Loving You

Loving You
©Barbara Butler
December 2013

Scrap-I'm using Amy Marie's LoveU kit for this tag.  You can fine this kit at www.amymarieskits.com
Tube-Cupid By Keith Garvey.  Please do not use without having the proper license to.  And without buying it.
Mask-  WSL86

New Image 800X600 72DPI

01.  Paste Pp8 on to the canvas.  Apply mask and merge the mask group.

02.  Paste Element 3 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.

03.  Paste Element 9 on to the canvas.  Re size it by 65% once.  Place it behind the clock.

04.  Paste Element 11 on to the canvas.  Place it on the bottom and below the other elements.

05.  Paste Element 13 on to the canvas.  Re size it by 65% twice.  Place it on the bottom left.  Rotate it 15 degrees to the left.  Place it below the ribbon.

06.  Paste Element 12 on to the canvas.  Re size it by 65% once. Place it behind the elements on the right side.  Rotate it 15 degrees to the right.

07.  Paste Element 14 on to the canvas.  Re size it by 50% once.  Place it on the left side and flip it horizontally.

08.  Paste Element 19 on to the canvas.  Move it to the right.

09.  Paste Element 18 on to the canvas.  Leave it right where it is at.

10.  Paste Element 28 on to the canvas.  Place it behind the dove on the righ side.

11.  Paste Element 41 on to the canvas.  Place on top of the paper layer.

12.  Paste Element 42 on to the canvas.  Bring it to the top and place it on the bottom of the other elements.

13.  Paste Element 52 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.

14.  Paste Tube(s) of choice on to the canvas.  Re size it if necessary.  Add copyright.

15.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag if needed.  Save as a png and you are done. 

Thank you for taking a look at my tut.  I hope you enjoyed it.

Beautifully Crazy

Beautifully Crazy
©Barbara Butler
December 2013

Scraps-I'm using the beautiful kit Crazy Beautiful by Amy Marie for this tag.  You can fine this at www.amymarieskits.com
Tube-Lily by Misticheskaya.  This tube can be found at www.picsfordesign.com
New Image 800X600 72DPI

01.  Paste Element 18 on to the canvas.  Click on the inside with the magic wand.  Expand the selection by 4, add a new layer paste Pp8 into the selection.  Select none.

02.  Paste Element 24 on to the canvas.  Re size it by 75% twice.  Place it on the bottom right.

03.  Paste Element 26 on to the canvas.  Re size it by 75% once.  Place it on the bottom and behind Element 24.

04.  Paste Element 46 on to the canvas.  Re size it by 75% once.  Place it on the left side and rotate it 15 degrees to the right.

05.  Paste Element 47 on to the canvas.  Re size it by 75% twice.  Rotate it 15 degrees to the left and place it in front of Element 46.

06.  Paste Element 51 on to the canvas.  Re size it by 75% twice.  Place it on the bottom left.

07.  Paste Element 84 on to the canvas.  Re size it by 75% once.  Place it on the right side and below the flower.

08.  Paste Element 83 on to the canvas.  Re size it by 65% once.  Place it behind the present on the left side.

09.  Paste Element 98 on to the canvas.  Re size it by 65% twice.  Place it on the left side of the flower on the right.

10.  Paste Element 86 on to the canvas.  Leave it right where it is at.

11.  Paste Element 13 on to the canvas.  Re size it by 65% once.  Place in front of the paper layer.  Change the blend mode to Luminance(L), add a drop shadow of choice.

12.  Paste Element 9 on to the canvas.  Place it in front of the frame layer.

13.  Paste Tube(s) of choice on to the canvas.  Re size it as needed.  Place to your liking.  Add copyright.

14.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag if necessary.  Save as a png and you are done. 

Thank you for taking a look at my tut.  I hope you enjoyed it.

Floral Surprise

Floral Surprise
©Barbara Butler
December 2013

I'm using the stunning White Flora kit by Amy Marie for this tag.  You can fine this kit at www.amymarieskits.com
Mask-WSL84
Tube-Bride by Alex Phrihodko.  This tube can be found at www.picsfordesign.com.  Please do not use without buying it and having the proper license.

New Image 800X600 72DPI

01.  Paste Element 1 on to the canvas.  Click on the inside of the window (including the shutters) with the magic wand.  Expand the selection by 4.  Paste Pp9 as a new layer.  Invert the selection and hit the delete key.

02.  Paste Pp14 as a new layer.  Apply the mask and merge the mask group.

03.  Paste Element 28 on to the canvas.  Re size it by 50% once and again by 75%.  Rotate it 15 degrees to the right.  Place it on the top right.

04.  Paste Element 33 on to the canvas.  Re size it by 50% once.  Place it on the bottom left.

05.  Paste Element 41 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.

06.  Paste Element 43 on to the canvas.  Re size it by 50% once.  Rotate it 15 degrees to the left.  Place it behind the pitcher on the right.

07.  Paste Element 48 on to the canvas.  Re size it by 75% once.  Rotate it 15 degrees to the left and place it behind Element 33 on the left side.

08.  Paste Element 70 on to the canvas.  Re size it by 75% once.  Place it on the top.

09.  Paste Element 72 on to the canvas.  Re size it by 65% once.  Place behind the pitcher and to the left.

10.  Paste Element 88 on to the canvas.  Re size it by 50% twice.  Flip it horizontally and place it front of Element 48.

11.  Paste Element 98 on to the canvas.  Re size it by 50% once.  Place it on the left side of the rose.

12.  Paste Element 100 on to the canvas.  Re size it by 50% once.  Place it behind the other elements on the right side.  But to the left of the pitcher.

13.  Paste Element 107 on to the canvas.  Place to your liking.

14.  Paste Element 62 on to the canvas.  Place it on the bottom and behind the other elements (except the window).

15.  Paste Element 47 on to the canvas.  Re size it by 50% twice.  Rotate it 15 degrees to the left and place it on the top left.

16.  Paste Element 14 on to the canvas.  Re size it by 75% once.  Flip horizontally and place it behind the elements on the bottom right.

17.  Paste Tube(s) of choice to the canvas.  Re size it as needed.  Place to your liking.  Add copyright.

18.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done. 

Thank you for taking a look at my tut.  I hope you have enjoyed it.

Victoria

Victoria
©Barbara Butler
December 2013

I'm using Amy Marie's kit Victoria for this tag.  You can fine this kit at www.amymarieskits.com
Tube:  Barbara by Very Many.  This tube can be found at www.picsfordesign.com.  Please do not use without having the proper license and buying it.

New Image 800X600 72DPI

01.  Paste Element 107 on to the canvas.  Move it down a little bit, but leave it in the middle of the canvas.  Take the magic wand and click on the inside of the frame.  Expand the selection by 4.  Paste Pp32 as a new layer.  Invert the selection and hit the delete key.  Move this below the frame.  Select none.

02.  Paste Element 14 on to the canvas.  Re size it by 75% twice.  Place it on the left side.

03.  Paste Element 135 on to the canvas.  Place behind the frame.  Duplicate it and move it over to the left.

04.  Paste Element 136 on to the canvas.  Place it on the left side and below the frame.  Duplicate it and mirror it.

05.  Paste Element 182 on to the canvas.  Re size it b 85%.  Rotate it 15 degrees to the left.  Place it behind the dragon.

06.  Paste Element 184  on to the canvas.  Re size it by 50%.  Place it on the top left.

07.  Paste Element 168 on to the canvas.  Bring it to the top and place it on the right side.

08.  Paste Element 132 on to the canvas.  Re size it by 75% once.  Place it on the top right.

09.  Paste Element 123 on to the canvas.  Place it on the bottom right.

10.  Paste Element 87 on to the canvas.  Place it on the bottom and behind everything else.

11.  Paste Element 61 on to the canvas.  Re size it by 75% once.  Flip it horizontally and place it beside the dragon on the left side.

12.  Paste Element 45 on to the canvas.  Then paste Element 44 on to the canvas, re size this one by 95% once.  Merge the two together.  Then re size it by 75% once.  Place it on the bottom right and in front of the other elements.

13.  Paste Element 17 on to the canvas.  Re size it by 75% once.  Place it on the top left.

14.  Paste Element 19 on to the canvas.  Re size it by 75% twice.  Place it behind the skulls on the right side.

15.  Paste Tube(s) on to the canvas.  Re size it if needed.  Place to your liking.  Add copyright.

16.  Add name and save as a pspimage.  Add any effects you would like.  Crop and re size the tag as needed.  Save as a png and you are done.

Thank you for taking a look at my tut.  I hope you enjoyed.

Fairytale Love

Fairytale Love
©Barbara Butler
December 2013

I'm using Amy Marie's GORGEOUS Love N Fairyland kit for this tag.  You can fine this kit at www.amymarieskits.com
Mask:WSL148
Tube:  Princess and Dragon(this is an exclusive) and can be found at picsfordesign.com.  Please do not use this tube unless you have the proper license to use it.


New Image 800X600 72DPI

01.  Select all, paste Pp13 into the selection.  Apply the mask and merge the mask group. 

02.  Paste Tube on to the canvas.  Re size it as needed.

03.  Paste Element 1 on to the canvas.  Re size it by 75% once.  Place it on the left side.

04.  Paste Element 4 on to the canvas.  Re size it by 65% twice.  Place it on the top right.

05.  Paste Element 9 on to the canvas.  Re size it by 65% once.  Place it on the bottom left.

06.  Paste Element 2 on to the canvas.  Re size it by 50% twice.  Place it on the top left.

07.  Paste Element 12 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.

08.  Paste Element 13 on to the canvas.  Re size it by 65% once.  Rotate it 30 degrees to the right.  Place it on the left side of the tube.

09.  Paste Element 15 on to the canvas.  Re size it by 65% twice.  Place it on the top left.

10.  Paste Element 30 on to the canvas.  Place it on the bottom.

11.  Paste Element 31 on to the canvas.  Place behind the mushroom house.

12.  Paste Element 47 on to the canvas.  Place it on the right side and behind the other elements.

13.  Paste Element 57 on to the canvas.  Re size it by 65% once.  Place it on the right side.

14.  Paste Element 59 on to the canvas.  Re size it by 65% once.  Place it on the bottom.

15.  Paste Element 77 on to the canvas.  Re size it by 65% once.  Place it on the bottom and in front of the other elements.

16.  Paste Element 79 on to the canvas.  Re size it by 50% once.  Place it on the bottom right.

17.  Add copyright.  Add name and save as a pspimage.   Add any effects you would like.  Crop and re size the tag if necessary.  Save as a png and you are done.

Thank you for taking a look at my tut.  Hope you enjoyed.