Happy Days

Happy Days
©Barbara Butler
January 2014

Kit- 7 of 2014 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-Mask16 by Brutal Designs

New Image 800X600 72DPI

01.  Paste Pp3 on to the canvas.  Apply mask and merge mask group.  Paste Pp4 on to the canvas.  Apply the same mask and merge the group.  Change the blend mode to multiply.

02.  Paste Element 4 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

03.  Paste Element 3 on to the canvas.  Re size it by 65% twice.  Place it behind the shoes.  Flip it horizontally.

04.  Paste Element 14 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom right.

05.  Paste Element 13 on to the canvas.  Re size it by 65% once.  Place it behind the elements on the left side.

06.  Paste Element 35 on to the canvas.  Place it behind the car on the right side.

07.  Paste Element 56 on to the canvas.  Place it behind the jukebox so it looks like it is coming out of it.

08.  Paste Tube(s) on to the canvas.  Re size it as needed and place to your liking.  Add copyright.

09.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you have enjoyed it.

Fairytale Dreams

Fairytale Dreams
©Barbara Butler
January 2014

Kit-Unicorns and Fairies by Amy Marie.  This amazing kit can be found at www.amymarieskits.com
Mask-Mask 6 from Brutal Designs.  It is apart of Mask set 1.

New Image 800X600 72DPI

01.  Select all, paste Pp25.  Apply the mask and merge mask group.

02.  Paste Element 33 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.

03.  Paste Element 9 on to the canvas.  Re size it twice, once by 65% then by 75%.  Place above Element 33.

04.  Paste Element 26 on to the canvas.  Re size it by 65% once.  Place it behind the fairy.

05.  Paste Element 35 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

06.  Paste Element 38 on to the canvas.  Place it on the right side and behind the fairy and the chest.

07.  Paste Element 54 on to the canvas.  Flip it horizontally and place it on the left side behind Element 35.

08.  Paste Element 53 on to the canvas.  Move it over to the right a little bit. Place it behind the other elements. 

09.  Paste Element 56 on to the canvas.  Place it between Elements 35 and 54 on the left side.

10.  Paste Element 63 on to the canvas.  Place it on the left side.

11.  Paste Element 86 on to the canvas.  Place it behind the elements on the left side.

12.  Paste Element 102 on to the canvas.  Flip it horizontally and place it on the left side.

13.  Paste Tube(s) on the canvas.  Re size if necessary.  Place to your liking.  Add copyright.

14.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag if necessary.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Strawberry Dreams

Strawberry Dreams
©Barbara Butler
January 2014

Kit-Strawberry Dreams by Amy Marie.  This beautiful kit can be found at www.amymarieskits.com
Mask-Mask Set 1 by Brutal Designs

New Image 800X600 72DPI

01.  Paste Pp6 on to the canvas.  Apply the mask and merge the mask group.

02.  Paste Element 50 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

03.  Paste Element 56 on to the canvas.  Re size it by 75% once.  Place it on the right side and behind Element 50.

04.  Paste Element 88 on to the canvas.  Place it on the bottom left.  Duplicate it, flip horizontally and place it on the right side.

05.  Paste Element 96 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind Element 50.

06.  Paste Element 100 on to the canvas.  Re size it by 65% once.  Place it on the right side.

07.  Paste Element 105 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

08.  Paste Element 114 on to the canvas.  Re size it twice.  Once by 50% then again by 65%.  Place it beside the picnic basket.

09.  Paste Element 120 on to the canvas. Re size it by 50% twice.  Place it on the left side and in front of Element 105.

10.  Paste Element 126 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.  Duplicate it, flip horizontally and place this one on the left side.

11.  Paste Tube(s) of choice on to the canvas.  Re size it as needed.  Place to your liking.  Add copyright.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you have enjoyed it.

Truly Elegant

Truly Elegant
©Barbara Butler
January 2014

Kit-Elegance by Amy Marie.  This beautiful kit can be found at www.amymarieskits.com
Template-Template 15 by Candylicious Designz.  candyliciousdesignz.blogspot.com.  I've had this for awhile so I'm not sure if the link is still valid.  If the blog has closed or moved feel free to use something else.

Open template and make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.

01.  Black Rectangle:  Select all, float, defloat.  Paste Pp26 into the selection.  Select none.

02.  Blue Circle:  Select all, float, defloat.  Paste Pp21 into the selection.  Select none.

03.  Purple Rectangle:  Select all, float, defloat.  Paste Pp16 into the selection.  Select none.

04.  White Square Frame:  Select all, float, defloat.  Paste Pp13 into the selection.  Select none.

05.  Purple Right and Left Circles:  Select all, float, defloat.  Paste Pp5 into the selection.   Select none.

06.  Paste Element 1 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

07.  Paste Element 4 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

08.  Paste Element 5 on to the canvas.  Re size it by 75% once.  Place it on the right side of the table.

09.  Paste Elements 7&8 on to the canvas.  Re size 8 by 75% once.  Merge them together.  The re size them by 75% and place them ontop of the table.

10.  Paste Element 10 on to the canvas.  Place it on the top right and below the rectangles.

11.  Paste Element 16 on to the canvas.  Re size it three times once by 65% then twice by 75%.  Place behind the glass on the left side.

12.  Paste Element 19 on to the canvas.  Re size it by 60% twice.  Place it in front of the glass.

13.  Paste Element 20 on to the canvas.  Re size it by 60% twice.  Place behind the other elements on the left side.

14.  Paste Element 21 on to the canvas.  Re size it by 60% once.  Place it on the top left corner of the rectangles.

15.  Paste Element 24 on to the canvas.  Place it on the right side.

16.  Back on the frame layer use your magic wand and click on the inside of the left side frame.  Expand the selection paste a CU of your tube of choice, re size it as needed, duplicate it, back on the original change the gaussian blur to about 5, back on the duplicate and change the blend mode to Luminance (L).  Back on the original and duplicate it and place it on the right side, do the same with the first duplicate.

17.  Paste main tube on to the canvas.  Re size it as needed and place it to your liking.  You might have to move some of the elements around.  Add copyright.

18.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

True Love

True Love
©Barbara Butler
January 2014

Kit-Six 2014 by Amy Marie.  This kit can be found at www.amymarieskits.com
Mask-WSL84


New Image 800X600 72DPI

01.  Paste Element 6 on to the canvas.  Re size it by 65% once. 

02.  Paste Element 4 on to the canvas.  Re size it by 65% once.  Flip it horizontally and put it on the bottom left.

03.  Paste Pp19 on to the canvas.  Apply the mask and merge the mask group.  Place behind the other elements.

04.  Paste Element 18 on to the canvas.  Flip it horizontally and place it in front of Element 6.

05.  Paste Element 21 on to the canvas.  Re size it by 75% twice.  Place it behind the cat on the left side.  Flip it horizontally.

06.  Paste Element 28 on to the canvas.  Re size it by 65% twice.  Place it above the left door.  Duplicate it twice and merge the three together.  Duplicate it once and place this one over the right door.

07.  Paste Element 33 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and below Element 21.

08.  Paste Element 49 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the right side.

09.  Paste Element 86 on to the canvas.  Re size it by 65% once.  Place it on the bottom and in front of the other elements.

10.  Paste Element 88 on to the canvas.  Re size it by 65% once.  Place it on the left side and below the other elements.

11.  Paste Element 70 on to the canvas.  Duplicate it twice and merge the three togther.

12.  Paste Tube(s) of choice on to the canvas.  Re size it as needed.  Place to your liking.

13.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Two Hearts

Two Hearts Three Piece Forum Set
©Barbara Butler
January 2014

Kit-5 of 2014 by Amy Marie.  This kit can be found at www.amymarieskits.com
Temp-ValForum set by Lady Queen.  Can be found at http://ladyqueenspspcreations.blogspot.com/
Mask-WSL84

Open up templates and make sure its at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.

Tag-
01.  Top and Bottom Rec:  Using the magic wand click on the pink strip.  Paste Pp20 as a new layer, invert the selection and hit the delete key.  
Back on the original layers select all, float, defloat.  Paste Pp10 into the selection.  

02.  2 Heart:  Select all, float, defloat.  Paste Pp8 as a new layer.  Invert the selection and hit the delete key.  Select none.  Close or delete the original layer.
Click on the inside with the magic wand.  Expand it by 4 and paste Pp13 as a new layer.  Invert the selection and hit the delete key.  Select none.
Add an inner bevel of choice.

03.  Merge all the small heart layers together.  Select all, float, defloat.  Paste Pp3 into the selection.

04.  BG:  Select all and paste Pp18 into the selection.  Select none.  Apply the mask and merge the mask group.

05.  Word Art Layers:  Select all, float, defloat.  Hit the delete key a couple of  times and paste Pp5 into the selection.  Select none.  Add a drop shadow of choice.

06.  Paste Element 7 on to the canvas.  Re size it twice, once by 65% then by 75%.  Place it on the bottom left corner.

07.  Paste Element 11 on to the canvas.  Re size it by 75% twice.  Rotate it 15 degrees to the left and place it behind Element 7.

08.  Paste Element 14 on to the canvas.  Re size it by 75% twice.  Rotate it 15 degrees to the left twice.  Place it on the left side in between the other two elements.

09.  Paste Element 24 on to the canvas.  Re size it by 75% twice.  Rotate it 15 degrees to the left.Place it beside the hearts and on the left side.

10.  Paste Element 26 on to the canvas.  Re size it by 75% once.  Place it behind the violin on the left side.

11.  Paste Element 67 on to the canvas.  Re size it by 75% twice.  Place towards the left.

12.  Paste Tube(s) of choice on to the canvas.   
Go back to the heart frame layer.  Click on the bottom one with the magic wand.  Expand it by 4 and paste close ups invert the selection and hit the delete key.  Change the blend mode to fit the tube you have choosen.  Merge the frame, tubes, and paper layer together.  Re size it by about 75% once or twice which ever you like.
Go to the mask layer, select all, float, defloat.  Add a new layer and paste a close up of your tube into the selection.  Select none.  Change the blend mode of this one as well.





Banner-
01.  Frame 2:  Select all, float, defloat.  Paste Pp10 into the selection.  Repeat for Frame 1.

02.  2 Heart:  Select all, float, defloat.  Paste Pp8 as a new layer.  Invert the selection and hit the delete key.  Select none.  Close or delete the original layer.
Click on the inside with the magic wand.  Expand it by 4 and paste Pp13 as a new layer.  Invert the selection and hit the delete key.  Select none.

03.  Merge all the small heart layers together.  Select all, float, defloat.  Paste Pp3 into the selection.

04.  White Frame:  Select all, float, defloat.  Paste Pp16 as a new layer.  Invert the selection and hit the delete key.

05.  BG:  Select all, float, defloat.  Paste Pp18 into the selection.  Select none.

06.  Word Art Layers:  Select all, float, defloat.  Hit the delete key a couple of  times and paste Pp5 into the selection.  Select none.  Add a drop shadow of choice.

07.  Add any elements you would like.  You can add the same as the tag if you would like.

08.  Paste Tube(s) on to the canvas.  Re size it if needed.  Place to your liking.



Avatar-
01.  Frame 2:  Select all, float, defloat.  Paste Pp10 into the selection.  Repeat for Frame 1.

02.  Delete the heart layers.

03.  Paste Tube(s) of choice on to the canvas.  Re size it if needed.

Finishing Touches to all three
Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Strawberry Wine

Strawberry Wine
©Barbara Butler
January 2014

Kit-Strawberry Love by Amy Marie.  This kit can be found at www.amymarieskits.com

New Image 800X600 72DPI

01.  Paste Element 59 on to the canvas.  Re size it by 70% once.  Place it on the left side.  Click on the inside of the frame and expand the selection by 6.  Add a new layer and paste Pp20 into the selection.

02.  Paste Element 8 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the top left corner of the frame.  Rotate it 15 degrees to the right.

03.  Paste Element 10 on to the canvas.  Re size it by 50% once.  Place it in the bottom left corner of the frame.

04.  Paste Element 19 on to the canvas.  Re size it by 65% twice.  Place in the bottom right corner of the frame.

05.  Paste Element 38 on to the canvas.  Re size it by 65% twice.  Place it on the right side of the frame and below the puppy.

06.  Paste Element 47 on to the canvas.  Re size it by 65% twice.  Place it on the left side of the elements on the right side of the frame.

07.  Paste Tube(s) of choice on to the canvas.  Re size it if necessary.  Place to your liking.  Add copyright.

08.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you've enjoyed it.

Attractively Wicked

Attractively Wicked
©Barbara Butler
January 2014

Kit-Wicked Attraction by Amy Marie.  This kit can be found at www.amymarieskits.com.
Tube-Barbara by Very Many.  This tube can be found at www.picsfordesign.com.  Please do not use with out having the proper license to use it and buying it.
Mask-WSL84

New Image 800X600 72DPI

01.  Paste tube on to the canvas.  Re size it if necessary.

02.  Paste Element 125 on to the canvas.  Place below the tube.  Duplicate it twice.  Move one to the right and the other to the left.

03.  Paste Element 54 on to the canvas.  Place it on the left side.  Duplicate it and flip the duplicate horizontally and move it over on the right side.  Merge the two together and re size it by 85% once.  Place it behind the tube.  Repeat this step for the Element 55.  Except omit the re sizing.

04.  Paste Element 36 on to the canvas.  Place behind all the other elements.

05.  Paste Element 9 on to the canvas.  Re size it by 75% once.  Place it on the left side of Element 36.

06.  Paste Element 6 on to the canvas.  Rotate it 15 degrees to the right.  Place it on the right side.

07.  Paste Pp19 on to the canvas.  Apply the mask and merge the mask group.
Select all, float, defloat.  Paste Pp15 as a new layer, invert the selection and hit the delete key.  Change the blend mode to Luminance(L).

08.  Paste Element 31on to the canvas.  Re size it by 65% twice.  Place it on the left side of the tube.

09.  Paste Element 35 on to the canvas.  Re size it by 65% three times.  Place beside Element 31.

10.  Paste Element 84 on to the canvas.  Re size it by 65% twice.  Place it on the right side of the tube.

11.  Paste Element 100 on to the canvas.  Place it behind the other elements.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Make sure you add the copyright for the tube.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you have enjoyed it.

Purple Flora

Purple Flora
©Barbara Butler
January 2014

Kit-Two 2014 by Amy Marie.  This kit can be found at www.amymarieskits.com
Template-Crazy by Dee.  This template can be found at http://dagerouslydeliciousdesignz.blogspot.com


Open up the template and check to make sure it is at 72 DPI.  Duplicate it and close the original.  Delete the copyright and word art layers.

01.  Rust Strip:  Select all, float, defloat.  Paste Pp9 into the selection.  Select none.

02.  Creme Oval:  Select all, float, defloat.  Paste Pp14 into the selection.  Select none.

03.  Left Grey Square:  Select all, float, defloat.  Paste Pp15 into the selection.  Select none.

04.  Teal Strip:  Select all, float, defloat.  Paste pp12 as a new layer.  Invert the selection and hit the delete key.  Select none.  Close or delete the original layer.

05.  Right Grey Square:  Select all, float, defloat.  Paste Pp6 into the selection.  Select none.

06.  Teal Semi Circle:  Select all, float, defloat.  Paste Pp1 into the selection.  Select none.

07.  Brown Squares and Raster 9:  Select all, float, defloat.  Paste Pp13 into the selection.  Select none.

08.  Raster 11, Stars, and White Frame:  Select all, float, defloat.  Paste Pp10 into the selection.  Select none.

09.  Paste Element 6 on to the canvas.  Place it on the left side and send it to the bottom.

10.  Paste Element 15 on to the canvas.  Re size it twice once by 65% then again by 75%.  Place it on the left side.  Bring it to the top.

11.  Paste Element 14 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

12.  Paste Element19 on to the canvas.  Place below everything.

13.  Paste Element 24 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.  Bring it to the top.

14.  Paste Element 25 on to the canvas.  Re size it by 65% once.  Place it on the right and behind Element 24.

15.  Paste Element 51 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom right and in front of the other elements.

16.  Paste Element 70 on to the canvas.  Place it on the bottom and below the other elements.

17.  Paste Element 77 on to the canvas.  Place it below Element 70.

18.  Paste Element 91 on to the canvas.  Re size it by 65% twice.  Place it above the divider on the left.

19.  Paste Element 90 on to the canvas.  Re size it by 65% twice.  Flip it horizontally and place it on the bottom left.

20.  Add tube(s) of choice on to the canvas.  Re size it as needed.  Place to your liking.  Add copyright.

21.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Angelic Beauty

Angelic Beauty
©Barbara Butler
January 2014

Kit:  4-2014 by Amy Marie.  This is kit is filled with 127 gorgeous elements and 30 stunning papers.  This kit can be found at www.amymarieskits.com
Mask-WSL84
Tube-I'm using an Limited Edition Tube by Brigid Ashwood.  I got it from CDO.  It is no longer available but there are a numerous of tubes that would go perfect with this kit.
Plugin:  Porcelain


New Image 800X600 72DPI

01.  Select all.  Paste Pp25 into the selection.  Apply the mask and merge the mask group.

02.  Paste Element 20 on to the canvas.  Re size it by 75% once.  Click on the inside and expand the selection by 4.  Paste Pp22 as a new layer.  Invert the selection and hit the delete key. 
Select all, float, defloat.  Paste your tube of choice on to the canvas.  Re size it if needed.  Invert the selection and hit the delete key to get rid of any of the tube that is outside of the frame.  Select none.  Apply porclain settings set to fit your tube (if you dont have this plugin you can go ahead a skip this step).

03.  Paste Element 16 on to the canvas.  Re size it by 75% twice.  Place it on the bottom and to the right.  Make sure it is the top layer.  Repeat this step for Element 56 but flip this one horizontally and put it on the left side.

04.  Paste Element 15 on to the canvas.  Re size it by 65% once.  Place it on the top left of the frame.

05.  Paste Element 21 on to the canvas.  Re size it by 65% once.  Place it on the right side.  Rotate it 15degrees to the left.

06.  Paste Element 53 on to the canvas.  Re size it by 75% once.  Place it behind the frame layer and to the left side and rotate it 15 degrees to the left.

07.  Paste Element 60 on to the canvas.  Re size it by 40% once.  Place it on the bottom left and below the frame.

08.  Paste Element 75 on to the canvas.  Re size it by 40% once.  Bring it to the top and place it on the bottom right.

09.  Paste Element 76 on to the canvas.  Place it on the bottom of the canvas. 

10.  Paste Element 123 on to the canvas.  Re size it by 75% once.  Place it on the bottom left.

11.  Paste Element 61 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it on the right side and below the frame layer.  Rotate it 15 degrees to the right.

12.  Paste Element 63 on to the canvas.  Re size it by 75% once and place it behind the other elements.

13.  Add copyright layer.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the canvas as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you've enjoyed it.

Love Me

Love Me
©Barbara Butler
January 2014

Kit-Love Me by Amy Marie.  Can be found at www.amymarieskits.com
Mask-WSL307
Tube-Floral Anna Liwanag.  I bought this tube at PTE but I do believe you can now fine this one at CDO.


New Image 800X600 72DPI.


01.  Select all and paste Pp8 into the selection.  Apply the mask  and merge the mask group.  Re size it by 75%.

02.  Paste Element 60 on to the canvas.  Re size it by 75% once.  Place it on the left side.

03.  Paste Element 55 on to the canvas.  Re size it by 75% once.  Place it on the bottom right.  Duplicate and re size the duplicate it again by 75%, place it on the left side of the original.  Duplicate this one flip it horizontally and place this one on the right side.  Rotate the one on the right 15 degrees to the right and the one on the left rotate to the left.

04.  Paste Element 41 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

05.  Paste Element 38 on to the canvas.  Re size it by 45% once.  Flip it horizontally and place it on the bottom left and behind Element 41.

06.  Paste Element 26 on to the canvas.  Re size it by 75% once.  Place it behind the other elements but leave it in the middle of the canvas.  You might have to move the elements over so they rest on the window. 
Click on the inside of each slat, add a new layer and paste Pp1 into the selection.  Select none and move the paper layer down.
Back on the mask layer move it over to the right, duplicate it mirror it and move the duplicate to the left.

07.  Paste Element 5 on to the canvas.  Place it on the left side and below the frame.

08.  Paste Element 9 on to the canvas.  Re size it by 75% once.  Place it on the top right.

09.  Paste Element 17 on to the canvas.  Re size it by 65% once.  Place it in front of Element 55 on the bottom right.

10.  Paste W2 on to the canvas.  Place it on the left side.

11.  Paste Tube(s) on to the canvas.  Re size it as needed.  Place to your liking.  Add copyright.

12.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the canvas as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you have enjoyed it.

Always Be Beautiful

Always Be Beautiful
©Barbara Butler
January 2014

Kit-Melina by Amy Maries Kits.  This kit can be found at www.amymarieskits.com
Template-470mpm by Millies Psp Madness.  The template can be found at milliespspmadness.blogspot.com

Open up the template and make sure it is at 72DPI.  Duplicate it and close the orignal template.  Re size the canvas just a little bit so you can fit the elements on it.

01.  Word art layers:  Select all, float, defloat.  Hit the delete key a few times and paste the following papers Pp22 in the Beautiful layer, and Pp16 into the other two.  Select none. 
Back on the Beautiful word art layer Select all, float, defloat.  Go to selections, modify, borders and have the width set to 3, both sides checked anti alias checked, paste Pp16 as a new layer, invert the selection and hit the delete key.  Select none and move this layer down below the word art.

02.  Layers 5&6:  Select all, float, defloat.  Hit the delete key a couple of times and paste Pp14 into the selection.  Select none.

03.  Layers 1&2:  Select all, float, defloat.  Hit the delete key a couple of times and paste Pp9 into the selection.  Select none.

04.  Layer 4:  Select all, float, defloat.  Hit the delete key a couple of times and paste Pp2 into the selection.  Select none.

05.  Layer 3:  Select all, float, defloat.   Paste Pp15 into the selection.  Select none.

06.  Paste Element 2 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

07.  Paste Element 4 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right and below the word art.

08.  Paste Element 8 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the left and place it on the left side and below the other elements.

09.  Paste Element 12 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.

10.  Paste Element 17 on to the canvas.  Re size it by 65% once.  Place it the right side of Element 2.

11.  Paste Element 16 on to the canvas.  Re size it by 65% once.  Place it on the left side of Element 4.

12.  Paste Element 23 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom right and below the other elements.

13.  Go back Layer 4 Select all, float, defloat.  Add a new layer and paste Element 52 into the selection.  Change the blend mode to Soft Light and duplicate it.

14.  Paste Element 78 on to the canvas.  Place it on the right side.  Duplicate and mirror the duplicate.  Place it on the left side.

15.  Paste Tube(s) of choice on to the canvas.  Re size it as needed.  Place to your liking.  Add copyright.

16.  Add name and save as a pspimage.  Add any effects you would like.  Crop and resize the canvas as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Cuddle Cuddle Time

Cuddle Cuddle Time
©Barbara Butler
January 2014

Kit-Cuddle Me By Amy Marie.  This beautiful kit can be found at www.amymarieskits.com
Tube-Bride by Alex Prihodko.  This tube can be found at www.picsfordesign.com.  Please do not use without buying it and having the proper license.
Mask-WSL285


New Image 800X600 72DPI

01.  Select all, paste Pp16 into the selection.  Select none.  Apply the mask and merge the mask group.

02.  Paste Element 120 on to the canvas.  Re size it by 75% once.  Place it on the top right.

03.  Paste Element 121 on to the canvas.  Place it on the bottom.  Re size it by 75%.

04.  Paste Element 111 on to the canvas.  Re size it by 65% once.  Place on it on the top left and move it below Element 120 in the layer palette.  Delete some of the branch.

05.  Paste Element 110  on to the canvas.  Re size it by 65% once.  Place it on the bottom left but on the left side of Element121.

06.  Paste Element 108 on to the canvas.  Rotate it 15 degrees to the left and place it behind the elements on the left side.  Re size it by 75% once.

07.  Paste Element 95 on to the canvas.  Re size it by 65% once.  Rotate it 15 degrees to the right.  Place it on the right side.

08.  Paste Element 56 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

09.  Paste Element 32 on to the canvas.  Re size it by 65% twice.  Place it on the right side of Element 121.

10.  Paste Element 10 on to the canvas.  Re size it by 65% twice.  Place it behind the elements on the bottom right.

11.  Paste Element 3 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom left.

12.  Paste Tube(s) of choice on to the canvas.  Re size it as needed.  Place to your liking.  Add copyright.

13.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you enjoyed it.

My Sweet Valentine

My Sweet Valentine
©Barbara Butler
January 2014

Scrap Kit-I'm using Amy Marie's Three2014 for this tag.  You can fine this kit at www.amymarieskits.com
Mask-WSL86

New Image 800X600 72DPI

01.  Select all, paste Pp13 into the selection.  Select none.  Apply the mask and merge the mask group.

02.  Paste Element 5 on to the canvas.  Re size it by 65% once.  Place it on the bottom right.

03.  Paste Element 9 on to the canvas.  Re size it by 65% once.  Place it on the bottom right and behind the Element 5.

04.  Paste Element 11 on to the canvas.  Re size it by 65% once.  Place it on the right side of Element 5.

05.  Paste Element 25 on to the canvas.  Re size it by 65% twice.  Place it on the bottom right.

06.  Paste Element 29 on to the canvas.  Re size it by 65% once.  Place it on the top right and behind the other elements.

07.  Paste Element 79 on to the canvas.  Re size it by 65% once.  Place it on the right side.  Just above the heart element.

08.  Paste Tube(s) on to the canvas.  Re size it if necessary.  Place it to your liking.

09.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Dedicated to the One I Love

Dedicated to the One I Love
©Barbara Butler
January 2014

I'm using Amy Marie's 2014-1 kit for this tag.  You can fine it at www.amymarieskits.com
Template-ValentineTemp2 Dedicated by Dee of dangerouslydeliciousdesignz.blogspot.com
Tube-I'm using the artwork of Ismael Rac.  You can fine his work at www.xeracx.net.  Please do not use without buying the tubes and having the proper license to use it.

Open up the template and check to make sure it is at 72DPI.  Duplicate it and close the original.  Re size the canvas to about 849X764.  Delete the copyright layer and background.

01.  Top and bottom Dark Pink Square:  Select all, float, defloat.  Paste Pp6 into the selection.  Select none.

02.  Pink Heart:  Select all, float, defloat.  Paste Pp5 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

03.  Creme Rectangle:  Select all, float, defloat.  Paste Pp11 as a new layer.  Invert the seletion and hit the delete key.  Select none.  Delete or close the original layer.

04.  Right and Left Tan Circle:  Select all, float, defloat.  Paste Pp4 into the selection.  Select none.

05.  Dark Pink Rectangle:  Select all, float, defloat.  Paste Pp1 into the selection.  Select none.

06.  Gold Rectangle:  Select all, float, defloat.  Paste Pp9 into the selection.  Select none.

07.  Top and Bottom Pink Circle:  Select all, float, defloat.  Paste Pp7 into the selection.  Select none.

08.  Brown Rectangle:  Select all, float, defloat.  Paste Pp14 into the selection.  Select none.

09.  Right and Left Creme Strip:  Select all, float, defloat.  Paste Pp13 into the selection.  Select none.

10.  Top and Bottom Scroll:  Add a new layer and flood fill with a shade of pink.  Back on the scroll layers select all, float, defloat.  Invert the selection and back on the flood fill layer and hit the delete key.  Select none.  Delete or close the original layer.  Keep the d/s layers.

11.  Paste Element 6 on to the canvas.  Re size twice once by 65% then by 75%.  Place it on the bottom left.

12.  Paste Element 9 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom right.

13.  Paste Element 24 on to the canvas.  Re size it by 60% once.  Place it on the top left.  Add add a d/s of choice.

14.  Paste Element 23 on to the canvas.  Re size it by 60% once.  Place it on the left and below the shoe.

15.  Paste Element 26 on to the canvas.  Re size it by 60% twice.  Rotate it 15 degrees to the left.  Place it in front of the keyboard stairs.

16.  Paste Element 30 on to the canvas.  Re size it by 60% once.  Place it on the top right.

17.  Paste Element 48 on to the canvas.  Re size it by 60% twice.  Place it in front of the heart on the left side.

18.  Paste Element 46 on to the canvas.  Re size it by 60% once.  Place it on the top right.

19.  Paste Element 51 on to the canvas.  Re size it by 60% once.  Flip it horizontally and place it behind the flower on the bottom right and to the left.

20.  Paste Element 61 on to the canvas.  Place it on the left side and send it to the bottom (behind everything).

21.  Paste Element 86 on to the canvas.  Bring to the top.  Now move it below the elements on the top.

22.  Paste Element 92 on to the canvas.  Place it on the top right and behind the other elements.

23.  Paste Tube(s) on to the canvas.  Re size it if necessary.  Add any effects you would like.  I added a flare to the heart and jeans to the rectangle.

24.  Add name and save as a pspimage.  Add any other effects you would like.  Crop and re size the tag if needed.  Save as a png and you are done. 

Thank you for taking a look at my tut.  I hope you enjoyed it.

Lady In Red

Lady In Red
©Barbara Butler
January 2014

I'm using Amy Marie's Lady in Red kit for this tag.  You can fine this kit at www.amymarieskit.com
Template-Template238 By Kristin of Toxic Desirez.  This template can be found at http://toxicdesirez.blogspot.com

Open up template and make sure it is at 72DPI.  Duplicate it and close the original.  Delete the copyright layer.

01.  Raster 2:  Select all, float, defloat.  Paste Pp5 into the selection.  Select none.

02.  Raster 9:  Select all, float, defloat.  Paste Pp6 into the selection.  Select none.

03.  Raster 6 and Copy of Raster 6:  Select all, float, defloat.  Paste Pp19 into the selection.  Select none.

04.  Raster 7:  Select all, float, defloat.  Paste Pp20 into the selection.  Select none.  Repeat this step for Raster 8.

05.  Raster 10:  Select all, float, defloat.  Paste Pp21 into the selection.  Select none.

06.  Raster 11:  Select all, float, defloat.  Paste Pp3 as a new layer, invert the selection and hit the delete key.  Select none.  Delete or close the original layer.  Repeat this step for Raster 13.

07.  Raster 3:  Select all, float, defloat.  Paste Pp8 as a new layer, invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

08.  Raster 5:  Select all, float, defloat.  Paste Pp18 as a new layer.  Invert the selection and hit the delete key.  Select none.  Delete or close the original layer.

09.  Paste Element 4 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

10.  Paste Element 5 on to the canvas.  Re size it by 75% twice.  Place it on the right side of the circle.

11.  Paste Element 6 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

12.  Paste Element 14 on to the canvas.  Re size it by 75% once.  Place it on the bottom.

13.  Paste Element 12 on to the canvas.  Place it behind the elements on the left.

14.  Paste Element 29 on to the canvas.  Place it on the top and in front of the other elements.

15.  Paste Element 37 on to the canvas.  Re size it by 65% twice.  Place it on the left side of Element 14.

16.  Paste Element 41 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it behind Element 14.

17.  Paste Element 44 on to the canvas.  Re size it by 65% once.  Flip it horizontally and place it on the bottom left and in front of the gown.

18.  Paste Element 74 on to the canvas.  Place it on the top and behind the word art.

19.  Paste Element 99 on to the canvas.  Re size it by 50% once.  Flip it horizontally and place it on the bottom left.

20.  Paste Tube(s) of choice on to the canvas.  Re size it if needed.  Place to your liking.  Depending on the tube and your placement you might need to move some of the other elements around a little bit.  Add copyright.

21.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look atmy tut.  I hope you have enjoyed it.