and place it on the right side.

C/P Element 120 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the other elements.

C/P Element 101 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 86 on to the canvas.  Re size it by 75% once.  Place it on the right side and in front of the other elements.

C/P Element 79 on to the canvas.  Re size it by 75% twice.  Place it on the bottom and behind the other elements.  Duplicate it once and move the duplicate up just a little bit.

C/P Element 81 on to the canvas.  Place it on the right and behind all the other elements, duplicate it flip this one horiztonally and place it on the left side.

C/P Element 70 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place behind the other elements on the bottom.

C/P Element 66 on to the canvas.  Re size it by 75% once.  Place it behind the other elements but leave it in the center of the canvas.

C/P Element 4 on to the canvas.  Re size it by 75% three times.  Place it on top of the window.

C/P Element 112 on to the canvas.  Re size it by 75% three times.  Flip it horizontally and place it in front of the pine cones on the right side.

C/P Element 49 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the pinecones.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  C/P Element 49 on to the canvas one more time.  Place it on the bottom and behind some of the elements but in front of the tube.


Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sparkles

Sparkles
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas Sparkles by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72 DPI.

C/P Element 8 on to the canvas.  Re size it by 75% twice.  Place towards the bottom and center it.

C/P Element 7 on to the canvas.  Re size it by 65% twice then by 75%.  Place it on the top left.

C/P Element 5 on to the canvas.  Re size it by 65% twice then by 75%.  Place it on the top right.

C/P Element 2 on to the canvas.  Re size it by 65% twice.  Place it above the fireplace.  Click on the inside of the frame with the magic wand, expand the selection by 6, add a new layer and paste Pp14 into the selection, select none and move the paper below the frame.

C/P Element 14 on to the canvas.  Re size it by 65% four times.  Flip it horizontally and place it on the top right of the fireplace.

C/P Element 16 on to the canvas.  Re size it by 65% three times.  Place it on the top center of the fireplace.

C/P Element 30 on to the canvas.  Re size it by 65% three times.  Place it on the top left of the fireplace.  Duplicate it, flip it horizontally and place this one on the top right of the fire place.

C/P Element 36 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom right.

C/P Element 52 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 124 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind everything else.

C/P Element 127 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 23 on to the canvas.  Re size it by 75% twice.  Place it behind the frame on top.

C/P Element 3 on to the canvas.  Place it on the left side and behind everything else.

Optional:  Select all, add a new raster layer and paste Pp5 into the selection, apply WSL Mask 84 (or any mask of choice), merge group, keep selected and add a new layer and paste Pp2 into the selection, select none.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas For Elizabeth

Christmas For Elizabeth
©Barbara Butler
November 2014

Supplies:
Kit:  Elizabeth's Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com

Tube:  Elizabeth by Designs by Norella.  This tube can be found at www.designsbynorella.weeble.com
Mask:  WSL3

New Image 800X600 72 DPI

Select all, paste Pp15 into the selection, select none.  Apply the mask, merge the mask group.  Re size it by 85% twice.

C/P Tube on to the canvas.  Re size it to your liking.  Place it on the right side.

C/P Element 2 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the tube.

C/P Element 7 on to the canvas.  Re size it by 65% twice.  Place it on the right side.

C/P Element 6 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 11 on to the canvas.  Re  size it by 65% twice.  Place it on the left side and in front of Element 6.

C/P Element 12 on to the canvas.  Re size it by 65% three times.  Place it on the left side and in front of the other elements.

C/P Element 14 on to the canvas.  Re size it twice, once by 50% then by 65%.  Place it on the top left.

C/P Element 18 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and behind the other elements.

C/P Element 20 on to the canvas.  Re size it by 45% twice.  Place it on the left side and in front of the other elements.

C/P Element 27 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 33 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and in front of the other elements.

C/P Element 48 on to the canvas.  Re size it by 65% once.  Place it on the bottom and in front of the other elements.

C/P Element 51 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom right and in front of the other elements.

C/P Element 92 on to the canvas.  Re size it by 75% once.  Place it behind the other elements.  Take the magic wand and click on the inside.  Expand the selection by 7, add a new layer and paste Pp18 into the selection, select none.  Move the paper layer below the frame.

C/P Element 121 on to the canvas.  Re size it by 65% once.  Place it on the left of the frame and behind the other elements (not the frame).

C/P Element 144 on to the canvas.  Re size it by 65% twice.  Place it on the right side of the cat.

C/P Element 134 on to the canvas.  Place it on the left side of the frame and behind Element 121.

C/P Element 129 on to the canvas.  Re size it twice, once by 50% then by 65%.  Place it on the left side and in front of the other elements.

C/P Element 26 on to the canvas.  Re size it by 65% once.  Place on top of the other frame layer.

C/P Element 36 on to the canvas.  Re size it twice, once by 45% then by 65%.  Place it on the top right of Element 26.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Frosty

Frosty
©Barbara Butler
November 2014

Supplies:
Kit:  A Frosty Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 52

New Image 800X600 72 DPI.

Select all, paste Pp2 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C/P Element 18 on to the canvas.  Re size it by 75% twice.  Place it on the left side of Element 16.

C/P Element 34 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 36 on to the canvas.  Re size it by 65% three times.  Place it on the right side and in front of the other elements.

C/P Element 38 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 78 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 103 on to the canvas.  Leave it right where it is and behind the other elements.

C/P Element 127 on to the canvas.  Place it on the top and add a gradient glow of choice, I used a shade of blue.

C/P Element 136 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 158 on to the canvas.  Re size it by 65% three times.  Place it on the top left.

C/P Element 4 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind the other elements, except the trees.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas Girl

Christmas Girl
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas Girl by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL6

New Image 800X600 72DPI.

Select all, paste Pp21 on to the canvas.  Apply the mask and merge the group.  Duplicate it once.

C/P Element 6 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C/P Element 17 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of Element 6.

C/P Element 27 on to the canvas.  Place it on the bottom and behind Element 17.

C/P Element 45 on to the canvas.  Re size it twice once by 65% then by 75%.  Flip it horizontally and place it on the right side and in front of the other elements.

C/P Element 50 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side and in front of the other elements.

C/P Element 55 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 79 on to the canvas.  Re size it by 65% twice.  Place it on the left side of the reindeer on the right.

C/P Element 84 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

C/P Element 110 on to the canvas.  Re size it by 65% three times.  Place it on the right side and in front of the other elements.

C/P Element 139 on to the canvas.  Re size it by 65% once.  Place it towards the right and behind the other elements, except the reindeer.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas Eve

Christmas Eve
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas Eve by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Christmas Template 10 Tinsel by Dee.  You can fine the link to her site on the side.

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright, background and word art layers.  Re size the canvas to a bigger size for the elements.

Center Gold and Creme Circles:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

Top Right and Left Green Rectangles:  Select all, float, defloat.  Paste Pp3 into the selection, select none.

Top and Bottom Red Rectangle:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

Creme Squares:  Select all, float, defloat.  Paste Pp30 into the selection, select none.

Center Creme Strip:  Select all, float, defloat.  Paste Pp23 into the selection, select none.

Center Green Strip:  Select all, float, defloat.  Paste pp8 into the selection, select none.

Gold Oval:  Select all, float, defloat.  Paste Pp25 into the selection, select none.

Bottom Left and Green Rectangle:  Select all, float, defloat.  Paste Pp29 into the selection, select none.

C/P Element 4 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 3 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind Element 4.

C/P Element 11 on to the canvas.  Flip it horizontally and place it on the right side.

C/P Element 81 on to the canvas.  Re size it by 75% three times.  Flip it horizontally, place it on the left side and in front of the other elements.

C/P Element 19 on to the canvas.  Re size it by 75% once.  Place it on the top left.

C/P Element 26 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and behind the present.

C/P Element 88 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 98 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 129 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 123 on to the canvas.  Place it on the right side and behind the other elements except the snowmen.

C/P Element 124 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the right side and in front of the other elements.

C/P Element 90 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Santas Lady

Santa's Lady
©Barbara Butler
November 2014

Supplies:
Kit:  Santa's Lady by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  CM2012 by Dee.  You can fine the link to her site on the side. 

Open the template and check to make sure it is at 72DPI>Duplicate it and close the original>Delete the copyright layer>Re size the canvas to a little bit bigger size for the elements.

Blue Circle>Select all, float, defloat>Paste Pp7 into the selection>Select none.

Beige Square>Select all, float, defloat>Paste Pp14 into the selection>Select none.

Pink Circle>Select all, float, defloat>Paste Pp5 into the selection>Select none.

Purple Rectangle>Select all, float, defloat>Paste Pp1 into the selection>Select none.

Top and Bottom Beige Strip>Select all, float, defloat>Paste Pp13 into the selection>Select none.

Green and Pink Squares>Select all, float, defloat>Paste Pp9 into the selection>Select none.

White Circle>Select all, float, defloat>Paste Pp19 into the selection>Select none.

White Square>Select all, float, defloat>Paste Pp16 into the selection>Select none.

Green Frame Border>Select all, float, defloat>Paste Pp15 into the selection>Select none.

Small Blue Circles>Select all, float, defloat>Paste Pp21 into the selection>Select none>Merge this with the Circle Glass Overlay and Snowflakes layers, you will have to have the Glass Overlay selected first to do this.

Word Art Layers>Pretty Please, Select all, float, defloat Paste Pp15 as a new layer, invert the selection and hit the delete key, select none, close or delete the original>Sleigh White, Selecdt all, float, defloat, Paste Pp15 as a new layer again, invert the selection and hit the delete key, select none, close or delete the original>Sleigh Black, Select all, float, defloat, flood fill with a color from the tag, I used a shade of pink from mine>Just Once, repeat the same as the other two, add a gradient glow to this and the Pretty Please layers>Santa White, Select all, float, defloat, flood fill with a different color from your tag, I used a light blue>Leave the D/S Layers alone>Merge them all together, re size it by 75% three times, place it on the bottom right.

Back on the Beige Square Layer>Using the tube from the kit>C/P Tube on to the canvas>Re size it by 75% once>Move it over to the right just a little bit>Invert the selection, and using the eraser tool, and delete some of the bottom of the tube, not the legs though, this makes it look like the tube is sitting on the bottom of the layer.  You might need to re size the canvas again so her feet dont get cut off on the bottom.

C/P Element 1 on to the canvas>Re size it by 65% twice>Place it on the bottom left.

C/P Element 5 on to the canvas>Re size it by 65% twice>Place it on the left side of Element 1.

C/P Element 7 on to the canvas>Place it on the top left.

C/P Element 10 on to the canvas>Re size it by 75% three times>Place it on the right and in front of the other two elements on the left side.

C/P Element 21 on to the canvas>Re size it by 75% twice>Place it on the right side.

C/P Element 27 on to the canvas>Re size it by 75% once>Place it behind the elements on the left side>Rotate it 15 degrees to the left.

C/P Element 39 on to the canvas>Re size it by 75% three times>C/P Element 40 on to the canvas>Re size it by 65% three times>Place this on the right of the first one>Merge them together and re size it by 75% once>Place it on the right side.

C/P Element 52 on to the canvas>Re size it by 75% twice>Place it on the left side and behind Elements 5 and 10.

C/P Element 58 on to the canvas>Re size it by 75% once>Place it on the right side and behind the other elements.

C/P Element 62 on to the canvas>Re size it by 75% once>Place it on the bottom and behind the other elements.

C/P Element 70 on to the canvas>Place it on the bottom and in front of Element 62.

C/P Element 86 on to the canvas>Re size it by 65% twice>Place it on the right side and in front of the other elements.

C/P Element 88 on to the canvas>Place it on the left side and behind the other elements.

C/P Element 106 on to the canvas>Re size it by 65% once>Place it on the left side and in front of the other elements.

C/P Element 2 on to the canvas>Re size it by 65% once>Place it on the top>Add a gradient glow and a drop shadow of choice.

C/P Element 22 on to the canvas>Re size it by 65% once>Place it on the right side and beside the tube.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Holiday Things

Holiday Things
©Barbara Butler
November 2014

Supplies:
Kit:  Holiday Things by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  UIEW by Dee.  You can fine the link to her site on the side.

Open template and duplicate it>close the original>  Re size the canvas to a little bit bigger size (for the elements)>Delete the copyright and word art layers>You can either hide the background layer or delete it.

Green Oval>Select all, float, defloat>Paste Pp7 into the selection, select none.

White Oval&Rectangle>Select all, float, defloat>Paste Pp11 into the selection, select none.

Red Circle>Select all, float, defloat.  Paste Pp8 into the selection, select none.

Green Square>Select all, float, defloat>Paste Pp18 into the selection, select none.

Clear Bulb>Select all, float, defloat>Paste Pp6 into the selection, select none.

Stars>Select all, float, defloat>Paste Pp23 as a new layer, invert the selection and hit the delete key, select none>Close or delete the original layer.

C/P Element 4 on to the canvas>Re size it by 65% once>Place it on the left side.

C/P Element 3 on to the canvas>Re size it by 65% once>Place it on the right side.

C/P Element 9 on to the canvas>Re size it by 65% once>Place it on the right side and behind Element 3.

C/P Element 12 on to the canvas>Re size it by 65% once>Place it on the left and in front of the other elements.

C/P Element 30 on to the canvas>Re size it by 75% once>Flip it horizontally and place it on the right side and behind the other elements.

C/P Element 54 on to the canvas>Re size it by 75% once.  Place it on the top of the ornament.

C/P Element 80 on to the canvas>Re size it by 75% twice>Place to the right of the elements on the left side.

C/P Element 91 on to the canvas>Re size it by 75% twice>Place it on the top right.

C/P Element 116 on to the canvas>Rotate it 15 degrees to the left and place it behind the other elements on the left side.

C/P Element 131 on to the canvas>Re size it by 75% once>Place it on the right side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas Twist

Christmas Twist
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas Twist by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C/P Element 40 on to the canvas>Re size it by 85% once>Click on the inside with the magic wand>Expand by 7>Add a new layer and paste Pp17 into the selection, select none>Move the paper layer below the frame.

C/P Element 13 on to the canvas>Re size it by 75% three times>Place it on the left side.

C/P Element 81 on to the canvas>Re size it by 75% twice>Place it on the left side and behind the cat.

C/P Element 94 on to the canvas>Re size it by 75% three times>Place it to the left and in front of the first cat.

C/P Element 95 on to the canvas>Re size it by 75% twice.  Flip it horizontally and place it on the right side.

C/P Element 47 on to the canvas>Re size it by 75% once.  Place it on the right side and behind Element 95>Rotate it 45 degrees to the left.

C/P Element 29 on to the canvas>Re size it by 65% twice>Place it on the right side and behind Element 95.

C/P Element 27 on to the canvas>Re size it by 75% twice>Place it on the left side and behind the two cats.

C/P Element 8 on to the canvas>Re size it by 75% twice>Place it on the top left>Add a gradient glow of choice.

C/P Element 33 on to the canvas>Re size it by 65% once>Place it on the right side and behind the other elements (but not the branch)>Rotate it 15 degrees to the right>Duplicate it, flip horizontally and move over to the left of the original.

C/P Element 75 on to the canvas>Re size it by 65% twice>Place it on the top.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas 12

Christmas
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas 12 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 84

New Image 800X600 72 DPI.

Select all, paste Pp10 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 11 on to the canvas.  Re size it by 65% once.  Place it towards the bottom and center it in the middle. 

C/P Element 10 on to the canvas.  Re size it by 65% once.  Place it on the left side of the fireplace.

C/P Element 30 on to the canvas.  Re size it by 65% twice.  Place it on top of the fireplace and center it.

C/P Element 36 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the bottom right.

C/P Element 38 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 46 on to the canvas.  Re size it by 65% twice.  Place it on top of the fireplace and on the left side.

C/P Element 55 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the chair.

C/P Element 63 on to the canvas.  Re size it by 65% twice.  Place it on the top right corner of the fireplace.

C/P Element 86 on to the canvas.  Re size it by 65% twice.  Place it on the front of the fireplace.

C/P Element 114 on to the canvas.  Re size it by 65% three times.  Place it on the bottom right and in front of the other elements.

C/P Element 79 on to the canvas.  Re size it by 65% three times.  Place it on top left corner of the fireplace.

C/P Element 72 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the elements on the bottom.

C/P Element 9 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top right of the fireplace.

C/P Element 1 on to the canvas.  Re size it by 65% twice.  Place it to the left and behind the present in front of the chair.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas Baking

Christmas Baking
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas Baking by Amy Marie.  This kit can be found at www.amymarieskits.com


New Image 800X600 72DPI

C/P Element 64 on to the canvas.  Re size it by 75% once.  Click on the inside with the magic wand>Expand by 5>add a new layer>paste Pp28 into the selection and move this below the frame>select none.

C/P Element 12 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Elemetn 32 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 34 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other presents.

C/P Element 42 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind Element 12.

C/P Element 47 on to the canvas.  Re size it by 50% twice.  Place it on the bottom right and in front of the other presents.

C/P Element 48 on to the canvas.  Re size it by 50% once.  Place it on the right side and behind Element 32.

C/P Element 57 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 59 on to the canvas.  Re size it by 50% once.  Place it on the bottom left and behind Element 12.

Back on the paper layer>Select all, float, defloat>add a new layer and paste Element 72 into the selection>change opacity to Screen.

C/P Element 76 on to the canvas.  Re size it twice, once by 50% then by 65%.  Place it on the bottom right and in front of the other elements.

C/P Element 149 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and behind the mug.

C/P Element 161 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind Element 32.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas Ballerina

Christmas Ballerina
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas Ballerina by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  640 by Millies PSP Madness

Open template and check to make sure it is at 72DPI>Duplicate it and close the original>Delete the copyright layer.

Layer 1:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

Layers 2&3:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp3 into the selection, select none.

Layer 5:  Select all, float, defloat.  Paste Pp12 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layers 6&7:  Select all, float, defloat.  Paste Pp10 into the selection, select none.

C/P Element 8 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 7 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and in front of Element 8.

C/P Element 14 on to the canvas.  Re size it by 75% twice.  Place it on the top left.

C/P Element 49 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 69 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 86 on to the canvas.  Re size it by 75% once.  Place it in the center of the canvas and behind the other elements.

C/P Element 32 on to the canvas.  Re size it by 75% once.  Place it on the the top and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Midnight Christmas

Midnight Christmas
©Barbara Butler
November 2014

Supplies:
Kit:  Midnight Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  660 by Millies PSP Madness.  You can fine the link to her site on the side.

Open template and check to make sure it is at 72DPI.  Duplicate the template and close the original.  Delete the copyright layer.  Re size the canvas to a little bit bigger size.

Layer 3:  Select all, float, defloat.  Paste Pp15 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp6 into the selection, select none.

Layer 5:  Select all, float, defloat.  Flip Pp6 and paste it into selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp17 into the selection, select none.

Layers 6&7:  Select all, float, defloat.  Hit the delete key a couple of times and paste Pp6 into the selection, select none.  On Layer 7 flip the paper horizontally.

C/P Element 3 on to the canvas.  Re size it by 75% three times.  Place it on the bottom right side.

C/P Element 7 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C/P Element 16 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top right.

C/P Element 50 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the other elements.

C/P Element 61 on to the canvas.  Re size it by 65% once.  Place it on the rigth and behind the other elements and rotate it 15 degrees to the right.

C/P Element 76 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the top left.

C/P Element 80 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind the other elements.

C/P Element 96 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the puppies.

C/P Element 97 on to the canvas.  Re size it by 65% once.  Place it on the top left and behind the other elements.

C/P Element 85 on to the canvas.  Place it on the bottom and in front of Element 80.

C/P Element 74 on to the canvas.  Re size it by 65% once.  Place it on the left and behind the other elements.

C/P Element 46 on to the canvas.  Place it to your liking.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas Gift

Christmas Gift
©Barbara Butler
November 2014

Supplies:
Kit:  Christmas Gift by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 210

New Image 800X600 72DPI

Select all, paste Pp13 into the selection, select none.  Apply the mask and merge the group.

C/P Element 18 on to the canvas.  Re size it by 65% twice.  Place it on the top right.  Duplicate and place this one on the top left, flip this one horizontally.  Duplicate it one more time and place this one in the middle of the other two.

C/P Element 43 on to the canvas.  Re size it by 65% once.  Place it on the bottom.

C/P Element 44 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 48 on to the canvas. Re size it by 65% once.  Place it on the bottom right.

C/P Element 58 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the presents.  Duplicate it and move to the right side and place it behind the other elements.

C/P Element 4 on to the canvas.  Re size it by 65% once.  Place it on top of the fireplace.

C/P Elemengt 14 on to the canvas.  Place it on the top and in front of the other elements.

C/P Element 15 on to the canvas.  Re size it by 75% once.  Place it behind the cats on the right side.

C/P Element 39 on to the canvas.  Re size it by 75% once.  Place it on the top left.

C/P Element 65 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 97 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top right.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Tis The Season

Tis The Season
©Barbara Butler
November 2014

Supplies:
Kit:  Tis The Season by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL84

New Image 800X600 72DPI

Select all and paste Pp11 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 14 on to the canvas.  Re size it by 75% once.  Place it on the bottom.

Back on the paper layer, select all, float, defloat.  Add a new layer and paste Element 4 into the selection.  Add another new layer and paste Pp11 into the selection>change the blend mode to Luminance(L), select none.

C/P Element 5 on to the canvas.  Place to your liking.  And if you want you can erase some of it.

C/P Element 8 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind Element 14.

C/P Element 12 on to the canvas.  Re size it twice, once by 65% then by 75%.  Place it on the left side and in front of everything else.

Back on the paper layers>Select all, float, defloat>Paste Element 13 on to the canvas, invert the selection and hit the delete key>place this in front of everything else.

C/P Element 27 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the cat.

C/P Element 38 on to the canvas.  Re size it by 75% once.  Rotate 15 degrees to the left twice.  Place it on the right side and behind Element 14.

C/P Element 45 on to the canvas.  Re size it by 75% once.  Place it on the right side and in front of Element 38.

C/P Element 69 on to the canvas.  Re size it by 75% twice.  Place it on the right and in front of the other elements.

C/P Element 49 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom right and in front of the other elements.

C/P Element 73 on to the canvas.  Re size it by 65% once.  Place it on the right side and in between the two branches.

C/P Element 93 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of everything else.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Sweet Girl Christmas

Sweet Girl Christmas
©Barbara Butler
November 2014

Supplies:
Kit:  Sweet Girl Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

C/P Element 21 on to the canvas.  Click on the inside with the magic wand and expand the selection by 6.  Add a new layer and paste Pp15 into the selection, select none.  Place the paper below the frame.

C/P Element 2 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 17 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 36 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the top left.

C/P Element 71 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and in front of the candle.

C/P Element 72 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the bear.

C/P Element 87 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the candle.

C/P Element 91 on to the canvas.  Leave right where is.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  I didnt use a tube for this tag but you are free to use one if you would like.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Candy Cane

Candy Cane
©Barbara Butler
November 2014

Supplies:
Kit:  Candy Cane by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Christmas Template 11 by Dee.  You can fine the link on side.

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright, word art, and holy layers.  Re size the canvas to a little bit bigger size (so the elements will fit properly).  Close off the background layer on the bottom.

Top and Bottom Green Circles:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Top and Bottom Red Rectangles:  Select all, float, defloat.  Paste Pp10 into the selection, select none.

Red Center Shape:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

Left Creme Square:  Select all, float, defloat.  Paste Pp9 into the selection, select none.  Repeat this for the Top Creme Square Layer.  Flip it horizontally.

Gold Circle:  Select all, float, defloat.  Paste Pp19 into the selection, select none.

Gold Rectangles:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

Creme Rectangles:  Select all, float, defloat.  Paste Pp16 into the selection, select none.  Repeat this for the Small White Strips Layer.

Bottom and Top Gold Strips:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

C/P Element 5 on to the canvas.  Place it on the bottom left.  Rotate it 45 degrees to the left.

C/P Element 9 on to the canvas.  Place it on the right side.

C/P Element 22 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and to the left of Element 9.

C/P Element 25 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right and to the right of the candle.

C/P Element 32 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and to the right of Element 5.

C/P Element 38 on to the canvas.  Place it on the left side and in front of the other elements.

C/P Element 43 on to the canvas.  Re size it by 65% once.  Place it on the top left.

C/P Element 55 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the candle and ornament.

C/P Element 59 on to the canvas.  Re size it by 65% once.  Place it on the top right.

C/P Element 57 on the canvas.  Re size it by 65% once.  Place it on the right side and behind the cat.

C/P Element 91 on the canvas.  Re size it by 65% once.  Place it on the top and in front of the other elements.  Try to center it a little bit.

C/P Element 93 on to the canvas.  Place it on the left side and behind the other elements on the bottom.

C/P Element 19 on to the canvas.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Bright Christmas

Bright Christmas
©Barbara Butler
November 2014

Supplies:
Kit:  Bright Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL 84.

New Image 800X600 72DPI

Select all, and paste Pp25 into the selection, select none.  Apply the mask and merge the group.

C/P Element 128 on to the canvas.  Re size it by 75% once.  Place it on the right.  Rotate 15 degrees to the left.  Duplicate it, flip it horizontally and place the duplicate over to the left.

C/P Element 133 on to the canvas.  Re size it by 75% once.  Place it on the left side and in front of the Element 128.  Duplicate it, flip it horizontally and place this one on the right side.

C/P Element 113 on  to the canvas.  Re size it by 65% twice.  Place it towards the right and in front of the other elements.

C/P Element 115 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side of Element 113.

C/P Element 104 on to the canvas.  Re size it by 75% once.  Place it behind the other elements.  Click on the inside with the magic wand, add a new layer and paste Pp6 into the selection, select none.

Re size the first four elements by 85% once.  Place these on the bottom of the frame.

C/P Element 103 on to the canvas.  Re size it by 85% three times.  Place it on top of Element 104.

C/P Element 98 on to the canvas.  Re size it by 75% once. Place it on the right side and behind the other elements.  Rotate it 15 degrees to the right.

C/P Element 81 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top left.

C/P Element 78 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 77 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 80 on to the canvas.  Re size it by 65% three times.  Place it on the left side and behind the other present.

C/P Elemengt 74 on to the canvas.  Re size it by 75% three times.  Place it on the left side and behind the other two presents.

C/P Element 54 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the other elements.

C/P Element 44 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Orange Spice

Orange Spice
©Barbara Butler
November 2014

Supplies:
Kit:  Orange Spice by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  693 by Millies PSP Madness.  You can fine the link to her site on the side.

Tube:  Gingie by Designs by Norella

Open the template and check to make sure it is at 72DPI.  Duplicate the template and close the original.  Delete the copyright layer.  Re size the canvas to a bigger size so the elements will fit.

Layer 15:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Layer 14:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

Layer 13:  Select all, float, defloat.  Paste Pp7 into the selection, select none.

Layers 7&8:  Select all, float, defloat.  Paste Pp11 into the selection, select none.

Layers 3&4:  Select all, float, defloat.  Paste Pp22 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 10:  Select all, float, defloat.  Paste Pp12 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layers 1&2:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

Layers 11&12:  Select all, float, defloat.  Paste Pp19 into the selection, select none.

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 10 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 12 on to the canvas.  Re size it by 75% once.  Place it on the bottom right and behind Element 10.

C/P Element 15 on to the canvas.  Re size it by 75% once.  Place it on the bottom left and behind Element 3.

C/P Element 22 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom left and in front of the other elements.

C/P Element 24 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 29 on to the canvas.  Re size it by 65% once.  Place it on the top right.

C/P Element 66 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 67 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 73 on to the canvas.  Re size it by 65% three times.  Place it on the bottom left and behind the cup.

C/P Element 124 on to the canvas.  Place it on the elements and behind the other elements.

C/P Element 126 on to the canvas.  Re size it by 65% twice.  Place it to the right and behind the elements on the left side.

C/P Element 86 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 25 on to the canvas.  Re size it by 65% twice.  Place it on the bottom and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Pointsetta

Pointsetta
©Barbara Butler
November 2014

Supplies:
Kit:  Pointsetta by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Wrapped  Up by Dee.  You can fine the link to her site on the side.

Open template and check to make sure it is at 72 DPI.  Duplicate the template and close the original.  Delete the copyright layer.  Re size the canvas to a bigger size for the elements.

Mauve Circle:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Purple Rectangle:  Select all, float, defloat.  Paste Pp25 into the selection, select none.

Right and Left Black Rectangles:  Select all, float, defloat.  Paste Pp22 into the selection, select none.

Mauve Inside Frame:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Sparkles:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

White Backgrounds (behind the other layers):  Select all, float, defloat.  Paste Pp8 into selection and select none.  On the white strip take the eraser tool and erase any that is outside.

Pixel Word Art:  Select all, float, defloat.  Paste Pp 20 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 13 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C/P Element 20 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

C/P Element 22 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 23 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the top left.

C/P Element 25 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 26 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 31 on to the canvas.  Re size it by 75% three times.  Place it on the top.

C/P Element 47 on to the canvas.  Re size it by 65% twice.  Place it on the top left and behind Element 23.

C/P Element 44 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side of Element 13.

C/P Element 60 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and behind the other elements.

C/P Element 73 on to the canvas.  Place it on the right side and behind everything but the glass.

C/P Element 53 on to the canvas.  Re size it by 65% twice.  Place it on the right side of the cat.

C/P Element 27 on to the canvas.  Re size it by 65% twice.  Place it on the bottom and behind the cat.

C/P Element 1 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.