Berry Christmas

Berry Christmas
©Barbara Butler
October 2014

Supplies:
Kit-Berry Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL194

New Image 800X600 72 DPI. 

Select all and paste Pp20 into the selection.  Apply the mask and merge group.

C/P Element 6 on to the canvas.  Using the magic wand click on the inside and expand the selection by 5.  Add a new layer and paste Pp20 into the selection.  Keep selected and paste Element 3 on to the canvas.  Re size it by 65% once.  Invert the selection and hit the delete key, select none.

C/P Element 7 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 13 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 17 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of the other elements.

C/P Element 20 on to the canvas.  Place it on the left side and in front of the other elements.

C/P Element 23 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

C/P Element 71 on to the canvas.  Re size it by 65% once.  Place it on the top left.

C/P Element 84 on to the canvas.  Place it on the top and behind the other elements.

C/P Element 89 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 91 on to the canvas.  Re size it by 65% twice.

C/P Element 123 on to the canvas.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Gingie

Gingie
©Barbara Butler
October 2014

Supplies:
Kit-Gingie by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  458 by Millies PSP Madness
Tube Gingie from Designs by Norella.  You can fine it at www.designsbynorella.weebly.com

Open template and check to make sure it is at 72 DPI.  Duplicate and close the original.  Delete the copyright snowflakes and word art layers.  Re size the canvas to a bigger size.

Layer 7:  Select all, float, defloat.  Paste Pp13 into the selection, select none.

Layer 6:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Layers 4&5:  Select all, float, defloat.  Paste Pp10 into the selection, select none.  Repeat this for Layer 8.

Layers 2&3:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp6 into the selection, select none.

C/P Element 2 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and rotate it 15 degrees to the left.

C/P Element 55 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 121 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

C/P Element 65 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the tree.

C/P Element 47 on to the canvas.  Re size it by 65% once.  Place it on the right side and in front of the other elements.

C/P Element 41 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it behind Element 65 on the right side.

C/P Element 36 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the right side and in front of the other elements.

C/P Element 23 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 5 on to the canvas.  Re size it by 65% once.  Place it on the top.

C/P Element 1 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side.

C/P Element 26 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Country Christmas

Country Christmas
©Barbara Butler
October 2014

Supplies:
Kit-Country Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  463 by Millies PSP Madness.  You can fine the link over on the side

Open up template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Delete the copyright layer.

Layers 9&10:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

Layer 7:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Layers 1&2:  Select all, float, defloat.  Paste Pp7 into the selection, select none.

Layers 5&6:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp17 into the selection, select none.

Laye 4:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

Layer 8:  Select all, float, defloat.  Paste Pp11 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Elements 5-7 on to the canvas.  Re size each by 75% once, and place them beside each other.  Merge the three together and re size it by 75% three times.  Place it on the bottom left.

C/P Element 25 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C/P Element 27 on to the canvas.  Re size it by 75% twice.  Place it on the top left.

C/P Element 43 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.

C/P Element 53 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 59 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the top right.  Rotate it 15 degrees to the left.

C/P Element 75 on to the canvas.  Re size it by 65% twice.  Place it on the top.

C/P Element 112 on to the canvas.  Place it where you would like.

C/P Element 123 on to the canvas.  Re size it by 65% once.  Place it on the top left and in front of Element 27.  Erase any part of it that hangs a little bit over the ornament.

C/P Element 14 on to the canvas.  Re size it by 65% twice.  Place it on the bottom and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Clarice

Clarice
©Barbara Butler
October 2014

Supplies:
Kit-Clarice by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Template is by Dee.  You can fine the link to her site over on the side.
Tube:  Clarice by Designs by Norella.  This tube can be found at http://designsbynorella.blogspot.com

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and word art layers.

Blue Circle:  Select all, float, defloat.  Paste Pp13 into the selection, select none.

Beige Square:  Select all, float, defloat.  Paste Pp17 into the selection, select none.

Green Square:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Purple Rectangle:  Select all, float, defloat.  Paste Pp19 into the selection, select none.

Pink Square:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

Top and Bottom Beige Strip:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

White Circle:  Select all, float, defloat.  Paste Pp1 into the selection, select none.  Repeat for White Square.

Pink Square:  Select all, float, defloat.  Paste Pp6 into the selection, select none.

Small Blue Circle:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

C/P Element 5 on to the canvas.  Re size it by 65% once.  Place it on the left side.

C/P Element 7 on to the canvas. Re size it by 65% once.  Flip it horizontally and place it on the top right.

C/P Element 8 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Element 11 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 20 on to the canvas.  Re size it by 65% once.  Place it to your liking and add a gradient glow and drop shadow of choice.

C/P Element 28 on to the canvas.  Re size it by 65% once.  Place it on the bottom and behind the other layers.  Rotate it 15 degrees to the right and add a gradient glow of choice.

C/P Element 54 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 79 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the other elements.  Add a gradient glow of choice.

C/P Element 87 on to the canvas.  Re size it by 65% once.  Place it on the bottom and behind the other elements.

C/P Element 93 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C/P Element 95 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements except the wreath.

C/P Element 97 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Christmas Dessert

Christmas Dessert
©Barbara Butler
October 2014

Supplies:
Kit-Christmas Dessert by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Temp117 by Leah.  This template can be found at http://amyleahsgimptastictuts.blogspot.com

Open template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright and word art layers.  Re size the canvas to a 870 width, the height will adjust itself.

Diamond:  Select all, float, defloat.  Paste Pp13 into the selection, select none.

Rect:  Select all, float, defloat.  Paste Pp6 into the selection, select none.

Circles 1&2:  Select all, float, defloat.  Paste Pp22 into the selection, select none.

Squares 1&2:  Select all, float, defloat.  Paste Pp25 into the selection, select none.

Thin Rect:  Select all, float, defloat.  Paste Pp19 into the selection, select none.

C/P Element 3 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 5 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

C/P Element 13 on to the canvas.  Place it on the right side and behind Element 3.

C/P Element 18 on to the canvas.  Re size it by 65% three times.  Place it on the bottom left.

C/P Element 23 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 31 on to the canvas.  Re size it by 65% once.  Place it on the bottom.

C/P Element 30 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the shoe.

C/P Element 46 on to the canvas.  Re size it by 65% once.  Place it on the bottom and behind Element 31.

C/P Element 47 on to the canvas.  Re size it by 65% twice.  Place it on the left side of Element 46.

C/P Element 67 on to the canvas.  Re size it by 65% twice.  Place it on the top left and in front of the ornaments.

C/P Element

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Winter Mint

Winter Mint
©Barbara Butler
October 2014

Supplies:
Kit-Minty Winter by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  GemMasks174

New Image 800X600 72DPI

Select all and paste Pp6 into the selection, select none.  Apply the mask and merge the mask group.  Re size it by 85% once.

C/P Element 13 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 29 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.

C/P Element 26 on to the canvas.  Re size it by 75%once.  Flip it horizontally and place it on the bottom left.

C/P Element 41 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 42 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 46 on to the canvas.  Re size it by 65% once.  Place it on the top left and behind the other elements.

C/P Element 49 on to the canvas.  Re size it by 45% once.  Place it on the right side of the snowman.

C/P Element 65 on to the canvas.  Re size it by 85% once.  Place it on the left side and behind the other elements.

C/P Element 67 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 70 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 83 on to the canvas.  Re size it by 75% twice.  Place it on the bottom and in front of the other elements.

C/P Element 97 on to the canvas.  Place it on the bottom left and in front of the other elements.

C/P Element 99 on to the canvas.  Place it on the top and behind the other elements.  Add a gradient glow using a dark green from the tag.  Add a drop shadow with the following settings:  Vertical 3, Horizontal 2, Opacity 75, Blur 6, Color #d2e1cc

C/P Element 109 on to the canvas.  Place it on the bottom and behind some of the elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Love Christmas

Love Christmas
©Barbara Butler
October 2014

Supplies:
Kit-Love Christmas by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  456 by Millies PSP Madness

Open the template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Re size the canvas to a 800 width the height will adjust itself.  Delete the copyright and layers.

Layers 7&8:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Layers 4&5:  Select all, float, defloat.  Paste Pp3 into the selection, select none.

Layers 2&3:  Select all, float, defloat.  Paste Pp10 into the selection, select none.

Layer 6:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

C/P Element 5 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

C/P Element 12 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind Element 5.

C/P Element 11 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 20 on to the canvas.  Re size it by 75% twice.  Rotate it 45 degrees to the left.  Place it to the right and behind the snowman.

C/P Element 25 on to the canvas.  Re size it by 75% once.  Place to the left and behind the snowman.

C/P Element 52 on to the canvas.  Re size it by 65% once.  Place it on the left side and in front of the other elements.

C/P Element 53 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 61 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

C/P Element 78 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and behind the candle stick.

C/P Element 87 on to the canvas.  Re size it by 65% once.  Place it on the top.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Frozen

Frozen
©Barbara Butler
October 2014

Supplies:
Kit-Frozen by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  445 by  Millies PSP Madness.  You can fine the link to her site on the side.

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.

Layer 6:  Select all, float, defloat.  Paste Pp21 into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp10 into the selection, select none.

Layer 5:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp17 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp20 into the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp19 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Layer 9:  Select all, float, defloat.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this step for Layers 7&8.

Back on Layer 5 select all, float, defloat.  Add a new layer and paste Element 2 into the selection, select none.  Add a drop shadow with the following settings:  Vertical -2, Horizontal -2, Opacity 69, Blur 6, Color #2d4a5c.

C/P Element 5 on to the canvas.  Re size it by 85% once.  Flip it horizontally and place it on the left side.

C/P Element 18 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind Layer 4.

Back on Layer 3:  Select all, float, defloat.  Paste Element 19 as a new layer, move where it is on top of the paper, invert the selection and hit the delete key, select none.

C/P Element 38 on to the canvas.  Take the selection tool and draw a rectangle around one of them, cut it out and paste it back on to the canvas.  Re size them both by 65% once.  Place the left one on the top left and the right one on the top right.

C/P Element 36 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.  Place it where the word art layer is on top.

C/P Element 42 on to the canvas.  Place it on the top left and behind the other elements.

C/P Element 65 on to the canvas.  Re size it by 75% once.  Place it on the bottom and in front of the other elements.

C/P Element 97 on to the canvas.  Re size it by 45% once.  Place it on top of the scenery paper.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Winter Wedding

Winter Wedding
©Barbara Butler
October 2014

Supplies:
Kit-Winter Wedding by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  Gems Masks 171

New Image 800X600 72DPI

Select all, and paste Pp25 into the selection, keep selected.  Add a new layer and paste Pp19 into the selection, select none.  Change the blend mode to Screen, duplicate it and change the blend mode on this one to Overlay.  Merge Visible and apply the mask, merge the mask group.  Duplicate it twice and merge all three together.  Re size it by 85% twice.

C/P Element 5 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 4 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the top right.

C/P Element 2 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side and in front of the other elements.

C/P Element 19 on to the canvas.  Re size it by 75% three times.  Flip it horizontally and place it on the top left.

C/P Element 30 on to the canvas.  Re size it by 75% once.  Place it on the right side.  Rotate it 15 degrees to the right.

C/P Element 33 on to the canvas.  Re size it by 75% twice.  Place it on the left side and in front of the other elements.

C/P Element 42 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

C/P Element 43 on to the canvas.  Re size it by 65% twice.  Place it on the left side of Element 42.

C/P Element 56 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.  Duplicate it and place this one  on the left side.

C/P Element 62 on to the canvas.  Re size it by 75% once.  Move it down just a little bit.

C/P Element 66 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 74 on to the canvas.  Place it on the top left and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Winter Wool

Winter Wool
©Barbara Butler
October 2014

Supplies:
Kit-Winter Wool by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  GemsMasks 173

New Image 800X600 72DPI.

Select all, paste Pp8.  Apply the mask and merge the mask group.  Re size it by 85% once.

C/P Element 4 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 25 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the right side.  Duplicate it twice and merge the three together.  Add a drop shadow with the following settings:  Vertical 2, Horizontal 2, Opacity 50, Blur 2, Color #010c08.

C/P Element 33 on to the canvas.  Place it on the left side and behind the other elements.  Duplicate it three times and merge them all together.  Re size it by 75% once.

C/P Element 49 on to the canvas.  Flip it horizontally and place it on the bottom and in front of Element 25.

C/P Element 59 on to the canvas.  Place it on top right and behind the other elements.  Duplicate it twice and merge all the three together.

C/P Element 67 on to the canvas.  Re size it by 75% once.  Place it on the right and place the bottom of it behind the elements on the bottom.  If Element 59 ends up in front of it move it below it.

C/P Element 69 on to the canvas.  Re size it by 75% twice.  Place it on the right side and in front of Element 67.

C/P Element 73 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C/P Element 79 on to the canvas.  Re size it by 65% once.  Place it on the left side of Element 73.

C/P Element 119 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 126 on to the canvas.  Re size it by 65% twice.  Place it on the right side of the snowman.

C/P Element 127 on to the canvas.  Re size it by 65% twice.  Place it on the bottom and in front of the other elements.  Add a drop shadow with the following settings:  Vertical 3, Horizontal 3, Opacity 73, Blur 2, Color the same as before.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Winter Comfort

Winter Comfort
©Barbara Butler
October 2014

Supplies:
Kit-Winter Comfort by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-  WSL208
Tube:  Hot Tea by Trinita.  You can fine this tube at Pics For Design and you can fine the link over on the side. 

New Image 800X600 72DPI.

Select all and paste Pp16 on to the canvas.  Apply the mask and merge the mask group.  Duplicate it once, and merge the two together.

If you are using the same tube as I am paste this on the canvas now and re size it by 65% three times.  If you are not depending on the tube you can save this step for last.  You can also pick what color layers to use and if you want to use the cat layers or not.

C/P Element 35 on to the canvas.  Place it on the right side and behind the tube.

C/P Element 34 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the tube.  Duplicate it and move this one down to the left just a little bit.

C/P Element 43 on to the canvas.  Place it on the bottom and behind the tube.

C/P Element 45 on to the canvas.  Re size it by 75% once.  Place it behind the other elements.

C/P Element 44 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind the other elements.  Add a drop shadow with the following settings:  Vertical 2, Horizontal 3, Opacity 65, Blur 5, Color #07382e.

C/P Element 49 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it in front of the elements on the left side.  Add the same drop shadow as the last step.

C/P Element 60 on to the canvas.  Place it behind the other elements.

C/P Element 69 on to the canvas.  Re size it by 75% once.  Place it in front of Eement 60.

Add some drop shadows to the elements.  You can use the same settings as before or any setting you would like.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Snowflake

Snowflake
©Barbara Butler
October 2014

Supplies:
Kit-Snowflake by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  700 by Millies PSP Madness.  You can fine a link to her blog on the side.

Open up the template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Delete the copyright layer.  Re size the canvas to a 900 width the height will adjust itself.

Layers 7&8:  Select all, float, defloat.  Paste Pp6 into the selection, select none.

Layer 9:  Select all, float, defloat.  Paste Pp 10 into the selection, select none.

Layers 1&2:  Select all, float, defloat.  Paste Pp24 into the selection, select none.

Layer 10:  Select all, float, defloat.  Paste Pp21 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this for Layer 11.

Layers 5&6:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

Layers 3&4:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Layer 13:  Select all, float, defloat.  Paste Pp5 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

C/P Element 9 on to the canvas.  Re size it by 75% once.  Place it on the left side.

C/P Element 19 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 25 on to the canvas.  Re size it by 75% once.  Place it on the right side.

C/P Element 111 on to the canvas.  Re size it by 75% three times.  Place it on the top right.

C/P Element 116 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind Element 19.

C/P Element 103 on to the canvas.  Re size it by 75% once.  Place it on the top left and behind the other elements.

C/P Element 73 on to the canvas.  Place it towards the top.

C/P Element 41 on to the canvas.  Place it towards the bottom and behind the other elements.  Duplicate it twice.  Move one over to the left and the other to the right.  Merge the three together and place it behind everything else.

C/P Element 29 on to the canvas.  Place it on the right side and behind the angel.

C/P Element 24 on to the canvas.  Re size it by 75% twice.  Flip it horizontally and place it on the top left.

C/P Element 1 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left and in front of the other elements.

On the word art layer add a gradient glow using a dark blue from the tag and move it down to the bottom.  Add a drop shadow of choice.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add drop shadows to some of the elements and the tube.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Winter Fairyland

Winter Fairyland
©Barbara Butler
October 2014

Supplies:
Kit-Winter Fairyland by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  463 by Millies PSP Madness.  You can fine the link to her site on the side.

Open template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Delete the copyright layer.  Re size the canvas to 800X600 (do not have the lock aspect ratio clicked), repeat this but this time have the lock aspect ratio clicked and change the width to 900 and the height will change itself.

Layer 4:  Select all, float, defloat.  Paste Pp7 into the selection, select none.

Layers 1&2:  Select all, float, defloat.  Paste Pp9 into the selection, select none.

Layers 7&8:  Select all, float, defloat.  Paste Pp15 as a new layer, invert the selection and hit the delete key, select  none.  Close or delete the original layers.

Layers 5&6:  Select all, float, defloat.  Paste Pp17 into the selection, select none.  

Layers 9&10:  Select all, float, defloat.  Paste Pp7 into the selection, select none.  On Layer 10 after you select none flip this one horizontally.

C/P Element 3 on to the canvas.  Re size it by 75% once.  Place it on the bottom.  Add a drop shadow with the following settings:  V&H 2, Opacity:  50, Blur 7, Color #2f1b63

C/P Element 13 on to the canvas.  Re size it by 75% twice.  Place it behind Element 3.  Add the same drop shadow as before.  Repeat the same drop shadow.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Place it on the right side and in front of the other elements.

C/P Element 17 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.  Add the same drop shadow as before but change the opacity to 75.

C/P Element 26 on to canvas.  Re size it by 75% once.  Place it on the bottom right and in front of the other elements.

C/P Element 27 on to the canvas.  Place it on the right side and in front of the other elements.

C/P Element 37 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 46 on to the canvas.  Re size it by 75% once.  Place it on the bottom and in front of the fence.  Add the same drop shadow as before but this time change the color to #1e1e1e.  Repeat the drop shadow and change the V&H to a -2.

C/P Element 71 on to the canvas.  Re size it by 65% once.  Place it on the top left.  Add a drop shadow with the following settings:  Vertical 4, Horizontal 5, Opacity 75, Blur 7, Color #1e1e1e

C/P Element 75 on to the canvas.  Place it on the right side and behind the other elements.  Add the same drop shadow as the last step.

C/P Element 134 on to the canvas.  Re size it by 75% once.  Place it on the bottom left. 

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Winter Fun

Winter Fun
©Barbara Butler
October 2014

 Supplies:

Kit-Winter Fun by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL362

New Image 800X600 72 DPI.

Select all, paste Pp1 into the selection.  Apply the mask and merge the group.  Duplicate it three times for a total of four layers.  Merge them all together.

C/P Element 4 on to the canvas.  Place it on the right side.  Rotate it 15 degrees to the right.

C/P Element 12 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 14 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the right side and in front of Element 4.

C/P Element 18 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the left side and behind Element 12.

C/P Element 35 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind the other elements.

C/P Element 40 on to the canvas.  Re size it by 75% twice.  Place it on bottom right and in front of the other elements.

C/P Element 42 on to the canvas.  Place it on the right and behind the penguin.

C/P Element 43 on to the canvas.  Leave it right where it is.  Duplicate it and flip the duplicate horizontally.

C/P Element 61 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 74 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the right side and behind the other elements.

C/P Element 97 on to the canvas.  Place it towards the top.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Ice Cutie

Ice Cutie
©Barbara Butler
October 2014

Supplies:
Kit-Ice Cutie by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  458 by Millies PSP Madness.  You can fine a link to her site on the side.
Plugin:  EyeCandy 4000 Gradient Glow

Open the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.

Layers 4&5:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Layer 7:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

Layer 6:  Select all, float, defloat.  Paste Pp4 into the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp22 into the selection, select none.

Layers 2&3:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

Layer 9:  Select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.
Layer 10:  Select all, float, defloat.  Paste Pp8 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Merge the two together and move them where you would like.  I moved mine to the top right.  Add a gradient glow of choice.  My settings where 3 under the basic, and I used the following colors: #1c3752, #1c3752, #9ff4fc.  Move the sliders to your liking, use the darker color for the first two sliders and the ligther one will be out to the right of the middle one so it is on the outside of the word art.  Add a drop shadow with the following settings:  V 3, H 1, Opacity 73, Blur 2, Color #1c3752.

Layers 8, 11, &12:  Select all, float, defloat.  Paste Pp4 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.  Add a drop shadow to the snowflake layers.  Move the bottom right snowflake to the top left with the other one.

C/P Element 6 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom left.  Add a drop shadow with the following settings  V&H2, Opacity 50, Blur 2, Color #1c3752.  Repeat the drop shadow but change V&H to a -2.

C/P Element 20 on to the canvas.  Re size it by 65% once.  Place it on bottom right.  Add a drop shadow with the same settings as the word art layers.

C/P Element 43 on to the canvas.  Re size it by 50% once.  Place it on the bottom left and behind Element 6.

C/P Element 51 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 50 on to the canvas.  Re size it by 65% twice.  Flip i horizontally, place it on the left side and in front of the other elements.

C/P Element 67 on to the canvas.  Re size it by 65% once.  Place it to the left and behind the other elements on the bottom right.  Duplicate it and flip it horizontally.  Move this one over to the right of the other elements.  Merge the two together and re size it by 75% twice.  Place it in front of Element 20.

C/P Element 75 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 85 on to the canvas.  Re size it by 65% once.  Place it on the bottom and in front of the other elements.

C/P Element 86 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the other elements.

C/P Element 91 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind the other elements.

C/P Element 102 on to the canvas.  Re size it by 65% once.  Place it on the bottom and behind the other elements.

C/P Element 116 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind the other elements.  Duplicate it and move this one over to the left.

C/P Element 114 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side and in front of the other elements.

C/P Element 140 on to the canvas.  Place it on the left side and place it behind everything else.  Duplicate it, flip it horizontally and place this one on the right side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Bright Dahlia

Bright Dahlia
©Barbara Butler
October 2014

Supplies:
Kit-Dahlia Bright by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  Mask 41 by Mistress V.  I dont remember where I got this mask from so if anyone has a link to it and is willing to give it to me, I would appreciate it.  If you dont have this mask please feel free to use any that you have.
Plugin:  MuRa Miester's Copies

New Image 800X600 72DPI

Select all, paste Pp15 into the selection, select none.  Apply the mask and merge group.  Re size it by 75% once.  Select all, float, defloat.  Selections:  Modify, Select Selection Border, Expand by 9 Outside checked, add a new layer and flood fill with a pink color, I used the following shade #F19375

C/P Element 3 on to the canvas.  Re size it by 75% three times.  Place it on the bottom left.

C/P Element 4 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and behind the slippers.

C/P Element 12 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom left.

C/P Element 25 on to the canvas.  Re size it by 75% three times.  Place it on the bottom left and behind the ballet slippers.

C/P Element 30 on to the canvas.  Re size it by 75% twice.  Apply Mura's Meister's Copies with the following settings:  Encircle, Number 12, Shift X 59, and Shift Y 69 the rest at default settings.  Place it behind the other elements and re size it by 85% once.

C/P Element 32 on to the canvas.  Flip it horizontally and place it on the bottom right.

C/P Element 56 on to the canvas.  Re size it by 65% three times.  Apply Mura's Copies using the following settings:  Encircle, Number 5, Shift X 54, Shift Y 64, the rest at default settings.  Place it above Element 30.

C/P Element 60 on to the canvas.  Rotate it 15 degrees to the right. 

C/P Element 63 on to to the canvas.  Place it towards the left but not all the way.   Apply a drop shadow using the following settings:  V3, H4, OP86, Blur 5, color #972524

C/P Element 64 on to the canvas.  Place it on the right side.

C/P Element 104 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

Add some drop shadows to the elements, using any setting you would like.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Emerald City

Emerald City
©Barbara Butler
October 2014

Supplies:
Kit-Emerald by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask:  WSL375

New Image 800X600 72DPI.

Select all, paste Pp22 into the selection and select none.  Apply the mask and merge the group.  Re size it by 75%.

Select all, float, defloat.  Add a new layer and paste Pp1 into the selection, select none.  Change the blend mode to Luminance (L).  Re size it by 75%.

C/P Element 154 on to the canvas.  Using the deform tool move the nodes to where you would like. 

C/P Element 160 on to the canvas.  Place it behind Element 154 on the bottom and add a drop shadow with a light green.  Add a gradient glow using the same light green as in the drop shadow.

C/P Element 165 on to the canvas.  Re size it by 65% once.  Place it on the left side and rotate it 15 degrees to the left.

C/P Element 179 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

C/P Element 177 on to the canvas.  Re size it by 65% twice.  Place it on the right side and behind Element 179.

C/P Element 186 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 170 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the right and place it on the top right.

C/P Element 142 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

C/P Element 140 on to the canvas.  Place it on the bottom and in front of the other elements.  Add the same gradient glow as before.

C/P Element 135 on to the canvas.  Re size it by 75% once.  Place it on the bottom left and behind the other elements.

C/P Element 98 on to the canvas.  Re size it by 75% once.  Place it on the top left.

C/P Element 53 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the dog.

C/P Element 133 on to the canvas.  Re size it by 65% once.  Place it on the right side and behind the other elements.

C/P Element 173 on to the canvas.  Place it on the bottom and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Time For Giving

Time For Giving
©Barbara Butler
October 2014

Supplies:
Kit-Beauty of Thanks by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  124 by Millies PSP Madness.  You can fine the link to her site over on the side.

Open up the template and make sure it is at 72DPI.  Duplicate it and close the original.  Resize the canvas to a 800 width, the height will adjust itselft.  Delete the copyright layer.

Layers 1&4:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Layer 2:  Select all, float, defloat.  Paste Pp7 into the selection, select none.

Layer 3:  Select all, float, defloat.  Paste Pp5 into the selection, select none.

Layers 7&8:  Select all, float, defloat.  Paste Pp12 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Layer 9:  Select all, float, defloat.  Paste Pp9 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Using a darker color from the tag add a gradient glow.

Layers 5&6:  Select all, float, defloat.  Paste Pp10 into the selection, select none.

Add the following Drop Shadow to the paper layers:  V&H3, OP81 Blur 6 Color#5d3e1f.  Repeat this one more time but set the V&H to a -3.  Do not add one to Layer 5&6.

Add another drop shadow to the word art with the following setting 2, 2, 50, 2

C/P Element 2 on the canvas.  Re size it by 65% twice.  Place it on the bottom right.  Add a drop shadow with the following settings -3, -3, 81, 6.

C/P Element 4 on to the canvas.  Re size it by 65% once.  Place it on the left side.  Add a drop shadow with the following settings 3, 3, 81, 6.

C/P Element 14 on to the canvas.  Re size it by 75% twice.  Place it on the top of Element 2.  Add the same drop shadow as before.

C/P Element 19 on to the canvas.  Re size it twice, once by 65% then by 75%.  Flip it horizontally and place it on the bottom right and behind the turkey.

C/P Element 25 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 29 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and in front of the other elements.

C/P Element 34 on to the canvas.  Re size it by 75% three times.  Place it on the right side and behind the pie.

C/P Element 61 on to the canvas.  Re size it by 75% twice.  Place it on the right side and behind the other elements except the scarecrow.

C/P Element 59 on to the canvas.  Re size it by 75% once.  Place it on the left side and behind the other elements.  Rotate it 15 degrees to the left.

C/P Element 5 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Alanna

Alanna
©Barbara Butler
October 2014

Supplies:
Kit-Alanna by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  602 by Millies PSP Madness.  You can fine the link to her site over on the side.

Open the template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Re size the canvas to 889 in width, make sure the lock aspect ratio is checked and the height will adjust itself.  Delete the copyright layer.

Layers 2&3:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

Layer 4:  Select all, float, defloat.  Paste Pp2 into the selection, select none.

Layers 6,8,10:  Move 10 and 8 down so they're on top of 6 and merge the three together.  Select all, float, defloat.  Paste Pp14 into the selection, select none.

Layers 7,9,11:  These three should be near each other in the layer palette already.  Merge them together.  Select all, float, defloat.  Paste Pp15 into the selection, select none.

Layer 5:  Select all, float, defloat.  Paste Pp17 into the selection, select none.

Layer 1:  Select all, float, defloat.  Paste Pp16 into the selection, select none.

C/P Element 3 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

C/P Element 4 on to the canvas.  Re size it by 75% twice.  Flip it horiazontally and place it on the bottom right.

C/P Element 8 on to the canvas.  Re size it twice once by 75% then again by 65%.  Place it on the left side.

C/P Element 9 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and behind Element 8.

C/P Element 13 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 33 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the other elements.

C/P Element 43 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

C/P Element 46 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and in front of the other elements.

C/P Element 64 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 81 on to the canvas.  Re size it by 65% once.  Flip it horizontally, place it on the bottm right and behind the other elements.

C/P Element 113 on to the canvas.  Re size it by 65% once.  Place it on the top left.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Miss Toxic

Miss Toxic
©Barbara Butler
October 2014

Supplies:
Kit-Miss Toxic by Amy Marie.  This kit can be found at www.amymarieskits.com

Instructions:
 New Image 800X600 72DPI

C/P Element 4 on to the canvas.  Leave it where it is.

C/P Element 8 on to the canvas.  Re size it by 75% once.  Place it on the bottom.

C/P Element 6 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

C/P Element 17 on to the canvas.  Re size it by 65% twice.  Place it to the right and behind Element 6.

C/P Element 20 on to the canvas.  Re size it by 65% once.  Place it on the left side and behind the other elements.

C/P Element 22 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it behind the other elemetns except Element 4.

C/P Element 26 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the other elements.

C/P Element 42 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C/P Element 53 on to the canvas.  Re size it by 75% twice.  Place it on the right side.

C/P Element 60 on to the canvas.  Re size it by 75% twice.  Place it behind the other elements except the gate.

C/P Element 66 on to the canvas.  Re size it by 65% three times.  Place it on the top right.

C/P Element 85 on to the canvas.  Re size it by 65% once.  Place it on the bottom and in front of the other elements.

C/P Element 140 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it behind the black cat.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Spooky Fun

Spooky Fun
©Barbara Butler
October 2014

Supplies:
Kit-Halloween Night by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:Spooky Fun by Dee.  You can fine the link on the side.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Delete the white background, copyright and font info layers.  Re size the canvas to a 800 width, the height will adjust itself.

Top 1/2 Cirlce Blue:  Select all, float, defloat.  Paste Pp5 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this step for the Bottom blue 1/2 Circle.

Long Right Orange Strip:  Select all, float, defloat.  Paste Pp7 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this step for the Left Long Orange Strip.

Center Purple Strip:  Select all, float, defloat.  Paste Pp19 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Top Purple Square:  Select all, float, defloat.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this for the Bottom Purple Square.

Top Right Green Square:  Select all, float, defloat.  Paste Pp14 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this step for the Left Green Square.

Bottom Purple Rectangle:  Select all, float, defloat.  Paste Pp6 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Green Oval:  Select all, float, defloat.  Paste Pp1 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Swirl:  Select all, float, defloat.  Paste Pp16 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.  Repeat this step for the Stars.

Word Art Layers:  Want Some flood fill with a color from the rest of the tag add a gradient glow of choice.  Do the same with the fun? layer (except the gradient glow).  The Spooky; using the Hue Map Tool change the colors to any color picked from the rest of the tag.  Merge them all together and re size it by 75% once.  Place it on the top left.

C/P Element 1on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

C/P Element 20 on to the canvas.  Re size it by 75% twice.  Place it on the top right.

C/P Element 25 on to the canvas.  Re size it by 75% once.  Place it on the bottom left and behind the other elements.

C/P Element 48 on to the canvas.  Re size it by 75% once.  Place it on the left side and in front of the other elements.  Rotate it 15 degrees to the left.

C/P Element 63 on to the canvas.  Re size it by 75% once.  Place it on the top left and behind the word art layer.

C/P Element 81 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

C/P Element 85 on to the canvas.  Re size it by 75% once.  Place it on the rigth side and behind the other elements.

C/P Element 86 on to the canvas.  Re size it by 65% twice.  Rotate it 15 degrees to the right and place to the right and behind the word art on the top left.

C/P Element 21 on to the canvas.  Place it behind the word art on the top left.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Warm Whispers

Warm Whispers
©Barbara Butler
October 2014

Supplies:
Kit-Warm Whispers by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84

New Image 800X600 72DPI

Select all and paste Pp17 into the selection, select none.  Apply the mask and merge the mask group.

C/P Element 7 on to the canvas.  Re size it by 65% three times.  Place it on the bottom right.

C/P Element 31 on to the canvas.  Place it on the bottom and behind Element 7.

C/P Element 32 on to the canvas.  Place it on top of Element 31.

C/P Element 44 on to the canvas.  Place it on the right side.

C/P Element 55 on to the canvas.  Place it on the left and behind the other elements.

C/P Element 58 on to the canvas.  Place it on the left side and behind Element 32.  Rotate it 15 degrees to the left.

C/P Element 64 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 71 on to the canvas.  Re size it by 65% twice.  Place it on the left side and in front of the other elements.

C/P Element 73 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it behind the elements on the right side.

C/P Element 78 on to the canvas.  Re size it by 65% twice.  Place it on the left side.

C/P Element 85 on to the canvas.  Re size it by 65% twice.  Flip i t horizontall and place it in front of the tree on the right side.

C/P Element 84 on to the canvas.  Re size it by 65% once.  Flip it horizontally and in front of Element 78 on the left side.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Midnight Roses

Midnight Roses
©Barbara Butler
October 2014

Supplies:
Kit-Midnight Roses by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI.

C/P Element 56 on to the canvas.  Re size it by 75% twice.  Click on the inside with the magic wand and expand the selection by 6.  Add a new layer and paste Pp4 into the selection, select none.  Move the paper below the frame.  Duplicate both the frame and paper, flip them horizontally and place them on the left side.

C/P Element 36 on to the canvas.  Re size it by 65% twice.  Place it in the middle of the two frames.

C/P Element 35 on to the canvas.  Place it on the left side and behind everything else.

C/P Elementy 47 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side and in front of the other elements.

C/P Element 48 on to the canvas.  Place it behind the other elements.

C/P Element 52 on to the canvas.  Re size it by 65% once.  Place it on the right side and in front of the other elements.

C/P Element 75 on to the canvas.  Re size it twice, once by 65% then by 75%,  Place it on the right side of the candle.  Rotate it 15 degrees to the left.

C/P Element 89 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the left side of the candle.

C/P Element 95 on to the canvas.  Flip it horizontally and place it on the right side and behind everything else.

C/P Element 97 on to the canvas.  Place it on the bottom and behind the other elements.

C/P Element 99 on to the canvas.  Re size it by 65% twice.  Place it in the middle of the frames and in front of the other elements.

C/P Element 115 on to the canvas.  Re size it by 65% twice.  Place it on the right side and in front of the other elements.

C/P Element 113 on to the canvas.  Re size it by 65% once.  Place it on the top left of the left frame.

C/P Element 123 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind Element 46.

C/P Element 96 on to the canvas.  Re size it by 75% twice.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Autumn View

Autumn View
©Barbara Butler
October 2014

Supplies:
Kit-Autumn View by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  I Love Autumn By Dee.  You can fine the link to her site over on the side.

Open up template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Re size the canvas to a 852 width the height will adjust itself.  Delete the copyright layer.

Yellow Rectangles:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Small Creme Rectangles:  Select all, float, defloat.  Paste Pp10 into the selection, select none.

Orange Circle:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

Pink Oval:  Select all, float, defloat.  Paste Pp13 into the selection, select none.

Red Heart:  Select all, float, defloat.  Paste Pp21 into the selection, select none.

Orange Rectangle:  Select all, float, defloat.  Paste Pp17 into the selection, select none.

Creme Heart and Oval:  Select all, float, defloat.  Paste Pp22 into the selection, select none.

I Love Word Art:  Select all, float, defloat.  Paste Pp22 into the selection, select none.  Apply a white gradient glow.

C/P Element 2 on to the canvas.  Place it on the bottom right and behind everything else.

C/P Element 6 on to the canvas.  Re size it by 65% twice.  Place it on the top left and in front of everything else.

C/P Element 8 on to the canvas.  Place it on the left side.

C/P Element 11 on to the canvas.  Flip it horizontally and place it on the bottom of the Autumn Word Art layer.

C/P Element 35 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

C/P Element 38 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom left.  Rotate it 15 degrees to the left.

C/P Element 70 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom right.

C/P Element 86 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and behind Element 70.

C/P Element 92 on to the canvas.  Place it on the right side and behind the other elements.

C/P Element 98 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 102 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the other elements.

C/P Element 110 on to the canvas.  Re size it by 65% once.  Place it on the bottom left and in front of the other elements.

C/P Element 118 on to the canvas.  Re size it by 65% once.  Place it on the right side.

C/P Element 119 on to the canvas.  Re size it by 65% twice.  Place it on the left side and behind the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  Depending on the tube you use you might have to move some elements around a little bit and that is okay.  Like I had to do with flower on the bottom.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Autumn Rose

Autumn Rose
©Barbara Butler
October 2014

Supplies:
Kit-Autumn Roses by Amy Marie.  This kit can be found at www.amymarieskits.com
Template:  Autumn Smile by Dee.  You can fine the link to her site on the side.

Open template and check to make sure it is at 72 DPI.  Duplicate it and close the orignal.  Delete the copyright layer.  Re size the canvas to a 800 width the height will adjust itself.

Raster 16 and Copy of Raster 16:  Select all, float, defloat.  Paste Pp12 into the selection, select none.

Rasters 22 and 23:  Select all, float, defloat.  Paste Pp19 into the selection, select none.

Raster 17 and Copy of Raster 17:  Select all, float, defloat.  Paste Pp8 into the selection, select none.

Raster 5 and Copy of Raster 5:  Select all, float, defloat.  Paste Pp1 into the selection, select none.

Raster 18 and COpy of Raster 18:  Select all, float, defloat.  Paste Pp14 into the selection, select none.

Copy of Raster 10:  Select all, float, defloat.  Paste Pp13 into the selection, select none.

Rasters 20 and 21:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Raster 10:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Raster 1 and Copy of Raster 1:  Select all, float, defloat.  Paste Pp18 into the selection, select none.

Raster 2 and Copy of Raster 2:  Select all, float, defloat.  Paste Pp13 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Raster 9:  Select all, float, defloat.  Paste Pp17 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layer.

Raster 4:  Select all, float, defloat.  Hit the delete key a couple of times and paste Pp17 into the selection, select none.

Raster 3:   Select all, float, defloat.  Paste Pp15 into the selection, select none.

Raster 19 and Copy of Raster 19:  Select all, float, defloat.  Paste Pp15 as a new layer, invert the selection and hit the delete key, select none.  Close or delete the original layers.

Raster 27 Copy:  Using the Hue/Saturation/Lightness tool change the colors to a shade you like.

Small Word Art Layers:  Now pick a light and dark color from the word autumn and add new layers to each of the others and flood fill each.  I used a light color for the loveliest smile layer and a dark color for the layer right below that one.  And the same light color for the other one.  But you can use what ever color combo you like.

Raster 14:  Using the same technique as on Raster 27 apply the same shade.

Rasters 6, 8, and 13:  Change the colors to a gradient foreground-background settings on linear angle:  45 repeat:  1.  Flood fill each with the gradient.

C/P Element 2 on to the canvas.  Re size it by 50% once.  Place it on the right side and in front of the word art layers.

C/P Element 7 on to the canvas.  Re size it by 50% once.  Place it on the right side.

C/P Element 13 on to the canvas.  Place it on the bottom and behind the word art layers.

C/P Element 11 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the right and place it on the left side and behind the word art.

C/P Element 16 on to the canvas.  Re size it by 75% once.  Place it to the left and behind Element 11.

C/P Element 41 on to the canvas.  Place it on the left side and behind the other elements.

C/P Element 45 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the right and place it on the right side.

C/P Element 75 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right of Element 11.

C/P Element 109 on to the canvas.  Re size it by 75% twice.  Place it on the left side and in front of the other elements.

Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.

Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.